Detail publikace

ON THE EFFECT OF ADVANCED PVD COATING ON PERFORMANCE OF CUTTING DIES IN AUSTENITIC STEEL

PÍŠKA, M. HOLKOVÁ, K.

Originální název

ON THE EFFECT OF ADVANCED PVD COATING ON PERFORMANCE OF CUTTING DIES IN AUSTENITIC STEEL

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Effective machining of austenitic steels has been a long-term challenge due to the unique combination of mechanical properties, strain hardening, poor heat conductivity, and tendency to build up-edge formation of the steel when cutting. The round HSS cutting dies M10x1,5-6g, uncoated and PVD-coated with sputtering technology - TINALOX® GOLD, ALOX SN2, and HIPIMs technology - FerroCon®, FerroCon ®+Ti,Al(C,N), three samples per each variant, produced in the company CemeCon Ivancice, Czech Republic. All PVD-coated cutting dies showed a very good cutting performance compared to the uncoated HSS dies, prolonging the tool lives 4-9 times overall. The longest effective time of chip formation for TINALOX® GOLD was 43-45 minutes. The higher recorded temperatures of chips (107-111°C) resulted in better formability of the material, compared to 104-105°C for uncoated HSS tools. The PVD coatings worked like ceramic insulators, preventing intensive heat flux into the tool, and enhancing so the plastic deformation of the austenitic steel. The best results for the round HSS cutting die were achieved repeatedly with the sputtering technology - TINALOX® GOLD, which provided excellent tribology between the tool, chip, and workpiece and high-quality threads.

Klíčová slova

threading; coating; chip; loading; quality

Autoři

PÍŠKA, M.; HOLKOVÁ, K.

Vydáno

18. 12. 2023

Nakladatel

DAAAM

Místo

Vienna

ISBN

978-3-902734-20-4

Kniha

Proceedings of the 34th DAAAM International Symposium

Edice

1

Číslo edice

1

Strany od

16

Strany do

25

Strany počet

10

URL

https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2023/003.pdf

BibTex

@inproceedings{BUT185789,
  author="Miroslav {Píška} and Kristýna {Holková}",
  title="ON THE EFFECT OF ADVANCED PVD COATING ON PERFORMANCE OF CUTTING DIES IN AUSTENITIC STEEL",
  booktitle="Proceedings of the 34th DAAAM International Symposium",
  year="2023",
  series="1",
  number="1",
  pages="16--25",
  publisher="DAAAM",
  address="Vienna",
  doi="10.2507/34th.daaam.proceedings.003",
  isbn="978-3-902734-20-4",
  url="https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2023/003.pdf"
}