Detail publikace

OPTIMIZATION OF SECONDARY COOLING IN ORDER TO ACHIEVE HIGHER SURFACE TEMPERATURES AT THE SLAB UNBENDING POINT

ŠTĚTINA, J. KAVIČKA, F. MAUDER, T. KLIMEŠ, L. MASARIK, M. ŠAŇA, Z.

Originální název

OPTIMIZATION OF SECONDARY COOLING IN ORDER TO ACHIEVE HIGHER SURFACE TEMPERATURES AT THE SLAB UNBENDING POINT

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Surface temperatures of cast slabs at small radius segments in front of as well as at the unbending point belong to parameters that affect the surface quality of continuously cast slabs. Older machines for continuous casting were designed with regard to the performance (to amount of cast slabs) rather than to the quality. Therefore, the adaptation of secondary cooling is required in order to accomplish the desired surface temperatures. The modification consists in the dynamic control of secondary cooling, surface temperatures monitoring by means of the numerical model of temperature field as well as in a prospective replacement of cooling nozzles. In order to optimize and control the secondary cooling, characteristics of nozzles and especially the influences of water flow rate, air pressure, casting speed and surface temperatures to the heat transfer coefficient under nozzles have to be known. Moreover, the heat transfer coefficient can be also influenced by the age of nozzles. The paper deals with relationships of described influences and their impacts to the temperature field of cast slabs. The results are presented for the 1530x250 mm slabs that are cast in Evraz Vítkovice Steel where the main authors dynamic 3D solidification model is used to control the production interface and runs in off-line version. Its results can be used as a preparation tool for the real casting process.

Klíčová slova

optimization of temperature field, surface temperature of slab, characteristics of nozzles, continuous casting

Autoři

ŠTĚTINA, J.; KAVIČKA, F.; MAUDER, T.; KLIMEŠ, L.; MASARIK, M.; ŠAŇA, Z.

Rok RIV

2012

Vydáno

23. 5. 2012

Nakladatel

Tanger Ltd., Ostrava

Místo

Ostrava

ISBN

978-80-87294-29-1

Kniha

Sborník příspěvků mezinárodní konference metalurgie a materiálů METAL 2012

Strany od

36

Strany do

41

Strany počet

6

BibTex

@inproceedings{BUT92677,
  author="Josef {Štětina} and František {Kavička} and Tomáš {Mauder} and Lubomír {Klimeš} and Miloš {Masarik} and Zdeněk {Šaňa}",
  title="OPTIMIZATION OF SECONDARY COOLING IN ORDER TO ACHIEVE HIGHER SURFACE TEMPERATURES AT THE SLAB UNBENDING POINT",
  booktitle="Sborník příspěvků mezinárodní konference metalurgie a materiálů METAL 2012",
  year="2012",
  pages="36--41",
  publisher="Tanger Ltd., Ostrava",
  address="Ostrava",
  isbn="978-80-87294-29-1"
}