Detail publikace

Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis

LISÝ, M. POSPÍŠIL, J. ŠTELCL, O. ŠPILÁČEK, M.

Originální název

Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

This paper deals with a use of CFD modelling for optimization of supply of secondary combustion air in the two-chamber biomass boiler combusting very wet biomass (capacity ca. 200 kW). Objective of the analysis is to observe the impact of a diameter of a secondary air supply pipe and air flow velocity on mixing of the secondary air with flue gas in the combustion chamber. The numerical model of the experimental boiler was built for subsequent utilization of CFD computation based on the finite element method. The commercial code STAR-CD was used for development of parametrical studies. Series of calculations were carried out for four different diameters of air distribution pipes and for three different air velocities in a distribution orifice. Quality of air dispersion in flue gas flow was assessed in the vertical cross section lead at the end of the combustion chamber. The results of calculation were verified on the experimental installation of the boiler. Influence of secondary air mixing on emission production was measured and analysed. Emissions of pollutants for recommended air distribution comply with emission limits stipulated in the most stringent class 5 according to ČSN-EN 303-5 as well as with emission limits under Regulation No. 405/2012 Sb.

Klíčová slova

CFD analysis, secondary air, flow, mixing, concentration

Autoři

LISÝ, M.; POSPÍŠIL, J.; ŠTELCL, O.; ŠPILÁČEK, M.

Vydáno

1. 4. 2016

Nakladatel

Trans Tech Publications, Switzerland

Místo

Švýcarsko

ISSN

1662-7482

Periodikum

Applied Mechanics and Materials

Ročník

832

Číslo

1

Stát

Švýcarská konfederace

Strany od

231

Strany do

237

Strany počet

7

BibTex

@article{BUT122916,
  author="Martin {Lisý} and Jiří {Pospíšil} and Otakar {Štelcl} and Michal {Špiláček}",
  title="Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis",
  journal="Applied Mechanics and Materials",
  year="2016",
  volume="832",
  number="1",
  pages="231--237",
  doi="10.4028/www.scientific.net/AMM.832.231",
  issn="1662-7482"
}