Publications

• 2021

  MAJERIK, J; BARENYI, I.; POKORNY, Z.; SEDLAK, J.; NEUMANN, V.; DOBROCKY, D.; JAROS, A.; KRBATA, M.; JAMBOR, J.; KUSENDA, R.; SAGAN, M.; PROCHAZKA, J. Analysis of the OCHN3MFA steel in terms of cutting forces and cutting material flank wear mechanisms in hard turning processes. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2021, vol. 69, no. 6, p. 1-8. ISSN: 2300-1917.
  Detail | WWW

  SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; CHLADIL, J.; JAROŠ, A.; KOUŘIL, K.; VARHANÍK, M.; MAJERÍK, J.; BARÉNYI, I.; ČEP, R. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2021, vol. 28, no. 3, p. 974-982. ISSN: 1330-3651.
  Detail | WWW | Full text in the Digital Library

• 2019

  SLANÝ, M.; SEDLÁK, J.; ZOUHAR, J.; ZEMČÍK, O.; CHLADIL, J.; JAROŠ, A.; KOUŘIL, K.; VARHANÍK, M.; MAJERÍK, J.; BARÉNYI, I. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. In TRANSFER 2019. 2019. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíně, 2019. p. 181-199. ISBN: 978-80-8075-889-9.
  Detail | WWW

  BARÉNYI, I.; MAJERÍK, J.; BEZECNÝ, J.; KRBAŤA, M.; SEDLÁK, J.; JAROŠ, A. Material and Technological Aspects while Processing of Selected Ultra High Strength Steel. Manufacturing TECHNOLOGY, 2019, vol. 2019, no. 2, p. 184-189. ISSN: 1213-2489.
  Detail | WWW

  JAROŠ, A.; SEDLÁK, J.; JAŠEK, P. The Investigation of the Influence of Modern Coating Applied to the Cutting Inserts During Machining. Manufacturing TECHNOLOGY, 2019, vol. 19, no. 4, p. 589-595. ISSN: 1213-2489.
  Detail | WWW

  BARÉNYI, I.; MAJERÍK, J.; POKORNÝ, Z.; SEDLÁK, J.; BEZECNÝ, J.; DOBROCKÝ, D.; JAROŠ, A.; ECKERT, M.; JAMBOR, J.; KUSENDA, R. Material and technological investigation of machined surfaces of the OCHN3MFA steel. KOVOVE MATERIALY-METALLIC MATERIALS, 2019, vol. 57, no. 2, p. 131-142. ISSN: 1338-4252.
  Detail | WWW

• 2018

  SEDLÁK, J.; KOUŘIL, K.; CHLADIL, J.; JAROŠ, A.; FIALA, Z. Analysis of finishing very precise holes by the reaming head MT3. MM Science Journal, 2018, vol. 2018, no. 3, p. 2421-2428. ISSN: 1803-1269.
  Detail | WWW

  SEDLÁK, J.; JAROŠ, A.; SLANÝ, M.; KOUŘIL, K.; MAJERÍK, J. Analysis of the Power Load when Finishing Very Precise Holes by Reaming Head MT3. Manufacturing TECHNOLOGY, 2018, vol. 2018, no. 4, p. 659-666. ISSN: 1213-2489.
  Detail | WWW

  SEDLÁK, J.; OPRŠÁL, R.; POLZER, A.; JAROŠ, A.; CHLADIL, J. A special tool for making a detail of the T-groove. Manufacturing TECHNOLOGY, 2018, vol. 2018, no. 1, p. 117-123. ISSN: 1213-2489.
  Detail | WWW

  SEDLÁK, J.; OSIČKA, P.; CHLADIL, J.; JAROŠ, A.; POLZER, A. Residual stress when face milling aluminium alloys. MM Science Journal, 2018, vol. 2018, no. 4, p. 2530-2535. ISSN: 1803-1269.
  Detail | WWW

