Detail publikace

The Machinability of Different Albromet W130 Plates Thicknesses by WEDM to the Required Surface Roughness Value

MOURALOVÁ, K. BENEŠ, L. ZAHRADNÍČEK, R. FRIES, J, MANOVÁ, A.

Originální název

The Machinability of Different Albromet W130 Plates Thicknesses by WEDM to the Required Surface Roughness Value

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Wire Electrical Discharge Machining (WEDM) technology represents an unconventional but vital manufacturing technology in many different industrial branches. The automotive industry and its many significant requirements bring the need to manufacture inserts and mould segments for plastic injections from Albromet W130 material, with a required roughness, Ra, from 4.5 to 5 mu m so that subsequent profile etching can be eliminated. A planned experiment of 60 rounds was carried out to discover the optimal machining parameters, namely, the pulse-off time, gap voltage, discharge current, pulse-on time, and wire speed in order for the thickness of 10 to 100 mm (after 10 mm) to demonstrate the required roughness. The goal was to evaluate the surface roughness, maximise the cutting speed, and manufacture it without surface or subsurface defects. The evaluation of the planned experiment led to the establishment of optimised WEDM machining parameters with which thicknesses of 10-100 mm will always be produced with the required roughness, Ra, from 4.5 to 5 mu m and with the highest possible cutting speed. It was also proven that the machining does not lead to surface or subsurface defects, and thus, the service life of the manufactured parts will not be affected.

Klíčová slova

WEDM; wire electrical discharge machining; thicknesses; Albromet W130; design of experiment; surface roughness

Autoři

MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; FRIES, J, MANOVÁ, A.

Vydáno

6. 12. 2024

Nakladatel

MDPI

Místo

BASEL

ISSN

1996-1944

Periodikum

Materials

Ročník

17

Číslo

22

Stát

Švýcarská konfederace

Strany počet

19

URL

https://pmc.ncbi.nlm.nih.gov/articles/PMC11595453/

BibTex

@article{BUT193525,
  author="Kateřina {Mouralová} and Libor {Beneš} and Radim {Zahradníček} and Jiří {Fries}",
  title="The Machinability of Different Albromet W130 Plates Thicknesses by WEDM to the Required Surface Roughness Value",
  journal="Materials",
  year="2024",
  volume="17",
  number="22",
  pages="19",
  doi="10.3390/ma17225520",
  issn="1996-1944",
  url="https://pmc.ncbi.nlm.nih.gov/articles/PMC11595453/"
}