Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
MICHALEC, M. FOLTÝN, J. DRYML, T. SNOPEK, L. JAVORSKÝ, D. ČUPR, M. SVOBODA, P.
Originální název
Assembly Error Tolerance Estimation for Large-Scale Hydrostatic Bearing Segmented Sliders under Static and Low-Speed Conditions
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
angličtina
Originální abstrakt
Hydrostatic bearings come with certain advantages over rolling bearings in moving large-scale structures. However, assembly errors are a serious matter on large scales. This study focuses on finding assembly error tolerances for the most common types in segmented errors of hydrostatic bearing sliders: tilt and offset. The experimental part was performed in the laboratory on a full diagnostic hydrostatic bearing testing rig. An investigation of the type of error on bearing performance was first conducted under static conditions. We identified the limiting error-to-film thickness ratio (e/h) for static offset error as 2.5 and the tilt angle as θ = 0.46° for the investigated case. Subsequently, two types of offset error were investigated under slow-speed conditions at 38 mm/s. The limiting error for the offset error considering the relative bi-directional movement of the slider and the pad was determined as e/h < 1. The results further indicate that the error tolerance would further decrease with increasing speed. The experimental results of error tolerances can be used to determine the required film thickness or vice versa.
Klíčová slova
tolerancing; error estimation; experimental investigation; hydrostatic lubrication; hydrostatic guideway
Autoři
MICHALEC, M.; FOLTÝN, J.; DRYML, T.; SNOPEK, L.; JAVORSKÝ, D.; ČUPR, M.; SVOBODA, P.
Vydáno
15. 11. 2023
Nakladatel
MDPI
Místo
Switzerland
ISSN
2075-1702
Periodikum
Machines
Ročník
11
Číslo
Stát
Švýcarská konfederace
Strany počet
14
URL
https://www.mdpi.com/2075-1702/11/11/1025
Plný text v Digitální knihovně
http://hdl.handle.net/11012/245128
BibTex
@article{BUT185335, author="Michal {Michalec} and Jan {Foltýn} and Tomáš {Dryml} and Lukáš {Snopek} and Dominik {Javorský} and Martin {Čupr} and Petr {Svoboda}", title="Assembly Error Tolerance Estimation for Large-Scale Hydrostatic Bearing Segmented Sliders under Static and Low-Speed Conditions", journal="Machines", year="2023", volume="11", number="11", pages="14", doi="10.3390/machines11111025", issn="2075-1702", url="https://www.mdpi.com/2075-1702/11/11/1025" }