Detail publikace

Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine

OTIPKA, V. PROKOP, A. ŘEHÁK, K. ZAJAC, R.

Originální název

Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Injection systems of modern commercial vehicle power units are still a frequent topic for development engineers in terms of durability and reliability. Therefore, the content of this study is just an investigation of the dynamic behaviour of high-pressure injection pipes of a four-cylinder combustion engine. The modal properties of the injection tubes are evaluated by experimental modal analysis (EMA). Another phase of the measurements is the sensing and analysing of the acceleration on each injection pipe during the engine speed ramp in the entire range of the speed spectrum. There was investigated the modal behaviour of the structure to the operational character of the excitation. The work includes a numerical model established by finite element method (FEM), where the boundary conditions correspond to the real installation of injection pipes from the measurement. The modal properties of injection pipes were primarily investigated through the numerical approach, several variants of pipe attachments were considered in simulations. Comparing the FEM results of different pipe attachments, the suitability of the clamp position with respect to the specific installation in the power unit from the measurement is discussed. From the evaluated results, it is possible to assume the dynamic behaviour of the high-pressure injection pipe in the power unit. Based on the performed analyses, the critical mode shapes of the injection pipes are described considering the engine operating condition. When the engine speed frequency and some pipe eigen frequency interfere together, it is undesirable state. In many cases, this leads to a crack initiation and subsequent damage of the injection pipes during the cyclic load. The presented results and conclusions in this study should improve the overall knowledge on high-pressure fuel pipes in terms of modal properties and its vibration behaviour during operating condition.

Klíčová slova

high-pressure pipes, eigen frequencies, measurement, FEM

Autoři

OTIPKA, V.; PROKOP, A.; ŘEHÁK, K.; ZAJAC, R.

Vydáno

19. 3. 2021

Nakladatel

JVE International

ISSN

2335-2124

Periodikum

Journal of Measurements in Engineering

Ročník

9

Číslo

1

Stát

Litevská republika

Strany od

48

Strany do

57

Strany počet

10

URL

https://www.jvejournals.com/article/21823

Plný text v Digitální knihovně

http://hdl.handle.net/11012/203008

BibTex

@article{BUT174981,
  author="Václav {Otipka} and Roman {Zajac} and Aleš {Prokop} and Kamil {Řehák}",
  title="Modal properties diagnostics of the high-pressure fuel injection pipes in off-road diesel engine",
  journal="Journal of Measurements in Engineering",
  year="2021",
  volume="9",
  number="1",
  pages="48--57",
  doi="10.21595/jme.2021.21823",
  issn="2335-2124",
  url="https://www.jvejournals.com/article/21823"
}