Detail publikace

Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert

MAJERÍK, J. BARÉNYI, I. SEDLÁK, J.

Originální název

Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert

Typ

článek v časopise ve Scopus, Jsc

Jazyk

angličtina

Originální abstrakt

The article of authors is concentrated to an analysis of the certain topics connected with the process of finish turning, which are: finishing as a technological process, purpose-built machining, tool wear and tool life of cutting materials, criteria of flank wear, measuring methods of wearing of the cutting tools, types of the cutting materials and their using in the common practise. In the theoretical part of this article, there are results of different studies published, for which the goal was to review the dependency of cutting parameters on the tool life of the cutting material, comparison of the flank wear of stated cutting materials during certain cutting parameters of the process, analysing of the results of experiments oriented to tool life of cutting materials. In practical part, there is the description of particular parts connected with the own performed experiments, for which the aim was to determine the proper cutting parameters for the process of finish turning of hardened material by the hard-cutting material on the base of polycrystalline cubical boron nitride, evaluation and analysis of the results, determination of the conclusions from performed experiments and particular recommendations for the effective using of investigated cutting material.

Klíčová slova

hard finish turning; cutting speed; flank wear; cubical boron nitride

Autoři

MAJERÍK, J.; BARÉNYI, I.; SEDLÁK, J.

Vydáno

23. 10. 2019

Nakladatel

Elsevier

Místo

Austria

ISSN

1726-9679

Periodikum

Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists

Ročník

30

Číslo

1

Stát

Rakouská republika

Strany od

0215

Strany do

0222

Strany počet

8

URL

https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2019/028.pdf

BibTex

@article{BUT161262,
  author="MAJERÍK, J. and BARÉNYI, I. and SEDLÁK, J.",
  title="Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert",
  journal="Inteligent Manufacturing and Automation: Focus on Young Researches and Scientists",
  year="2019",
  volume="30",
  number="1",
  pages="0215--0222",
  doi="10.2507/30th.daaam.proceedings.028",
  issn="1726-9679",
  url="https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2019/028.pdf"
}