Detail publikace

Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods

MOURALOVÁ, K. HRABEC, P. BENEŠ, L. OTOUPALÍK, J. BEDNÁŘ, J. PROKEŠ, T. MATOUŠEK, R.

Originální název

Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Wire electrical discharge machining is an unconventional machining method for the production of complex-shaped and very precise parts. Because of the high energy consumption of this machining process, it is necessary to maximize the cutting speed for its appropriate implementation. The abrasion-resistant steel Creusabro 4800 was chosenas the test material for this experiment, which is widely used especially for machines working in mines and quarries.In order to maximize the cutting speed, a fuzzy inference system (FIS) has been built, which uses 18 expert propositions to “model” the cutting speed based on fiveselected input parameters: gap voltage, pulse on time, pulse off time, discharge current, and wire feed. The obtained results were further verified by a design of experiment consisting of 33 tests for fiveselected input factors. Using the fuzzy inference system, the optimum machine parameters setup was found to maximize the cutting speed, in which the gap voltage = 60 V, pulse on time = 10 µs, pulse off time = 30 µs, wire feed = 10 m∙min−1 and discharge current = 35 A. The predicted value of the cutting speed using the fuzzy inference system is 6.471 mm∙min−1.

Klíčová slova

WEDM (wire electrical discharge machining); electrical discharge machining; fuzzy inference system; FIS; Creusabro; cutting speed; design of experiment

Autoři

MOURALOVÁ, K.; HRABEC, P.; BENEŠ, L.; OTOUPALÍK, J.; BEDNÁŘ, J.; PROKEŠ, T.; MATOUŠEK, R.

Vydáno

4. 1. 2020

Nakladatel

MDPI

Místo

Švýcarská konfederace

ISSN

2075-4701

Periodikum

Metals

Ročník

10

Číslo

1

Stát

Švýcarská konfederace

Strany od

1

Strany do

11

Strany počet

11

URL

https://www.mdpi.com/2075-4701/10/1/92

Plný text v Digitální knihovně

http://hdl.handle.net/11012/189012

BibTex

@article{BUT161051,
  author="Kateřina {Mouralová} and Pavel {Hrabec} and Libor {Beneš} and Jan {Otoupalík} and Josef {Bednář} and Tomáš {Prokeš} and Radomil {Matoušek}",
  title="Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods",
  journal="Metals",
  year="2020",
  volume="10",
  number="1",
  pages="1--11",
  doi="10.3390/met10010092",
  issn="2075-4701",
  url="https://www.mdpi.com/2075-4701/10/1/92"
}