Detail publikace

Mathematical models for machining optimization of Ampcoloy 35 with different thicknesses using WEDM to improve the surface properties of mould parts

MOURALOVÁ, K. BEDNÁŘ, J. BENEŠ, L. PROKEŠ, T. ZAHRADNÍČEK, R. FRIES, J.

Originální název

Mathematical models for machining optimization of Ampcoloy 35 with different thicknesses using WEDM to improve the surface properties of mould parts

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Wire electrical discharge machining (WEDM) is an unconventional machining technology that can be used to machine materials with a minimum electrical conductivity. The technology is often employed in the automotive industry, as it makes it possible to produce mould parts of complex shapes. Copper alloys are commonly used as a electrodes for their high thermal conductivity. The subject of this study was creating mathematical models for machining optimization of Ampcoloy 35 with different thicknesses (ranging from 5 to 160 mm with a step of 5 mm) using WEDM to improve the surface properties of mould parts.The Box-Behnken type experiment was used with a total of 448 samples produced. The following machining parameters were altered over the course of the experiment: Pulse on and off time, Discharge current, and material thickness. The cutting speed was measured and the topography of the machined surfaces in the centre and at the margins of the samples, were analysed. The morphology and subsurface layer were also studied. What makes this study unique is the large number of the tested thicknesses, ranging from 5 to 160 mm with a step of 5 mm. The contribution of this study to the automotive industry and plastic injection mould production is therefore significant. The regression models for cutting speed and surface topography allow for efficient defect-free machining of Ampcoloy 35 of 5-160 mm thicknesses, both in the surface and subsurface layer.

Klíčová slova

WEDM; surface topography; cutting speed; Ampcoloy; design of experiment; machining parameters

Autoři

MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; FRIES, J.

Vydáno

14. 1. 2023

Nakladatel

MDPI

Místo

Švýcarsko

ISSN

1996-1944

Periodikum

Materials

Ročník

16

Číslo

1

Stát

Švýcarská konfederace

Strany od

1

Strany do

18

Strany počet

18

URL

https://www.mdpi.com/1996-1944/16/1/100

Plný text v Digitální knihovně

http://hdl.handle.net/11012/209160

BibTex

@article{BUT180451,
  author="Kateřina {Mouralová} and Josef {Bednář} and Libor {Beneš} and Tomáš {Prokeš} and Radim {Zahradníček} and Jiří {Fries}",
  title="Mathematical models for machining optimization of Ampcoloy 35 with different thicknesses using WEDM to improve the surface properties of mould parts
",
  journal="Materials",
  year="2023",
  volume="16",
  number="1",
  pages="18",
  doi="10.3390/ma16010100
",
  issn="1996-1944",
  url="https://www.mdpi.com/1996-1944/16/1/100
"
}