Detail publikace

Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts

KŘUPKA, I. HARTL, M. SVOBODA, P.

Originální název

Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

This paper focuses on the effects of surface topography modifications on lubrication film thickness within non-conformal lubricated contact. Optical test rig is used to study the lubricant film behavior between the flat surface of a chromium coated glass disc and a steel ball. An array of micro-dents was produced on the ball surface to be able to demonstrate the effect of surface topography on lubrication film formation. Experiments were carried out under elastohydrodynamic and mixed lubrication using steady state and transient operational conditions (start up and reversal motion). Obtained results have shown that surface texturing could represent the way how to increase lubrication efficiency of rolling/sliding non-conformal contacts under operational conditions when lubrication film is not able separate rubbing surfaces. Lubricant emitted from the micro-dent helps to reduce the asperities interaction. Moreover, the effect of surface micro-cavities has been observed within starved non-conformal contact under pure rolling conditions. An increase in film thickness within severe starved contact was localized upstream micro-dents that was recently predicted numerically. This effect was further amplified as lubricant released from micro-dent remains on the ball surface and again enters the contact after the ball turns round.

Klíčová slova

Surface texturing; Elastohydrodynamic lubrication; Mixed lubrication; Start-up; Starvation; Reversal motion; Film thickness

Autoři

KŘUPKA, I.; HARTL, M.; SVOBODA, P.

Rok RIV

2009

Vydáno

1. 5. 2009

Nakladatel

Professional Engineering Publishing

Místo

Londýn

ISSN

1350-6501

Periodikum

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Ročník

223

Číslo

6

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

9

Strany počet

9

BibTex

@article{BUT47936,
  author="Ivan {Křupka} and Martin {Hartl} and Petr {Svoboda}",
  title="Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts",
  journal="PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY",
  year="2009",
  volume="223",
  number="6",
  pages="1--9",
  issn="1350-6501"
}