Detail publikace

Development of a test specimen carrier for the Taylor anvil test using 3D additive printing technology

JOPEK, M. MÜLLER, S. ŘIHÁČEK, J.

Originální název

Development of a test specimen carrier for the Taylor anvil test using 3D additive printing technology

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Dynamic material testing is increasingly crucial for establishing a comprehensive description of material models. One of the primary testing methods is the Taylor Anvil Test (TAT). In this test, strain rates of up to 10 5 s -1 can be achieved at impact speeds of 250 m/s. Proper evaluation of a specific material specimen in this test relies on delivering the test specimen to the impact point both centrally and perpendicularly, as well as at the moment of reaching the maximum impact speed. This Article addresses the development of a new carrier for round test specimens manufactured using additive 3D printing technology from a polyactide polymer adapted for the TAT device with a calibre of 17 mm. The Article closely examines the influence of geometric parameters of the carrier itself, optimized using the Ansys Fluid Flow software, with a focus on internal ballistics, particularly to achieve perpendicular impact and maximum impact speed without causing the destruction of the carrier. A new type of test carrier was designed and subsequently tested for round test specimens made of the aluminium alloy Al 2024T3, evaluating both the impact speeds of the carrier under identical initiation pressure parameters in the filling chamber and the impact speed parameters of the specimen, respectively, the strain rate of the test specimen.

Klíčová slova

Taylor anvil test; Ansys fluid flow; Specimen carrier; Internal ballistics; Additive 3D printing technology

Autoři

JOPEK, M.; MÜLLER, S.; ŘIHÁČEK, J.

Vydáno

1. 10. 2024

Nakladatel

Elsevier

Místo

OXFORD

ISSN

0734-743X

Periodikum

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Ročník

192

Číslo

10

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

10

Strany počet

10

URL

https://www.sciencedirect.com/science/article/pii/S0734743X24001507

BibTex

@article{BUT193503,
  author="Miroslav {Jopek} and Samuel {Müller} and Jan {Řiháček}",
  title="Development of a test specimen carrier for the Taylor anvil test using 3D additive printing technology",
  journal="INTERNATIONAL JOURNAL OF IMPACT ENGINEERING",
  year="2024",
  volume="192",
  number="10",
  pages="1--10",
  doi="10.1016/j.ijimpeng.2024.105026",
  issn="0734-743X",
  url="https://www.sciencedirect.com/science/article/pii/S0734743X24001507"
}