Detail publikace
Quaternary Ammonium and Pyridinium Salts as Modifiers of the Rheological Properties of Geopolymer Pastes
ROVNANÍK, P. ŽIŽLAVSKÝ, T.
Originální název
Quaternary Ammonium and Pyridinium Salts as Modifiers of the Rheological Properties of Geopolymer Pastes
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
angličtina
Originální abstrakt
The study investigates the impact of quaternary ammonium and pyridinium salts on the rheological properties of metakaolin-based geopolymer pastes, with a focus on their application in 3D printing technology The experimental results demonstrated that the addition of these salts increased both the plastic viscosity and yield stress of the geopolymer mixtures, with the effect intensifying with higher concentrations and longer aliphatic chains. The coefficient of consistency derived from Herschel-Bulkley model increased from 1.78 up to 3.83 Pa·sn and the yield stress rose from 3.4 up to 31.8 Pa. The study also observed a shift from shear-thickening to shear-thinning behaviour and reduction in thixotropic properties with increased dosages of the admixtures, which is beneficial for 3D printing. The mechanical properties of modified geopolymer mortars were also tested and the results revealed quite negligible effect of admixtures on flexural strength. The compressive strength was slightly reduced by up to 12%. The findings suggest that these admixtures are effective in modifying the rheological properties of geopolymers, making them more suitable for advanced applications like 3D printing.
Klíčová slova
Geopolymer; Metakaolin; Admixture; Quaternary Ammonium; Pyridinium; Rheology
Autoři
ROVNANÍK, P.; ŽIŽLAVSKÝ, T.
Vydáno
15. 1. 2025
Nakladatel
Trans Tech Publication
Místo
Švýcarsko
ISSN
1662-8969
Periodikum
Advances in Science and Technology
Ročník
159
Stát
Švýcarská konfederace
Strany od
3
Strany do
11
Strany počet
9
URL
BibTex
@inproceedings{BUT194150,
author="Pavel {Rovnaník} and Tomáš {Žižlavský}",
title="Quaternary Ammonium and Pyridinium Salts as Modifiers of the Rheological Properties of Geopolymer Pastes",
booktitle="10th Int. Conf. on Architecture, Materials and Construction (ICAMC) & 5th Int. Conf. on Building Science, Technology and Sustainability (ICBSTS)",
year="2025",
journal="Advances in Science and Technology",
volume="159",
pages="3--11",
publisher="Trans Tech Publication",
address="Švýcarsko",
doi="10.4028/p-9ynO8C",
issn="1662-8969",
url="https://www.scientific.net/AST.159.3"
}