Detail publikace

Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers

ASTROUSKI, I. KŮDELOVÁ, T. BARTULI, E.

Originální název

Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Motor oil must be appropriately treated in motors, and aluminum plate heat exchangers are used to cool it. An aluminum heat exchanger is an additional part of the oil treatment module, which increases its size and weight. Two compact plastic shell-and-tube heat exchangers were tested alongside with aluminum heat exchanger to evaluate the efficiency of the plastic cooling core inside the oil module. A total of 63 experimental points were tested on three heat exchangers with good thermal balance (discrepancy of about 1,8 %), and the data were used to evaluate the heat transfer coefficients. While plastic unit PA11 showed the heat outputs exceeding the heat output of the aluminum plate unit by about 7 %, the pressure drops were about ten times higher. The unit PEEK showed good performance and pressure drops on the oil side, but the heat transfer was limited by a small heat transfer surface. Analysis of thermal resistances confirmed that the thermal resistance between the wall and the oil is dominant due to the oil's low thermal conductivity and high viscosity. The results showed that optimization of the fiber structures is needed, aiming to increase the oil flow around the fiber structures.

Klíčová slova

Oil cooler, hollow fibers, shell and tube heat exchanger, plastics

Autoři

ASTROUSKI, I.; KŮDELOVÁ, T.; BARTULI, E.

Vydáno

25. 10. 2024

Nakladatel

Elsevier Ltd.

ISSN

2214-157X

Periodikum

Case Studies in Thermal Engineering

Ročník

Volume 63

Číslo

105329

Stát

Nizozemsko

Strany od

1

Strany do

11

Strany počet

11

URL

https://www.sciencedirect.com/science/article/pii/S2214157X24013601

BibTex

@article{BUT191237,
  author="Ilja {Astrouski} and Tereza {Kůdelová} and Erik {Bartuli}",
  title="Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers",
  journal="Case Studies in Thermal Engineering",
  year="2024",
  volume="Volume 63",
  number="105329",
  pages="1--11",
  doi="10.1016/j.csite.2024.105329",
  issn="2214-157X",
  url="https://www.sciencedirect.com/science/article/pii/S2214157X24013601"
}