Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
PLICHTA, T. ŠIRJOVOVÁ, V. ZVONEK, M. KALINKA, G. ČECH, V.
Originální název
The adhesion of plasma nanocoatings controls the shear properties of GF/polyester composite
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
angličtina
Originální abstrakt
High-performance fibre-reinforced polymer composites are important construction materials based not only on the specific properties of the reinforcing fibres and the flexible polymer matrix, but also on the compatible properties of the composite interphase. First, oxygen-free (a-CSi:H) and oxygen binding (a-CSiO:H) plasma nanocoatings of different mechanical and tribological properties were deposited on planar silicon dioxide substrates that closely mimic E-glass. The nanoscratch test was used to characterize the nanocoating adhesion expressed in terms of critical normal load and work of adhesion. Next, the same nanocoatings were deposited on E-glass fibres, which were used as reinforcements in the polyester composite to affect its interphase properties. The shear properties of the polymer composite were characterized by macro- and micromechanical tests, namely a short beam shear test to determine the short-beam strength and a single fibre push-out test to determine the interfacial shear strength. The results of the polymer composites showed a strong correlation between the short-beam strength and the interfacial shear strength, proving that both tests are sensitive to changes in fibre-matrix adhesion due to different surface modification of glass fibres (GF). Finally, a strong correlation between the shear properties of the GF/polyester composite and the adhesion of the plasma nanocoating expressed through the work of adhesion was demonstrated. Thus, increasing the work of adhesion of plasma nanocoatings from 0.8 to 1.5 mJ·m-2 increased the short-beam strength from 23.1 to 45.2 MPa. The results confirmed that the work of adhesion is a more suitable parameter to characterise the level of nanocoating adhesion in comparison with the critical normal load.
Klíčová slova
Plasma nanocoatings; glass fibre; polymer composite; short-beam strength; interfacial shear strength; work of adhesion; mechanical properties
Autoři
PLICHTA, T.; ŠIRJOVOVÁ, V.; ZVONEK, M.; KALINKA, G.; ČECH, V.
Vydáno
16. 2. 2021
Nakladatel
MDPI
ISSN
2073-4360
Periodikum
Polymers
Ročník
13
Číslo
4
Stát
Švýcarská konfederace
Strany od
1
Strany do
15
Strany počet
URL
https://www.mdpi.com/2073-4360/11/7/1188
Plný text v Digitální knihovně
http://hdl.handle.net/11012/196365
BibTex
@article{BUT170087, author="Tomáš {Plichta} and Veronika {Širjovová} and Milan {Zvonek} and Gerhard {Kalinka} and Vladimír {Čech}", title="The adhesion of plasma nanocoatings controls the shear properties of GF/polyester composite", journal="Polymers", year="2021", volume="13", number="4", pages="1--15", doi="10.3390/polym13040593", issn="2073-4360", url="https://www.mdpi.com/2073-4360/11/7/1188" }