Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
KLAKURKOVÁ, L. ČELKO, L. ZLÁ, S. SMETANA, B.
Originální název
Formation of Hypereutectic Aluminium Alloy from Sacrificial Nickel Coating Investigated by Differential Thermal and Microstructural Analysis
Typ
abstrakt
Jazyk
angličtina
Originální abstrakt
Nickel coating was sprayed from the 99,7 wt.% nickel powder by high velocity oxyfuel technique onto the 99.5 wt.% aluminium sheet surface. After the spraying was the samples annealed up to the temperature of 700, 800 and 1000oC. The heating rate of the samples of 5oC / min and cooling rate of 20oC/min was set up. Formation of binary hypereuectic aluminium alloy was investigated by using differential thermal analysis, metalography and scanning compare the results obtained. The microstructure of Al-Ni hypereutectic alloy is of aluminium matrix and Al3Ni eutectic. To estimate the chemical composition of phases the energy dispersive microanalysis was used. With increasing temperature the eutectic coarsen and the particles of primary Al3Ni phase is started to be formed. The image analysis was applied to measure the resulting undissolved nickel coating thickness nad Al3Ni eutectic parameters.
Klíčová slova
Al; Al-Ni hypereutectic alloy; DTA; diffusion; HVOF
Autoři
KLAKURKOVÁ, L.; ČELKO, L.; ZLÁ, S.; SMETANA, B.
Vydáno
5. 9. 2011
Nakladatel
IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts
Místo
Belgrade, Serbia
Strany od
103
Strany do
Strany počet
1
BibTex
@misc{BUT89767, author="Lenka {Klakurková} and Ladislav {Čelko} and Simona {Zlá} and Bedřich {Smetana}", title="Formation of Hypereutectic Aluminium Alloy from Sacrificial Nickel Coating Investigated by Differential Thermal and Microstructural Analysis", booktitle="YUCOMAT 2011", year="2011", edition="13", volume="13", number="13", pages="103--103", publisher="IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts", address="Belgrade, Serbia", note="abstract" }