Detail publikace

Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43

JAROŠ, J. VAVERKA, O. SENCK, S. KOUTNÝ, D.

Originální název

Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The low specific density and good strength-to-weight ratio make magnesium alloys a promising material for lightweight applications. The combination of the properties of magnesium alloys and Additive Manufacturing by the Laser Powder Bed Fusion (LPBF) process enables the production of complex geometries such as lattice or bionic structures. Magnesium structures are intended to drastically reduce the weight of components and enable a reduction in fuel consumption, particularly in the aerospace and automotive industries. However, the LPBF processing of magnesium structures is a challenge. In order to produce high-quality structures, the process parameters must be developed in such a way that imperfections such as porosity, high surface roughness and dimensional inaccuracy are suppressed. In this study, the contour scanning strategy is used to produce vertical and inclined struts with diameters ranging from 0.5 to 3 mm. The combination of process parameters such as laser power, laser speed and overlap depend on the inclination and diameter of the strut. The process parameters with an area energy of 1.15-1.46 J/mm2 for struts with a diameter of 0.5 mm and an area energy of 1.62-3.69 J/mm2 for diameters of 1, 2 and 3 mm achieve a relative material density of 99.2 to 99.6%, measured on the metallographic sections. The results are verified by CT analyses of BCCZ cells, which achieve a relative material density of over 99.3%. The influence of the process parameters on the quality of struts is described and discussed.

Klíčová slova

laser powder bed fusion; magnesium alloy WE43; scanning strategy; lattice structure; relative density

Autoři

JAROŠ, J.; VAVERKA, O.; SENCK, S.; KOUTNÝ, D.

Vydáno

15. 2. 2024

Nakladatel

MDPI

Místo

BASEL

ISSN

2072-666X

Periodikum

Micromachines

Ročník

15

Číslo

2

Stát

Švýcarská konfederace

Strany od

1

Strany do

16

Strany počet

16

URL

https://www.mdpi.com/2072-666X/15/2/278

Plný text v Digitální knihovně

http://hdl.handle.net/11012/245289

BibTex

@article{BUT188265,
  author="Jan {Jaroš} and Ondřej {Vaverka} and Sascha {Senck} and Daniel {Koutný}",
  title="Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43",
  journal="Micromachines",
  year="2024",
  volume="15",
  number="2",
  pages="16",
  doi="10.3390/mi15020278",
  issn="2072-666X",
  url="https://www.mdpi.com/2072-666X/15/2/278"
}