Detail publikace

Cutting conditions and tool wear when machining wood-based materials

Chladil, J., Sedlák, J., Rybářová, E. R., Kučera, M., and Dado, M.

Originální název

Cutting conditions and tool wear when machining wood-based materials

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The article deals with data in the cutting process of wood-based materials. The cutting process influences the shape and dimensions of a cutting edge. The experiments were focused on monitoring the changes of the cutting edge in machining of particle board and the influence of cutting speed on the tool wear. Cutting tests were performed during milling at cutting rates in the range 7.95 to 17.9 m/s (477 to 1074 m/min), a depth of cut of 9.5 mm, and a tooth feed of 0.05 mm. The wear process of cutting wedge during particle board milling is characterized by a decrease in the cutting edge of insert blades. The comparative digital dial gauge was used for measurement of the cutting wedge recession. The course of the wear of wood based materials exhibited similarity in graphical representation with abrasive material cutting. The resulting dependency may be used for selection of the most suitable cutting conditions according to operator requirements.

Klíčová slova

Machining, wood, tool wear dulling, cutting conditions

Autoři

Chladil, J., Sedlák, J., Rybářová, E. R., Kučera, M., and Dado, M.

Vydáno

8. 3. 2019

Nakladatel

BioResources

ISSN

1930-2126

Periodikum

BIORESOURCES

Ročník

14

Číslo

2

Stát

Spojené státy americké

Strany od

3495

Strany do

3505

Strany počet

11

URL

https://bioresources.cnr.ncsu.edu/issues/vol14-issue2/page/8/

BibTex

@article{BUT156184,
  author="Josef {Chladil} and Josef {Sedlák}",
  title="Cutting conditions and tool wear when machining wood-based materials",
  journal="BIORESOURCES",
  year="2019",
  volume="14",
  number="2",
  pages="3495--3505",
  doi="10.15376/biores.14.2.3495-3505",
  issn="1930-2126",
  url="https://bioresources.cnr.ncsu.edu/issues/vol14-issue2/page/8/"
}