Detail publikace

Combined jet and exhaust flow interacting with an obstacle

KREJČÍ, V. KOŠNER, J.

Originální název

Combined jet and exhaust flow interacting with an obstacle

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The article deals with a combined jet and exhaust flow as generated by an Aaberg exhaust hood and its interaction with the obstacle. The obstacle was a disc aligned with the jet flow and located coaxially to the jet. The diameter of the disc was 550 mm. The air terminal dimensions were: supply slot diameter 200 mm and supply slot width 4 mm. Two operation modes were tested. First, jet only flow at 10 m/s of the exit jet velocity. Second, combined flow mode at which the exhaust velocity was set to 9.13 m/s, keeping the jet exit velocity fixed. The hood operational parameter I was thus 0.6. The obstacle surface roughness was varied by means of sand paper to map the hysteretic jet behaviour when moving the obstacle towards or away from the air terminal.

Klíčová slova

Aaberg hood, radial jet - wall interaction, hysteresis, wall roughness

Autoři

KREJČÍ, V.; KOŠNER, J.

Rok RIV

2010

Vydáno

24. 11. 2010

Nakladatel

Technical University of Liberec

Místo

Liberec

ISBN

978-80-7372-670-6

Kniha

Proceedings of the international conference Experimental Fluid Dynamics 2010

Edice

1

Číslo edice

1

Strany od

301

Strany do

309

Strany počet

8

BibTex

@inproceedings{BUT35103,
  author="Vladimír {Krejčí} and Jan {Košner}",
  title="Combined jet and exhaust flow interacting with an obstacle",
  booktitle="Proceedings of the international conference Experimental Fluid Dynamics 2010",
  year="2010",
  series="1",
  number="1",
  pages="301--309",
  publisher="Technical University of Liberec",
  address="Liberec",
  isbn="978-80-7372-670-6"
}