Detail publikace

Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection

SKOWRONKOVÁ, N. ADÁMEK, M. ZVONKOVÁ, M. MATYÁŠ, J. ADÁMKOVÁ, A. DLABAJA, S. BÚRAN, M. ŠEVČÍKOVÁ, V. MLČEK, J. VOLEK, Z. CERNEKOVA, M.

Originální název

Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

This paper explores an application of 3D printing technology on the food industry. Since its inception in the 1980s, 3D printing has experienced a huge rise in popularity. This study uses cost-effective, flexible, and sustainable components that enable specific features of certain gas chromatography. This study aims to optimize the process of gas detection using a 3D printed separation column and the MiCS-6814 sensor. The principle of the entire device is based on the idea of utilizing a simple capillary chromatographic column manufactured by 3D printing for the separation of samples into components prior to their measurement using inexpensive chemiresistive sensors. An optimization of a system with a 3D printed PLA block containing a capillary, a mixing chamber, and a measuring chamber with a MiCS-6814 sensor was performed. The optimization distributed the sensor output signal in the time domain so that it was possible to distinguish the peak for the two most common alcohols, ethanol and methanol. The paper further describes some optimization types and their possibilities.

Klíčová slova

chemiresistive gas sensors; 3D printing; sustainability; capillary; methanol detection; ethanol detection

Autoři

SKOWRONKOVÁ, N.; ADÁMEK, M.; ZVONKOVÁ, M.; MATYÁŠ, J.; ADÁMKOVÁ, A.; DLABAJA, S.; BÚRAN, M.; ŠEVČÍKOVÁ, V.; MLČEK, J.; VOLEK, Z.; CERNEKOVA, M.

Vydáno

13. 10. 2024

Nakladatel

MDPI

ISSN

1424-8220

Periodikum

SENSORS

Ročník

24

Číslo

20

Stát

Švýcarská konfederace

Strany od

1

Strany do

21

Strany počet

21

URL

https://www.mdpi.com/1424-8220/24/20/6594

Plný text v Digitální knihovně

http://hdl.handle.net/11012/250735

BibTex

@article{BUT189871,
  author="Nela {Skowronková} and Martin {Adámek} and Magdaléna {Zvonková} and Jiří {Matyáš} and Anna {Adámková} and Stepan {Dlabaja} and Martin {Búran} and Veronika {Ševčíková} and Jiří {Mlček} and Zdeněk {Volek} and Martina {Cernekova}",
  title="Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection",
  journal="SENSORS",
  year="2024",
  volume="24",
  number="20",
  pages="1--21",
  doi="10.3390/s24206594",
  issn="1424-8220",
  url="https://www.mdpi.com/1424-8220/24/20/6594"
}