Detail publikace

Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating

VRAŽINA, T. ŠULÁK, I. POLOPRUDSKÝ, J. ZÁBRANSKÝ, K. GEJDOŠ, P. HADRABA, H. ČELKO, L.

Originální název

Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

IThis paper investigates the influence of thermal spray parameters of the high-velocity oxygen fuel (HVOF) process on the properties of cermet coatings prepared from commercially available Amperit 551 WC-CrC-Ni powder. Three different processing parameters were applied to optimize the production process with the aim to achieve preeminent mechanical properties and fully dense material without microstructural defects. The deposition was carried out by a GLC5 gun. The velocity and temperature of powder particles in the spray stream were monitored by Accuraspray Tecnar diagnostic tool. The quality of deposited coatings was analyzed by means of light microscopy, scanning electron microscopy, and X-ray diffraction. The chemical composition of the used powder and sprayed WC-CrC-Ni coating was determined by energy dispersive spectroscopy. It was found that the spray parameters have a negligible effect on the resulting microstructure and phase composition of the coating. However, the porosity and surface roughness were significantly affected by the variation in process parameters. To assess the basic mechanical properties of HVOF sprayed coating instrumented Vickers hardness measurements were utilized. The coating hardness reached mean values over 1400 HV 0.1 and the indentation modulus varied from 152-279 GPa.

Klíčová slova

HVOF; microhardness; WC-CrC-Ni

Autoři

VRAŽINA, T.; ŠULÁK, I.; POLOPRUDSKÝ, J.; ZÁBRANSKÝ, K.; GEJDOŠ, P.; HADRABA, H.; ČELKO, L.

Vydáno

18. 5. 2022

Nakladatel

Tanger Ltd.

ISBN

978-80-88365-06-8

Kniha

Proceedings 31st International Conference on Metallurgy and Materials

ISSN

2694-9296

Periodikum

28th International Conference on Metallurgy and Materials

Stát

Česká republika

Strany od

487

Strany do

492

Strany počet

6

URL

https://doi.org/10.37904/metal.2022.4421

BibTex

@inproceedings{BUT180595,
  author="VRAŽINA, T. and ŠULÁK, I. and POLOPRUDSKÝ, J. and ZÁBRANSKÝ, K. and GEJDOŠ, P. and HADRABA, H. and ČELKO, L.",
  title="Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating",
  booktitle="Proceedings 31st International Conference on Metallurgy and Materials",
  year="2022",
  journal="28th International Conference on Metallurgy and Materials",
  pages="487--492",
  publisher="Tanger Ltd.",
  doi="10.37904/metal.2022.4421",
  isbn="978-80-88365-06-8",
  issn="2694-9296",
  url="https://doi.org/10.37904/metal.2022.4421"
}