Detail publikace

3D scanning as an effective tool for controlling the dimensions of test specimens

VYHLÍDAL, M.

Originální název

3D scanning as an effective tool for controlling the dimensions of test specimens

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

3D laser scanning is a powerfull tool that digitally captures the shape of physical objects using a laser light crosses. In this work, the 3D laser scanning technology is used for the 3D shape capture of specially designed specimens. These specimens previously made of fine-grained cement-based composite of the nominal dimensions 40 × 40 × 160 mm with inclusion in the shape of prisms with nominal dimensions of 8 × 8 × 40 mm were provided with an initial central edge notch and tested in the three-point bending configuration. The aim of this paper is to study the macrostructure of fracture surfaces via 3D scanning technology, measure the area of ligament, verify the designed notch depth and evaluate the fracture toughness and specific fracture energy based on the measured dimensions. The results indicate that the measured notch depth is lower than the designed one thus the differences between fracture toughness calculated for designed notch depth and for the measured one is approximately 10 %. In addition, the fracture toughness is overestimated when considering the design values.

Klíčová slova

3D scanning, fracture test, fracture toughness, specific fracture energy.

Autoři

VYHLÍDAL, M.

Vydáno

9. 1. 2023

Nakladatel

VSB – Technical University of Ostrava, Faculty of Civil Engineering

Místo

Ostrava

ISSN

1804-4824

Periodikum

Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series

Ročník

22

Číslo

2

Stát

Česká republika

Strany od

45

Strany do

50

Strany počet

7

URL

http://tces.vsb.cz/Home/ArticleDetail/844

Plný text v Digitální knihovně

http://hdl.handle.net/11012/213700

BibTex

@article{BUT180687,
  author="Michal {Vyhlídal}",
  title="3D scanning as an effective tool for controlling the dimensions of test specimens",
  journal="Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series",
  year="2023",
  volume="22",
  number="2",
  pages="45--50",
  doi="10.35181/tces-2022-0014",
  issn="1804-4824",
  url="http://tces.vsb.cz/Home/ArticleDetail/844"
}