Detail publikace

Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings

ČELKO, L. KLAKURKOVÁ, L. SLÁMEČKA, K. SMETANA, B. ZLÁ, S. ŽALUDOVÁ, M.

Originální název

Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings

Typ

abstrakt

Jazyk

angličtina

Originální abstrakt

The contribution is focused on hypereutectic alloys or nickel aluminides formation, where was utilized the unconventional method consisted of (i) sacrificial coating deposition onto the substrate and (ii) subsequent heat treatment. The 99.7 wt.% Ni powder was used to produce the nickel coating, by means of high velocity oxyfuel spraying, onto the 99.999 wt.% Al sheet surfaces. Then the as-sprayed samples were heat treated up to the temperatures of 700, 900 and 1200oC. The heating/cooling rate of the samples of 5oC / min was set up. The hypereutectic alloys or nickel aluminides formation was investigated by using differential thermal analysis, metallography and scanning electron microscopy. To estimate the chemical composition of phases the energy dispersive microanalysis was used. The resulting microstructure of Al-Ni hypereutectic alloys originated up to the temperature of 900oC is of aluminium matrix and Al3Ni eutectic. Instead of that, the nickel aluminides were produced at the temperature of 1200oC and consist of Al3Ni2 and Al3Ni intermetallics. The image analysis was also applied to quantify the undissolved nickel coating thickness and parameters of eutectic.

Klíčová slova

hypereutectic alloy, nickel aluminides, nickel coatings

Autoři

ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SMETANA, B.; ZLÁ, S.; ŽALUDOVÁ, M.

Vydáno

3. 9. 2012

Nakladatel

Materials Research Society of Serbia

Místo

Belgrade, Serbia

Strany od

39

Strany do

39

Strany počet

1

URL

http://www.mrs-serbia.org.rs/index.php/publications

BibTex

@misc{BUT98839,
  author="Ladislav {Čelko} and Lenka {Klakurková} and Karel {Slámečka} and Bedřich {Smetana} and Simona {Zlá} and Monika {Žaludová}",
  title="Formation of Hypereutectic Aluminium-based Alloys or Nickel Aluminides Using Sacrificial Nickel Coatings",
  booktitle="YUCOMAT 2012, The Book of Abstracts",
  year="2012",
  edition="14",
  pages="39--39",
  publisher="Materials Research Society of Serbia",
  address="Belgrade, Serbia",
  url="http://www.mrs-serbia.org.rs/index.php/publications",
  note="abstract"
}