Detail publikace

Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent

Popovic, M. Velickovic, Z.S. Bogdanov, J. Marinkovic, A.D. Luna, M.C. Trajkovic, I. Obradovic, N. Pavlovic, V.

Originální název

Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were studied. Magnetite (MG) modified 3D printed wollastonite was obtained by two step procedure: modification of 3D_W with 3-aminoproylsilane (APTES) followed by controlled magnetite (MG) deposition to obtain 3D_W/M adsorbent. The structure/properties of 3D_W/M were confirmed by applying FTIR, XRD, TGD/DTA, and SEM analysis. The adsorption properties of hybrid adsorbents were carried out for As(V) and Cr(VI) removal - one relative to the initial pH value, the adsorbent mass, the temperature, and the adsorption time. Time-dependent adsorption study was best described by pseudo-second order equation, while Weber Morris analysis showed that intraparticle diffusion controled diffusional transport. Similar activation energy, 17.44 and 14.49 kJ.mol(-1) for adsorption As(V) and Cr(VI) on 3D_W/M, respectively, indicated main contribution of physical adsorption. Determination of adsorption parameters was performed by applying different adsorption isotherm models, and the best fit was obtained using Freundlich model. The adsorption capacity of 24.16 and 29.6 mg g(-1) for As(V) and Cr(VI) at 2 degrees C, Co = 5.5 and 5.3 mg L-l, respectively, were obtained. Thermodynamic study indicated favourable process at a higher temperature. Preliminary fixed-bed column study and results fitting with Bohart-Adams, Yoon-Nelson, Thomas, and Modified dose-response model showed good agreement with results from the batch study.

Klíčová slova

Arsenic; Chromium; Adsorption; Magnetite; 3D-printed wollastonite

Autoři

Popovic, M.; Velickovic, Z.S.; Bogdanov, J.; Marinkovic, A.D.; Luna, M.C.; Trajkovic, I.; Obradovic, N.; Pavlovic, V.

Vydáno

17. 4. 2022

Nakladatel

INT INST SCIENCE SINTERING (I I S S)

Místo

BELGRADE

ISSN

0350-820X

Periodikum

Science of Sintering

Ročník

54

Číslo

1

Stát

Srbská republika

Strany od

105

Strany do

124

Strany počet

20

URL

http://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X2201105P#.Yt_peHZBw2w

BibTex

@article{BUT178667,
  author="Popovic, M. and Velickovic, Z.S. and Bogdanov, J. and Marinkovic, A.D. and Luna, M.C. and Trajkovic, I. and Obradovic, N. and Pavlovic, V.",
  title="Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent",
  journal="Science of Sintering",
  year="2022",
  volume="54",
  number="1",
  pages="105--124",
  doi="10.2298/SOS2201105P",
  issn="0350-820X",
  url="http://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X2201105P#.Yt_peHZBw2w"
}