Detail publikace

Analysis of influence of model input parameters on ash fouling rate predicted by CFD

STROUHAL, J. JUŘENA, T. JEGLA, Z.

Originální název

Analysis of influence of model input parameters on ash fouling rate predicted by CFD

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The study of particulate matter deposition on solid surfaces is an important subject for development of technologies for combustion of solid alternative fuels such as municipal solid waste (MSW). For this purpose, new experimental facility was build and available mathematical models of particulate matter fouling were examined. One of the two main parts of experimental facility is a deposition chamber, which became a subject to a subsequent simulations of initial stage of fouling process. We consider MSW as a testing fuel. A simple fouling model from group of critical velocity models was selected. Model parameter values were obtained from literature. Influence of variations of one of these parameters (reference diameter) on predicted deposition mass flux was studied. For considered size distribution the overall deposition mass flow shows only a little dependence on chosen reference diameter. Also simulation yielded the deposition chamber efficiency, showing ability to retain 15 % of overall particulate matter mass flux for considered size distribution.

Klíčová slova

MSW combustion; ash fouling; deposit formation; CFD; particulate matter

Autoři

STROUHAL, J.; JUŘENA, T.; JEGLA, Z.

Vydáno

24. 11. 2020

Nakladatel

Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics

Místo

Brno, Czech Republic

ISBN

978-80-214-5896-3

Kniha

Engineering Mechanics 2020

Edice

1

ISSN

1805-8248

Periodikum

Engineering Mechanics ....

Ročník

26

Číslo

1

Stát

Česká republika

Strany od

468

Strany do

471

Strany počet

4

URL

https://www.engmech.cz/im/proceedings/show_p/2020/468

BibTex

@inproceedings{BUT167876,
  author="Jiří {Strouhal} and Tomáš {Juřena} and Zdeněk {Jegla}",
  title="Analysis of influence of model input parameters on ash fouling rate predicted by CFD",
  booktitle="Engineering Mechanics 2020",
  year="2020",
  series="1",
  journal="Engineering Mechanics ....",
  volume="26",
  number="1",
  pages="468--471",
  publisher="Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics",
  address="Brno, Czech Republic",
  doi="10.21495/5896-3-468",
  isbn="978-80-214-5896-3",
  issn="1805-8248",
  url="https://www.engmech.cz/im/proceedings/show_p/2020/468"
}