Publications

• 2024

  KALINA, L.; BÍLEK, V.; FLÍDROVÁ, M.; MARKUSÍK, D.; TOPOLÁŘ, L.; FLÁDR, J. CONDUCTOMETRY ANALYSIS - BENEFICIAL METHOD FOR DETERMINING THE CHEMICAL COMPOSITION OF ALKALINE SILICATE SOLUTIONS. Materiali in tehnologije, 2024, vol. 58, no. 3, p. 357-361. ISSN: 1580-2949.
  Detail | WWW

  DVOŘÁK, R.; PAZDERA, L.; TOPOLÁŘ, L.; JAKUBKA, L.; PUCHÝŘ, J. Non-destructive Testing of CIPP Defects Using Machine Learning Approach. Materiali in tehnologije, 2024, vol. 58, no. 5, p. 13-17. ISSN: 1580-2949.
  Detail | WWW

  SKIBICKY, S.; DVOŘÁK, R.; PAZDERA, L.; TOPOLÁŘ, L.; KOCÁB, D.; ALEXA, M.; CENDROWSKI, K.; HOFFMANN, M. Anisotropic mechanical properties of 3D printed mortar determined by standard flexural and compression test and acoustic emission. CONSTRUCTION AND BUILDING MATERIALS, 2024, vol. 452, no. 138957, p. 1-20. ISSN: 1879-0526.
  Detail | WWW

• 2023

  TOPOLÁŘ, L.; KOCÁB, D.; HRUBÝ, P.; JAKUBKA, L.; HODULÁKOVÁ, M.; HALAMOVÁ, R. The Effect of Specimen Size on Acoustic Emission Parameters and Approximate Position of Defects Obtained during Destructive Testing of Cementitious and Alkali-Activated Degraded Fine-Grained Materials. Materials, 2023, vol. 16, no. 9, p. 1-17. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  KOCÁB, D.; TOPOLÁŘ, L.; ALEXA, M.; LISZTWAN, D.; ČANĚK, M. Decline in the Ultrasonic Pulse Velocity in Ceramic Tiles Depending on the Adhesive. In Special Concrete and Composites 2021. AIP conference proceedings. College Park, Maryland: AIP Conference Proceedings, 2023. p. 020011-1 (020011-5 p.)ISBN: 978-0-7354-4514-7. ISSN: 0094-243X.
  Detail

  DVOŘÁK, R.; PAZDERA, L.; TOPOLÁŘ, L.; JAKUBKA, L.; PUCHÝŘ, J. Non-destructive Testing of CIPP Defects Using Machine Learning Approach. 28th INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. 1. Portorož, Slovenia: Narodni in univerzitetni knjižnici v Ljubljani, 2023. p. 33-33. ISBN: 78-961-94088-5-8.
  Detail | WWW

  ROVNANÍK, P.; KUSÁK, I.; SCHMID, P.; TOPOLÁŘ, L. Effect of Moisture on the Piezoresistive Properties of Aluminosilicate-Based Building Materials. In International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures SynerCrete’23 - Volume 1. RILEM Bookseries. Switzerland: Springer, 2023. p. 313-324. ISBN: 978-3-031-33210-4. ISSN: 2211-0844.
  Detail | WWW

  DVOŘÁK, R.; JAKUBKA, L.; TOPOLÁŘ, L.; RABENDA, M.; WIROWSKI, A.; PUCHÝŘ, J.; KUSÁK, I.; PAZDERA, L. Non-Destructive Characterization of Cured-in-Place Pipe Defects. Materials, 2023, vol. 16, no. 24, p. 1-31. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

• 2022

  HRUBÝ, P.; KALINA, L.; BÍLEK, V.; KEPRDOVÁ, Š.; MÁSILKO, J.; PLŠKOVÁ, I.; KOPLÍK, J.; TOPOLÁŘ, L. Comparison of Testing Methods for Evaluating the Resistance of Alkali-Activated Blast Furnace Slag Systems to Sulfur Dioxide. Materials, 2022, vol. 15, no. 4, p. 1-16. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  VYMAZAL, T.; PAZDERA, L.; TOPOLÁŘ, L.; KOCÁB, D. Hodnocení poškození betonu zmrazovacími a rozmrazovacími cykly pomocí detailní analýzy signálů akustické emise. Beton TKS, 2022, vol. 22, no. 1, p. 78-84. ISSN: 1213-3116.
  Detail | WWW

  HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L.; KALINA, L.; ILIUSHCHENKO, V.; KOPLÍK, J.; MÁSILKO, J.; ŠOUKAL, F. Resistance of alkali-activated blast furnace slag to acids. In IOP Conference Series: Materials Science and Engineering. Journal of Physics: Conference Series. Telč: IOP Publishing, 2022. p. 1-8. ISSN: 1742-6596.
  Detail | WWW

