Detail publikace

Preliminary Design and Analysis of Regenerative Heat Exchanger

KILKOVSKÝ, B. JEGLA, Z.

Originální název

Preliminary Design and Analysis of Regenerative Heat Exchanger

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Heat regenerators transfer heat from one gas to another, with by storage in solids. This type of heat exchanger is used primarily when heat has to be transferred between enormous amounts of gases, when the gases are dirty and liable to plug up the recuperative heat exchangers, or when the gas is too hot or reactive. Regenerative heat exchanger can provide at the same volume much higher heat transfer area and lower friction factor than recuperative heat exchanger. Furthermore, regenerative heat exchanger has in most cases better efficiency and its construction is much simpler. The calculation of this type heat exchanger is relatively complicated. Moreover, a suitable and adequately accurate calculation method is not freely available. Those are the main reasons why the companies are not interested in this type of heat exchanger. On the grounds of requirements from companies we started to deal with design of regenerative heat exchangers and creation of suitable calculation model that would cover all their requirements. The various possibilities of regenerative heat exchanger applications will be described in the paper. For various types of geometries of heat transfer surface their advantages and disadvantages will be described. On the basis of measurements of several types of heat transfer surfaces geometries their possibilities of heat absorption and amount of pressure drop will be compared. The mathematical models for calculation of these heat exchangers will be the main issue of the paper. The possibilities of improvement and extension of the simple calculation model will be also described/introduced. This model can be used for preliminary calculation of regenerator for given purpose. Simultaneous using of regenerator as heat exchanger and a reactor in which, for example, can take place cleaning of waste gas will be discussed. The possibility of simultaneous use of regenerative heat exchanger as the reactor, where cleaning of waste could take place, will be considered.

Klíčová slova

heat exchangers, design, regenerator

Autoři

KILKOVSKÝ, B.; JEGLA, Z.

Vydáno

1. 10. 2016

Nakladatel

Aidic Servizi, S.r.l.

Místo

Milano, Italy

ISBN

978-88-95608-42-6

Kniha

Chemical Engineering Transactions

Číslo edice

52

ISSN

2283-9216

Periodikum

Chemical Engineering Transactions

Ročník

52

Stát

Italská republika

Strany od

655

Strany do

660

Strany počet

6

URL

http://www.aidic.it/cet/16/52/082.pdf

BibTex

@inproceedings{BUT130503,
  author="Bohuslav {Kilkovský} and Zdeněk {Jegla}",
  title="Preliminary Design and Analysis of Regenerative Heat Exchanger",
  booktitle="Chemical Engineering Transactions",
  year="2016",
  journal="Chemical Engineering Transactions",
  volume="52",
  number="52",
  pages="655--660",
  publisher="Aidic Servizi, S.r.l.",
  address="Milano, Italy",
  doi="10.3303/CET1652110",
  isbn="978-88-95608-42-6",
  issn="2283-9216",
  url="http://www.aidic.it/cet/16/52/082.pdf"
}