Detail publikace

Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method

TKACHENKO, S. BEDNAŘÍKOVÁ, V. KSENZOVA, O. REMEŠOVÁ, M. SLÁMEČKA, K. CIHLÁŘ, J. BALÁŽ, M. DEÁK, A. ČELKO, L.

Originální název

Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

In the present contribution, we used the spray drying method for the preparation of molybdenum-based composite powders, which belong to an important class of high-temperature structural materials - oxide dispersion strengthened molybdenum alloys (ODS-Mo). Three types of materials were prepared via spray drying and subsequent steps of calcination and reduction, including undoped reference Mo, ODS-Mo doped with 1 wt% of La2O3, and ODS-Mo doped with 1 wt% of La2O3 and 1 wt% of ZrO2. The particular focus was given to precursor solution; specifically, the effects of type (aqueous or water-ethanol mixture) and chemical composition (the addition of La and Zr precursors) were studied in detail, which was rarely given attention in previous research. The morphological and microstructural changes of the particles during oxidation and reduction of sprayed-dried powders were extensively analysed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The morphology and crystallinity of spray dried powders were controlled by the state of spraying precursor solution, i.e. homogeneous solution or particle suspension. Calcination at the temperatures of 500 degrees C and 650 degrees C produced spherical polycrystalline and slab-shaped monocrystalline MoO3 oxide particles. Subsequent reductive treatment of transformed calcined powders into metal-based powders took place with efficiency that depended mainly on the type of spraying solution (aqueous solution or water-ethanol suspension) and its chemical composition, in which case, the addition of La and Zr precursors resulted in lower efficiency than the addition of La alone. In terms of powder particle size, homogeneity of alloying elements, and reduction efficiency, the powders produced from water-ethanol suspensions were clearly superior to those produced from aqueous solutions.

Klíčová slova

Molybdenum; Lanthanum; ODS alloy; Spray drying; Oxide; Reduction

Autoři

TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; KSENZOVA, O.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CIHLÁŘ, J.; BALÁŽ, M.; DEÁK, A.; ČELKO, L.

Vydáno

15. 11. 2023

Nakladatel

ELSEVIER SCIENCE SA

Místo

LAUSANNE

ISSN

0925-8388

Periodikum

Journal of Alloys and Compounds

Ročník

964

Číslo

11.6.2023

Stát

Švýcarská konfederace

Strany počet

13

URL

https://www.sciencedirect.com/science/article/pii/S0925838823026105?via%3Dihub

BibTex

@article{BUT184483,
  author="Serhii {Tkachenko} and Vendula {Bednaříková} and Olha {Ksenzova} and Michaela {Remešová} and Karel {Slámečka} and Jaroslav {Cihlář} and Matej {Baláž} and Andréa {Deák} and Ladislav {Čelko}",
  title="Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method",
  journal="Journal of Alloys and Compounds",
  year="2023",
  volume="964",
  number="11.6.2023",
  pages="13",
  doi="10.1016/j.jallcom.2023.171307",
  issn="0925-8388",
  url="https://www.sciencedirect.com/science/article/pii/S0925838823026105?via%3Dihub"
}