  JAROŠ, A.; SEDLÁK, J.; VONDRA, J. Investigation of the Influence of Modern Coating Applied to the Cutting Inserts During Machining. MM Science Journal, 2018, vol. 2018, no. 4, p. 2516-2520. ISSN: 1803-1269.
  Detail | WWW

• 2017

  JAROŠ, A.; SEDLÁK, J.; MAJERÍK, J.; JAŠEK, P. THE INVESTIGATION OF THE INFLUENCE OF MODERN COATINGS APPLIED TO THE CUTTING INSERTS DURING MACHINING. In Transfer 2017. 2017. Trenčín: Trenčianskej univerzity Alexandra Dubčeka v Trenčíne, 2017. p. 1-10. ISBN: 978-80-8075-787-8.
  Detail | WWW

  SEDLÁK, J.; POLZER, A.; CHLADIL, J.; SLANÝ, M.; JAROŠ, A. Shape Inspection of Gear Prototypes Using Reverse Engineering Method. Manufacturing TECHNOLOGY, 2017, vol. 2017, no. 6, p. 945-952. ISSN: 1213-2489.
  Detail | WWW

  SEDLÁK, J.; POLZER, A.; CHLADIL, J.; SLANÝ, M.; JAROŠ, A. Reverse Engineering Method Used for Inspection of Stirrer´ s Gearbox Cabinet Prototype. MM Science Journal, 2017, vol. 2017, no. 4, p. 1877-1882. ISSN: 1803-1269.
  Detail | WWW

  SEDLÁK, J.; KUDLÁČOVÁ, B.; ZEMČÍK, O.; JAROŠ, A.; SLANÝ, M. Production of Planetary Mechanism Model Prototype using Additive Method of Rapid Prototyping. Manufacturing TECHNOLOGY, 2017, vol. 2017, no. 3, p. 374-381. ISSN: 1213-2489.
  Detail | WWW

  MAJERÍK, J.; SEDLÁK, J.; JAROŠ, A. TECHNOLOGICAL AND MATERIAL ASPECTS WHILE PROCESSING OF SELECTED ULTRA HIGH STRENGTH STEEL. In TRANSFER 2017. 2017. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíne, 2017. p. 1-10. ISBN: 978-80-8075-787-8.
  Detail | WWW

  SEDLÁK, J.; JAROŠ, A.; SLANÝ, M.; KOUŘIL, K.; MAJERÍK, J. Analysis of the Power Load when Finishing Very Precise Holes by Reaming Head MT3. In TRANSFER 2017. 2017. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíne, 2017. p. 1-11. ISBN: 978-80-8075-787-8.
  Detail | WWW

• 2016

  PÍŠKA, M.; JAROŠ, A. A NEW DESIGN OF ROUGHING MILLING CUTTER AND ITS MACHINING PERFORMANCE. MM Science Journal, 2016, vol. 2016, no. 10, p. 1035-1039. ISSN: 1805-0476.
  Detail | WWW

  KOLÁŘ, L.; JAROŠ, A.; FIALA, Z. PRODUCTIVITY OF TROCHOIDAL MILLING. In Transfer 2016. Trenčín: 2016. ISBN: 978-80-8075-756- 4.
  Detail

  SEDLÁK, J.; BACHORÍK, P.; JAROŠ, A.; POLZER, A.; KALIVODA, M. Application of Modern Technologies in Production Design of Car Component Prototype. MM Science Journal, 2016, vol. 2016, no. 5, p. 1387-1391. ISSN: 1803-1269.
  Detail | WWW

  JAROŠ, A.; FIALA, Z. Investigation of the Influence of PVD Coatings Deposited on HSS Milling Cutter. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 3, p. 506-512. ISSN: 1213-2489.
  Detail | WWW

  KUDLÁČOVÁ, B.; SEDLÁK, J.; JAROŠ, A.; SLANÝ, M. Application of Fused Deposition Modelling Method to Production of Planetary Mechanism Model. In Materials Structure & Micromechanics of Fracture 8. Brno: VUTIUM Brno, 2016. p. 197-197. ISBN: 9788021453579.
  Detail