  KALINA, L.; BÍLEK, V.; SMILEK, J.; ŠOUKAL, F.; TOPOLÁŘ, L.; BÍLÝ, P.; FLÁDR, J. Towards sustainable building materials through lithium silicate densifiers. International Conference on Concrete Repair, Rehabilitation and Retrofitting. 2022. p. 241-242.
  Detail

  POKORNÝ, P.; PRODANOVIC, N.; TOPOLÁŘ, L.; PAZDERA, L.; KUSÁK, I. Corrosion of Zinc Dust in Cement Paste-Evaluation of Hydrogen Gas Evolution Time Period. In Materials and Technologies of Modern Production. Key Engineering Materials (print). Trans Tech Publications Ltd, 2022. p. 205-210. ISBN: 978-3-0364-1168-2. ISSN: 1013-9826.
  Detail | WWW

  MIZEROVÁ, C.; ROVNANÍK, P.; KUSÁK, I.; SCHMID, P.; TOPOLÁŘ, L. Self-Sensing Properties of Carbon Black or Graphite Modified Fly Ash Geopolymer under Flexure. In Solid State Technologies and Modern Production. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 103-108. ISBN: 978-3-0364-1171-2. ISSN: 1012-0394.
  Detail | WWW

• 2021

  PLŠKOVÁ, I.; HRUBÝ, P.; TOPOLÁŘ, L.; MATYSÍK, M. Degradation of Materials Based on Alkali-Activated Blast-Furnace Slag after Exposure to Aggressive Environments. In Binders, Materials and Technologies in Modern Construction VII. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd., 2021. p. 131-136. ISSN: 1662-9779.
  Detail

  HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L.; KALINA, L.; MARKO, M.; ŠOUKAL, F.; DVOŘÁK, R.; HERČÍK, T. Decalcification resistance of various alkaliactivated materials. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2021. p. 1-8. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  HRUBÝ, P.; KALINA, L.; BÍLEK, V.; TOPOLÁŘ, L.; MARKO, M.; HERČÍK, T. DEGRADATION RESISTANCE OF ALKALI-ACTIVATED BLAST FURNACE SLAG. Chémia a technológie pre život. Bratislava: Slovenská chemická knižnica, 2021. ISBN: 978-80-8208-064-6.
  Detail | WWW

  HAJZLER, J.; HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L. Assessment of Degradation of Alkali-Activated Blast Furnace Slag Progress Using the Mercury Intrusion Porosimetry. Studentská konference CHEMIE JE ŽIVOT. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2021. p. 75-76. ISBN: 978-80-214-6002-7.
  Detail | WWW

  HAJZLER, J.; HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L. Assessment of Degradation of Alkali-Activated Blast Furnace Slag Progress Using the Mercury Intrusion Porosimetry. Studentská odborná konference CHEMIE JE ŽIVOT 2021 Sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2021. p. 75-76. ISBN: 978-80-214-6002-7.
  Detail | WWW

  DVOŘÁK, R.; TOPOLÁŘ, L. Effect of Hammer Type on Generated Mechanical Signals in Impact-Echo Testing. Materials, 2021, vol. 14, no. 3, p. 1-19. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  KOCÁB, D.; TOPOLÁŘ, L.; ALEXA, M.; LISZTWAN, D.; ČANĚK, M. Pokles rychlosti ultrazvukového vlnění v keramickém obkladu v závislosti na použitém lepidle. 18. KONFERENCE SPECIÁLNÍ BETONY, sborník příspěvků. Ostrava: SEKURKON s.r.o., 2021. p. 18-22. ISBN: 978-80-86604-87-9.
  Detail | WWW

  PAZDERA, L.; TOPOLÁŘ, L.; HODULÁKOVÁ, M.; DVOŘÁK, R. METODA AKUSTICKÉ EMISE APLIKOVANÁ NA ZATĚŽOVANÉ VZORKY MALT. Defektoskopie 2021 Sbornik prispevku 51. mezinárodní konference a výstava NDT techniky. 1. Praha, Cesko: Czech Society for Nondestructive Testing, 2021. p. 53-62. ISBN: 978-80-214-5988-5.
  Detail

