Detail publikace

Increasing the surface temperature at the slab continuous casting straightening

ŠTĚTINA, J. MAUDER, T. KLIMEŠ, L. MASARIK, M.

Originální název

Increasing the surface temperature at the slab continuous casting straightening

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Surface temperatures of cast slabs at small radius segments in front of as well as at the unbending point belong to parameters that affect the surface quality of continuously cast slabs. Older machines for continuous casting were designed with regard to the performance (to amount of cast slabs) rather than to the quality. Therefore, the adaptation of secondary cooling is required in order to accomplish the desired surface temperatures. The modification consists in the dynamic control of secondary cooling, surface temperatures monitoring by means of the numerical model of temperature field as well as in a prospective replacement of cooling nozzles. In order to optimize and control the secondary cooling, characteristics of nozzles and especially the influences of water flow rate, air pressure, casting speed and surface temperatures to the heat transfer coefficient under nozzles have to be known. Moreover, the heat transfer coefficient can be also influenced by the age of nozzles. The paper deals with relationships of described influences and their impacts to the temperature field of cast slabs. The results are presented for the 1530x250 mm slabs that are cast in Evraz Vítkovice Steel where the main author's dynamic 3D solidification model is used to control the production interface and runs in off-line version. Its results can be used as a preparation tool for the real casting process.

Klíčová slova

continuous casting, steel slabs, thermal analysis, nozzle

Autoři

ŠTĚTINA, J.; MAUDER, T.; KLIMEŠ, L.; MASARIK, M.

Rok RIV

2012

Vydáno

26. 6. 2012

Nakladatel

Vysoké učení technické v Brně

Místo

Brno

ISBN

978-80-214-4529-1

Kniha

Sborník příspěvků 31. mezinárodní konference Setkání kateder mechaniky tekutin a termomechaniky

Číslo edice

1

Strany od

217

Strany do

220

Strany počet

4

BibTex

@inproceedings{BUT92945,
  author="Josef {Štětina} and Tomáš {Mauder} and Lubomír {Klimeš} and Miloš {Masarik}",
  title="Increasing the surface temperature at the slab continuous casting straightening",
  booktitle="Sborník příspěvků 31. mezinárodní konference Setkání kateder mechaniky tekutin a termomechaniky",
  year="2012",
  number="1",
  pages="217--220",
  publisher="Vysoké učení technické v Brně",
  address="Brno",
  isbn="978-80-214-4529-1"
}