• 2015

  FIALA, Z.; JAROŠ, A.; SEDLÁK, J.; KOLÁŘ, L.; BLAŽKOVÁ, V. Effect of Spindle Unit Extrusion on Stability of Machining Process. Manufacturing TECHNOLOGY, 2015, vol. 15, no. 3, p. 329-333. ISSN: 1213- 2489.
  Detail

  SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A. Production Method of Implant Prototype of Knee-Joint Femoral Component. Manufacturing TECHNOLOGY, 2015, vol. 15, no. 2, p. 195-204. ISSN: 1213-2489.
  Detail

  SEDLÁK, J.; SLANÝ, M.; FIALA, Z.; JAROŠ, A.; BLAŽKOVÁ, V. Testing of Implant Prototype of Femoral Component Using Hydraulic Machine ZD40. Manufacturing TECHNOLOGY, 2015, vol. 2015, no. 3, p. 416-423. ISSN: 1213- 2489.
  Detail | WWW

  BLAŽKOVÁ, V.; SEDLÁK, J.; JAROŠ, A.; FIALA, Z.; MOURALOVÁ, K.; KOLÁŘ, L. Obrábění pokročilých keramických materiálů. Strojírenská technologie, 2015, vol. 20, no. 1, p. 2-11. ISSN: 1211- 4162.
  Detail

• 2014

  FIALA, Z.; JAROŠ, A.; KOLÁŘ, L. The analysis of specific cutting forces at machining of composite materials. In ERIN 214, 8th International Conference for Young Researchers and Ph.D. Students; Proceedings of Abstracts. 1. Litera Brno: Brno University of Technology, 2014. p. 1-8. ISBN: 978-80-214-4931- 2.
  Detail

  FIALA, Z.; PÍŠKA, M.; JAROŠ, A. On the analysis of the sound spectrum at machining of the glass- polyester composite material. MM Scinece Journal, 2014, vol. 7, no. 1, p. 1-4. ISSN: 1805- 0476.
  Detail

  JAROŠ, A.; KOLÁŘ, L.; FIALA, Z. The development of new HSS milling cutter with negative geometry for roughing operations. In ERIN 214, 8th International Conference for Young Researchers and Ph.D. Students; Proceedings of Abstracts. 1. Litera Brno: Brno University of Technology, 2014. p. 1-8. ISBN: 978-80-214-4931- 2.
  Detail

• 2013

  FIALA, Z.; JAROŠ, A.; SLANÝ, M. Vývoj měrné řezné síly s rozvíjejícím se opotřebením řezného nástroje. In MMK 2013. Hradec Králové: Magnanimitas, 2013. p. 3429-3438. ISBN: 978-80-87952-00- 9.
  Detail

  JAROŠ, A.; FIALA, Z. Porovnání povlakovaných a nepovlakovaných VBD pro čelní frézování zušlechtěné oceli. In MEZINÁRODNÍ MASARYKOVA KONFERENCE PRO DOKTORANDY A MLADÉ VĚDECKÉ PRACOVNÍKY. 1. Hradec Králové: Magnananitas, 2013. p. 3225-3232. ISBN: 978-80-87952-00- 9.
  Detail

• 2012

  JAROŠ, A.; FIALA, Z.; DVOŘÁČEK, J. INVESTIGATION OF THE INFLUENCE OF ALTICRN COATING FOR DRY MILLING OF CONSTRUCTION STEEL 1. 8159. In Sborník příspěvků Mezinárodní Masarykovy konference pro doktorandy a mladé vědecké pracovníky 2012. 1. Hradec Králové: MAGNANIMITAS, 2012. p. 3475-3482. ISBN: 978-80-905243-3- 0.
  Detail

  FIALA, Z.; JAROŠ, A.; DVOŘÁČEK, J. Influence of a tool wear on sound frequency of milling process. In Mezinárodní Masarykova konference pro doktorandy a vědecké pracovníky. 1. Hradec Králové: Magnanimitas, 2012. p. 3483-3489. ISBN: 978-80-905243-3-0.
  Detail

*) Publications are generated once a 24 hours.