Detail publikace

Poly(3-hydroxybutyrate) (PHB) and Polycaprolactone (PCL) Based Blends for Tissue Engineering and Bone Medical Applications Processed by FDM 3D Printing

KROBOT, Š. MELČOVÁ, V. MENČÍK, P. KONTÁROVÁ, S. RAMPICHOVÁ, M. HEDVIČÁKOVÁ, V. MOJŽIŠOVÁ, E. BACO, A. PŘIKRYL, R.

Originální název

Poly(3-hydroxybutyrate) (PHB) and Polycaprolactone (PCL) Based Blends for Tissue Engineering and Bone Medical Applications Processed by FDM 3D Printing

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

In the presented work, poly(3-hydroxybutyrate)-PHB-based composite blends for bone medical applications and tissue engineering are prepared and characterized. PHB used for the work was in two cases commercial and, in one case, was extracted by the chloroform-free route. PHB was then blended with poly(lactic acid) (PLA) or polycaprolactone (PCL) and plasticized by oligomeric adipate ester (Syncroflex, SN). Tricalcium phosphate (TCP) particles were used as a bioactive filler. Prepared polymer blends were processed into the form of 3D printing filaments. The samples for all the tests performed were prepared by FDM 3D printing or compression molding. Differential scanning calorimetry was conducted to evaluate the thermal properties, followed by optimization of printing temperature by temperature tower test and determination of warping coefficient. Tensile test, three-point flexural test, and compression test were performed to study the mechanical properties of materials. Optical contact angle measurement was conducted to determine the surface properties of these blends and their influence on cell adhesion. Cytotoxicity measurement of prepared blends was conducted to find out whether the prepared materials were non-cytotoxic. The best temperatures for 3D printing were 195/190, 195/175, and 195/165 degrees C for PHB-soap/PLA-SN, PHB/PCL-SN, and PHB/PCL-SN-TCP, respectively. Their mechanical properties (strengths similar to 40 MPa, moduli similar to 2.5 GPa) were comparable with human trabecular bone. The calculated surface energies of all blends were similar to 40 mN/m. Unfortunately, only two out of three materials were proven to be non-cytotoxic (both PHB/PCL blends).

Klíčová slova

3D printing; FDM; poly(3-hydroxybutyrate); bone tissue engineering; scaffold; biocompatibility; polycaprolactone; polylactic acid

Autoři

KROBOT, Š.; MELČOVÁ, V.; MENČÍK, P.; KONTÁROVÁ, S.; RAMPICHOVÁ, M.; HEDVIČÁKOVÁ, V.; MOJŽIŠOVÁ, E.; BACO, A.; PŘIKRYL, R.

Vydáno

22. 5. 2023

Nakladatel

MDPI

Místo

BASEL

ISSN

2073-4360

Periodikum

Polymers

Ročník

15

Číslo

10

Stát

Švýcarská konfederace

Strany od

1

Strany do

17

Strany počet

17

URL

https://www.mdpi.com/2073-4360/15/10/2404

Plný text v Digitální knihovně

http://hdl.handle.net/11012/209755

BibTex

@article{BUT183556,
  author="Štěpán {Krobot} and Veronika {Melčová} and Přemysl {Menčík} and Soňa {Kontárová} and Michaela {Rampichová} and Věra {Hedvičáková} and Ema {Mojžišová} and Andrej {Baco} and Radek {Přikryl}",
  title="Poly(3-hydroxybutyrate) (PHB) and Polycaprolactone (PCL) Based Blends for Tissue Engineering and Bone Medical Applications Processed by FDM 3D Printing",
  journal="Polymers",
  year="2023",
  volume="15",
  number="10",
  pages="1--17",
  doi="10.3390/polym15102404",
  issn="2073-4360",
  url="https://www.mdpi.com/2073-4360/15/10/2404"
}