Energy Utilization from Industrial Sludge Processing

článek v časopise - ostatní, Jost

angličtina

Pulp and paper plants produce large amount of sludge. Environmental problems connected with this waste were not solved satisfactorily in the past. Since land filling is not a suitable solution from environmental point of view thermal treatment process proved itself to be the most appropriate solution. A unit for thermal treatment with capacity more than 100 tons of wet sludge per day had been built in one large pulp and paper plant some years ago, located in a mining area. When built, this unit was quite modern. However, because of an increasing number of more and more sweeping environmental laws affecting the process industry, the unit required a complete retrofit. The retrofit has been realized in three stages. The first stage provided mainly means to cut down the emissions below the limits given by environmental legislation. Second stage can be characterized as "waste to energy" one. The third stage of retrofit consisted in substituting the currently used fuel by mining gas. The unit for thermal treatment of sludge after retrofit can be considered as one of the most up-to-date incinerators with a waste-to-energy system at present. Economic profitability, positive environmental impact and other beneficial features of the retrofit are clearly shown.

Sludge, Energy Utilization

STEHLÍK, P.; ORAL, J.; ŠIKULA, J.; PUCHÝŘ, R.; HAJNÝ, Z.; MARTINÁK, P.

2005

12. 4. 2005

0360-5442

Energy

30

4

Spojené království Velké Británie a Severního Irska

1343

1352

9