Detail publikace

Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel

SEDLÁK, J. ZOUHAR, J. KOLOMÝ, Š. SLANÝ, M. NEČESÁNEK, E.

Originální název

Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Drilling into the solid material is one of the basic technological operations, which creates a cylindrical hole in an appropriate time with required quality. Drilling operation demands a favourable removal of chips from the cutting area because a creation of an undesirable shape of chips can impart a lower quality of the drilled hole corresponding with the generation of excess heat due to the intense contact of the chip with drill. The solution for a proper machining is a suitable modification of the drill geometry i.e., point and clearance angles as presented in current study. The tested drills are made of M35 high-speed steel characterized by a very thin core at the point of the drill. An interesting feature of the drills is the use of cutting speed higher than 30 m min(-1), with the feed of 0.2 mm per revolution. The surface roughness (Ra and Rz lower than 1 mu m and 6 mu m respectively), cylindricity (0.045 mm), roundness (0.025 mm), perpendicularity of the hole axis (0.025 mm), diameters and position of the individual holes were achieved for a drill with point angle 138.32 degrees and clearance angle 6.92 respectively. The increase of the drill point angle by 6 degrees resulted in the decrease in the feed force of more than 150 N. In addition, an increase of the clearance angle by 1 degrees resulted with a decrease in the feed force of 70 N. The results of the experiment showed that with the correct geometry of the tool the effective machining without using internal cooling can be realised.

Klíčová slova

point angle, clearance angle, drilling, screw drill, high-speed steel, stainless steel

Autoři

SEDLÁK, J.; ZOUHAR, J.; KOLOMÝ, Š.; SLANÝ, M.; NEČESÁNEK, E.

Vydáno

7. 6. 2023

Nakladatel

Springer Nature

Místo

England

ISSN

2045-2322

Periodikum

Scientific Reports

Ročník

13

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

13

Strany počet

13

URL

https://www.nature.com/articles/s41598-023-36448-y

Plný text v Digitální knihovně

http://hdl.handle.net/11012/244972

BibTex

@article{BUT184246,
  author="Josef {Sedlák} and Jan {Zouhar} and Štěpán {Kolomý} and Martin {Slaný} and Emil {Nečesánek}",
  title="Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel",
  journal="Scientific Reports",
  year="2023",
  volume="13",
  number="1",
  pages="1--13",
  doi="10.1038/s41598-023-36448-y",
  issn="2045-2322",
  url="https://www.nature.com/articles/s41598-023-36448-y"
}