Detail publikace

Micro-milling machinability of pure molybdenum

MOURALOVÁ, K. BENEŠ, L. PROKEŠ, T. ZAHRADNÍČEK, R. BEDNÁŘ, J. OTOUPALÍK, J. FIŠEROVÁ, Z. FIALA, Z.

Originální název

Micro-milling machinability of pure molybdenum

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

As a result of the miniaturization of machined shapes, the conventional micro-milling technology has been widely used in many industrial areas. However, the machining of some types of materials proved to be very difficult. One of the hard-to-machine materials is also pure molybdenum, which, thanks to its high melting temperature, is used, besides others, in the energy industry and for physical applications. To ensure proper functionality of the manufactured parts, it is essential that they are machined without defects and with the required surface quality. The aim of this study was to find an optimal tool with a diameter of 0.8 mm and to set the machine parameters for machining of pure molybdenum with the highest quality of the surface layer possible without any defects. For this purpose, 26-round design of experiment (DoE) was carried out, in which the parameters, like cutting speed, feed and coating (yes/no) were systematically changed. The machined samples were evaluated for topography using a 3D profilometer, their morphology and burrs were studied using an electron microscope, and the microscopic implications on the microstructure of the subsurface layer were studied on the produced lamellae using transmission electron microscope (TEM). In addition, the tool wear curve was examined and evaluated. In this study, an optimal setup of machining parameters for pure molybdenum machining (cutting speed = 80 m/min, feed = 0.002 mm/tooth, non-coated tool) was found with which high-quality and defect-free surfaces can be machined.

Klíčová slova

milling, micro machining, pure molybdenum, topography, TEM lamella, Design of experiment

Autoři

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; OTOUPALÍK, J.; FIŠEROVÁ, Z.; FIALA, Z.

Vydáno

2. 2. 2019

Nakladatel

Springer

Místo

Spojené království Velké Británie a Severního Irska

ISSN

1433-3015

Periodikum

International Journal of Advanced Manufacturing Technology

Ročník

102

Číslo

9

Stát

Spojené království Velké Británie a Severního Irska

Strany od

4153

Strany do

4165

Strany počet

13

URL

http://link.springer.com/article/10.1007/s00170-019-03524-5

BibTex

@article{BUT155376,
  author="Kateřina {Mouralová} and Libor {Beneš} and Tomáš {Prokeš} and Radim {Zahradníček} and Josef {Bednář} and Jan {Otoupalík} and Zuzana {Otoupalík} and Zdeněk {Fiala}",
  title="Micro-milling machinability of pure molybdenum",
  journal="International Journal of Advanced Manufacturing Technology",
  year="2019",
  volume="102",
  number="9",
  pages="4153--4165",
  doi="10.1007/s00170-019-03524-5",
  issn="1433-3015",
  url="http://link.springer.com/article/10.1007/s00170-019-03524-5"
}