  MELICHAR, T.; BYDŽOVSKÝ, J.; DVOŘÁK, R.; TOPOLÁŘ, L.; KEPRDOVÁ, Š. The Behavior of Cement-Bonded Particleboard with Modified Composition under Static Load Stress. Materials, 2021, vol. 14, no. 22, p. 1-31. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; KOCÁB, D.; PAZDERA, L.; VYMAZAL, T. Analysis of Acoustic Emission Signals Recorded during Freeze-Thaw Cycling of Concrete. Materials, 2021, vol. 14, no. 5, p. 1-16. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  KUCHARCZYKOVÁ, B.; ŠIMONOVÁ, H.; KOCÁB, D.; TOPOLÁŘ, L. Advanced Evaluation of the Freeze–Thaw Damage of Concrete Based on the Fracture Tests. Materials, 2021, vol. 14, no. 21, p. 1-22. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  MIZEROVÁ, C.; KUSÁK, I.; TOPOLÁŘ, L.; SCHMID, P.; ROVNANÍK, P. Self-Sensing Properties of Fly Ash Geopolymer Doped with Carbon Black under Compression. Materials, 2021, vol. 14, no. 16, p. 1-11. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  DVOŘÁK, R.; HRUBÝ, P.; TOPOLÁŘ, L. Characterization of Carbonatation Rate of Alkali-Activated Blast Furnace Slag in Various Environments. In Binders, Materials and Technologies in Modern Construction VII. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2021. p. 40-46. ISBN: 978-3-0357-3870-4. ISSN: 1012-0394.
  Detail | WWW

  PAZDERA, L.; TOPOLÁŘ, L.; DVOŘÁK, R.; HODULÁKOVÁ, M. Analysis of Acoustic Emission Pressure Test of Mortar Specimens with Different Materials. In EAN 2021 - 59th International Scientific Conference on Experimental Stress Analysis - Book of Full Papers. 1. Prague: Czech Technical University, 2021. p. 173-181. ISBN: 978-80-01-06885-4.
  Detail

• 2020

  KALINA, L.; BÍLEK, V.; BRADOVÁ, L.; TOPOLÁŘ, L. Blastfurnace Hybrid Cement with Waste Water Glass Activator: Alkali-Silica Reaction Study. Materials, 2020, vol. 13, no. 16, p. 1-9. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  HODULÁKOVÁ, M.; TOPOLÁŘ, L. The Application of a New Technique to Determine the Beginning of the Setting Time for Cement-Based Materials. In Advances in Asset Management and Condition Monitoring. Smart Innovation, Systems and Technologies. Smart Innovation, Systems and Technologies. Switzerland: Springer Nature Switzerland AG 2020, 2020. p. 903-914. ISBN: 978-3-030-57744-5. ISSN: 2190-3018.
  Detail | WWW

  Dvorak R., Topolar L., Bilek V., Hruby P. Study of Latent Self-healing Ability of Sodium Hydroxide Activated Blast Furnace Slag Systems via Non-destructive Measurement. In Smart Innovation, Systems and Technologies. Smart Innovation, Systems and Technologies. 1. Huddersfield, UK: Springer, Cham, 2020. p. 915-926. ISBN: 978-3-030-57744-5. ISSN: 2190-3018.
  Detail | WWW

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B. Pilot Study of Mechanical Waves Passing Through Fine-Grained Cement Composite during the Early Hydration Process. In 8th International Conference on Engineering and Innovative Materials. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd., 2020. p. 243-247. ISBN: 978-3-0357-1605-4. ISSN: 1013-9826.
  Detail | WWW

  HODULÁKOVÁ, M.; TOPOLÁŘ, L. Study of Fine-Grained Cementitious Composites in Solidification Phase Using Acoustic Testing Technique. In Applied Mechanics and Materials Vol. 897. Applied Mechanics and Materials. Switzerland: Trans Tech Publications Ltd, 2020. p. 111-116. ISBN: 978-3-0357-1472-2. ISSN: 2297-8941.
  Detail

  PLŠKOVÁ, I.; MATYSÍK, M.; TOPOLÁŘ, L.; BÍLEK, V. Influence of alkali-activated materials placement during curing on their dynamic parameters. In Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020. MATEC Web of Conferences. France: EDP Sciences, 2020. p. 1-8. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; KOCÁB, D.; ŠLANHOF, J.; SCHMID, P.; DANĚK, P.; NOVÁČEK, J. Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading. Materials, 2020, vol. 13, no. 14, p. 1-14. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  PAZDERA, L.; TOPOLÁŘ, L.; KOCÁB, D.; VYMAZAL, T.; MIKULÁŠEK, K. Evaluation of the Acoustic Emission Measurement performed during Freeze-Thaw Cycles Loading. In Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 1. Ostrava: Czech Society for Mechanics, 2020. p. 387-392. ISBN: 978-80-248-4451-0.
  Detail

  DVOŘÁK, R.; TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V.; HRUBÝ, P.; PLŠKOVