Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
KŘUPKA, I. HARTL, M. VRBKA, M.
Originální název
Effect of surface texturing on mixed lubricated non-conformal contacts
Typ
článek v časopise - ostatní, Jost
Jazyk
angličtina
Originální abstrakt
The behaviour of surface texturing based on shallow micro-dents was observed within mixed lubricated non-conformal contacts and compared with results obtained under thin film elastohydrodynamic conditions. Thin film colorimetric interferometry was used to observe the changes in lubrication film thickness. It was found that lubricant emitted by micro-dents could effectively lift off the real roughness features that provided an increase in average but also the local minimum film thicknesses. On the contrary to smooth contact conditions no film thickness reduction is obvious either downstream or upstream the micro-dent. The possible beneficial effect of surface texturing on mixed lubricated contact was checked through the qualitative wear test. It confirmed that an array of shallow micro-dents reduced asperity interactions of rubbing surfaces. Moreover, the effect of micro-dents on rolling contact fatigue was also considered in this study. It has been shown that individual dents would have to be much deeper compared to those used in surface texturing experiments to cause reduction in contact fatigue life. It can be suggested from the obtained results that property designed surface texturing could help to increase the separation of rubbing surfaces under mixed lubrication conditions.
Klíčová slova
mixed lubrication; film thickness; surface texturing
Autoři
KŘUPKA, I.; HARTL, M.; VRBKA, M.
Rok RIV
2008
Vydáno
13. 11. 2008
Nakladatel
Elsevier
Místo
EU
ISSN
0301-679X
Periodikum
Tribology International
Ročník
41
Číslo
11
Stát
Spojené království Velké Británie a Severního Irska
Strany od
1063
Strany do
1073
Strany počet
BibTex
@article{BUT46857, author="Ivan {Křupka} and Martin {Hartl} and Martin {Vrbka}", title="Effect of surface texturing on mixed lubricated non-conformal contacts", journal="Tribology International", year="2008", volume="41", number="11", pages="1063--1073", issn="0301-679X" }