Detail publikace

The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y(2)O(3) ODS Nanocomposite

SVOBODA, J. GAMANOV, Š. BÁRTKOVÁ, D. LUPTÁKOVÁ, N. BOŘIL, P. JARÝ, M. HOLZER, J. MAŠEK, B.

Originální název

The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y(2)O(3) ODS Nanocomposite

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Mechanical alloying (MA) of powders represents the first processing step in the production of oxide dispersion-strengthened (ODS) alloys. MA is a time and energy-consuming process also in the production of Fe-10Al-4Cr-4Y(2)O(3) creep and oxidation-resistant ODS nanocomposite, denoted as the FeAlOY, and it deserves to be optimized. MA is performed at two different temperatures at different times. The powder after MA, as well as the microstructure and high-temperature strength of the final FeAlOY, are characterized and the optimal MA conditions are evaluated. The obtained results show that the size distribution of the powder particles, as well as the dissolution and homogenization of the Y2O3, becomes saturated quite soon, while the homogenization of the metallic components, such as Al and Cr, takes significantly more time. The high-temperature tensile tests and grain microstructures of the secondary recrystallized FeAlOY, however, indicate that the homogenization of the metallic components during MA does not influence the quality of the FeAlOY, as the matrix of the FeAlOY is sufficiently homogenized during recrystallization. Thus, the conditions of MA correspond to sufficient dissolution and homogenization of Y2O3 and can be considered the optimal ones.

Klíčová slova

oxide dispersion strengthened (ODS) alloy; mechanical alloying (MA); powder hot consolidation by rolling; strength at 1100 degrees C; nanocomposite

Autoři

SVOBODA, J.; GAMANOV, Š.; BÁRTKOVÁ, D.; LUPTÁKOVÁ, N.; BOŘIL, P.; JARÝ, M.; HOLZER, J.; MAŠEK, B.

Vydáno

17. 12. 2022

Nakladatel

MDPI

Místo

BASEL

ISSN

1996-1944

Periodikum

Materials

Ročník

15

Číslo

24

Stát

Švýcarská konfederace

Strany počet

14

URL

https://www.mdpi.com/1996-1944/15/24/9034

BibTex

@article{BUT182447,
  author="Jiří {Svoboda} and Štěpán {Gamanov} and Denisa {Bártková} and Natália {Luptáková} and Petr {Bořil} and Milan {Jarý} and Jakub {Holzer} and Bohuslav {Mašek}",
  title="The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y(2)O(3) ODS Nanocomposite",
  journal="Materials",
  year="2022",
  volume="15",
  number="24",
  pages="14",
  doi="10.3390/ma15249034",
  issn="1996-1944",
  url="https://www.mdpi.com/1996-1944/15/24/9034"
}