Detail publikace

Influence of the interfacial transition zone between a steel inclusion and cement-based composite on the fracture response of a bent specimen

VYHLÍDAL, M. KLUSÁK, J. KUCHARCZYKOVÁ, B. DANĚK, P. ŠIMONOVÁ, H. KERŠNER, Z.

Originální název

Influence of the interfacial transition zone between a steel inclusion and cement-based composite on the fracture response of a bent specimen

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The influence of the interfacial transition zone (ITZ) between a steel inclusion and fine-grained cement-based composite on fracture behaviour of the specimen with the inclusion is investigated. Three-point bending fracture tests were conducted and the mechanical fracture properties of the composite were evaluated based on the results of the tests. The numerical analysis of the fracture test was performed and related to the experimental data obtained during crack propagation, and the microstructure of fracture surfaces. The crack propagation conditions were assessed based on the criterion of the average value of tangential stress calculated over certain distance in dependence on the polar angle (GMTS criterion). We concluded that the fracture toughness of the interface KIc, ITZ is equal to 33 % of the fracture toughness of matrix KIc, MTX. The poor fracture properties of ITZ are responsible for the reduction of load-bearing capacity of whole specimen with inclusion in comparison to the sample without the inclusion.

Klíčová slova

Steel inclusionFracture testNumerical simulationCrack propagation pathThe criterion of average tangential stress

Autoři

VYHLÍDAL, M.; KLUSÁK, J.; KUCHARCZYKOVÁ, B.; DANĚK, P.; ŠIMONOVÁ, H.; KERŠNER, Z.

Vydáno

11. 5. 2023

Nakladatel

Elsevier

ISSN

0013-7944

Periodikum

Engineering Fracture Mechanics

Ročník

286

Číslo

05

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

18

Strany počet

18

URL

BibTex

@article{BUT183464,
  author="Michal {Vyhlídal} and Jan {Klusák} and Barbara {Kucharczyková} and Petr {Daněk} and Hana {Šimonová} and Zbyněk {Keršner}",
  title="Influence of the interfacial transition zone between a steel inclusion and cement-based composite on the fracture response of a bent specimen",
  journal="Engineering Fracture Mechanics",
  year="2023",
  volume="286",
  number="05",
  pages="1--18",
  doi="10.1016/j.engfracmech.2023.109256",
  issn="0013-7944",
  url="https://doi.org/10.1016/j.engfracmech.2023.109256"
}