Detail publikace

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

ŠIMONOVÁ, H. KUCHARCZYKOVÁ, B. BÍLEK, V. KOCÁB, D.

Originální název

Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Typ

abstrakt

Jazyk

angličtina

Originální abstrakt

This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements

Klíčová slova

alkali-activated slag, frcature test, mortar

Autoři

ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.

Vydáno

13. 11. 2019

Nakladatel

Technická univerzita v Košiciach

Místo

Košice

ISBN

978-80-553-3413-4

Kniha

SPACE 2019

Strany od

1

Strany do

1

Strany počet

1

BibTex

@misc{BUT160104,
  author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}",
  title="Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand",
  booktitle="SPACE 2019",
  year="2019",
  pages="1--1",
  publisher="Technická univerzita v Košiciach",
  address="Košice",
  isbn="978-80-553-3413-4",
  note="abstract"
}