Detail publikace

Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil bath

MOURALOVÁ, K. BENEŠ, L. PROKEŠ, T. ZAHRADNÍČEK, R. FRIES, J. PLICHTA, T.

Originální název

Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil bath

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The unconventional Wire Electric Discharge Machining (WEDM) technology represents a vital manufacturing technology in different industrial branches. This technology is essential because of the possibility to machine difficult-to-machine materials such as sintered carbides. For this reason, this study analyses the machinability of sintered carbides WKP23S, WSM33S a WK1 with WEDM in both water and oil baths. We investigated the influence of the machining parameters, namely, pulse off time, gap voltage, discharge current, pulse on time, and wire feed, on the cutting speed, surface roughness, and defect occurrence. We investigated 9 different roughness parameters, analysed surface morphology with an electron microscope, and also analysed cross-sectioned samples. We found out that machining sintered carbides in oil bath yields better results than machining in deionized water. The oil tank prevents the removal of the cobalt binder, but it does not reduce fissure occurrence in any significant way. The lowest Ra value, that is 0.7 µm was recorded for the WKP23S sample when machined in oil and Ra 0.9 µm when the same material was machined in water.

Klíčová slova

WEDM; cracks; sintered carbide; oil; water; machining parameters

Autoři

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; FRIES, J.; PLICHTA, T.

Vydáno

23. 1. 2023

Nakladatel

Springer

ISSN

1433-3015

Periodikum

International Journal of Advanced Manufacturing Technology

Ročník

124

Číslo

10

Stát

Spojené království Velké Británie a Severního Irska

Strany počet

11

URL

https://link.springer.com/article/10.1007/s00170-023-10913-4

BibTex

@article{BUT181535,
  author="Kateřina {Mouralová} and Libor {Beneš} and Tomáš {Prokeš} and Radim {Zahradníček} and Jiří {Fries} and Tomáš {Plichta}",
  title="Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil bath",
  journal="International Journal of Advanced Manufacturing Technology",
  year="2023",
  volume="124",
  number="10",
  pages="11",
  doi="10.1007/s00170-023-10913-4",
  issn="1433-3015",
  url="https://link.springer.com/article/10.1007/s00170-023-10913-4"
}