Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
KRAJŇÁKOVÁ, P. DE ALMEIDA GOUVÊA, L. ČUPERA, J. JAN, V. DLOUHÝ, I. SPOTZ, Z.
Originální název
Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
angličtina
Originální abstrakt
Nanostructured CoNiCrAlY bond coatings were deposited onto a Ni-based alloy (Inconel 718) by both HVOF and CGDS spraying techniques. Subsequently, the deposits were remelted by an electron beam up to depth of about 100 μm, which resulted in the removal of defects on the substrate to the bond coat interface. This paper examines the influence of the parameters used for EB remelting, including multiple remelting on the microstructural changes, phase modification and the final state of the coatings. The amount of porosity in the coatings and the surface roughness has been evaluated. Scanning electron microscopy and X-ray diffraction were performed in order to characterize the phase modification before and after the applied treatment. The results indicated that multiple remelting improved the coating in terms of porosity, surface roughness decrease, mechanical strength and chemical homogeneity. This study also demonstrates that the CGDS deposition represents a promising alternative for CoNiCrAlY bond coat manufacturing.
Klíčová slova
bond coat, CoNiCrAlY, cold gas dynamic spraying, HVOF spraying, EB remelting
Autoři
KRAJŇÁKOVÁ, P.; DE ALMEIDA GOUVÊA, L.; ČUPERA, J.; JAN, V.; DLOUHÝ, I.; SPOTZ, Z.
Vydáno
28. 5. 2018
Nakladatel
IMT Ljubljana
Místo
Ljubljana, Slovinsko
ISSN
1580-2949
Periodikum
Materiali in tehnologije
Ročník
52
Číslo
3
Stát
Slovinská republika
Strany od
289
Strany do
293
Strany počet
5
BibTex
@article{BUT148142, author="Petra {Krajňáková} and Larissa {Moravčíková de Almeida Gouvea} and Jan {Čupera} and Vít {Jan} and Ivo {Dlouhý} and Zdeněk {Spotz}", title="Influence of multiple electron-beam remeltings on the characteristics of HVOF and CGDS sprayed conicraly coatings", journal="Materiali in tehnologije", year="2018", volume="52", number="3", pages="289--293", doi="10.17222/mit.2017.092", issn="1580-2949" }