Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
SOKOLÁŘ, R. VODOVÁ, L.
Originální název
Sintering of feldspar rocks from czech quarries
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
angličtina
Originální abstrakt
Sintering behaviour as dependence of water absorption, flexural strength and firing shrinkage of dry pressed test samples made from three different types of feldspar rocks on the firing temperature (11201300° C) was determined. Potassium, potassiumsodium and sodium-calcium industrially milled feldspars with similar granulometry according to equivalent mean spherical diameter of the grains d(0.5) in the range of 16.620.8 ¯m were used. The sintering process was described according to changes in mineralogical composition of the fired test samples too. During the sintering process, feldspars gradually disappear in phasesfirst of all alkali feldspars (albite, microcline); anorthite (calcium feldspar) is more resistant to melting thanks to its higher melting temperature and it increases the sintering temperature of feldspar. Sodium-potassium feldspar Z43NaK50 with the lowest content of alkalis (3.35% of K2O and 2.67% of Na2O) and the highest equivalent mean spherical diameter d(0.5) showed the most intensive sintering activity. An explanation of this unexpected fact can be found in the equilibrium phase diagrams and in the formation of low melting eutectic mixtures.
Klíčová slova
Feldspars, Sintering, Water absorption, Mineralogical composition
Autoři
SOKOLÁŘ, R.; VODOVÁ, L.
Rok RIV
2015
Vydáno
20. 1. 2015
Nakladatel
Ceramic Society of japan
Místo
Japan
ISSN
1882-0743
Periodikum
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
Ročník
123
Číslo
1
Stát
Japonsko
Strany od
62
Strany do
67
Strany počet
6
BibTex
@article{BUT117253, author="Radomír {Sokolář} and Lucie {Keršnerová}", title="Sintering of feldspar rocks from czech quarries", journal="JOURNAL OF THE CERAMIC SOCIETY OF JAPAN", year="2015", volume="123", number="1", pages="62--67", issn="1882-0743" }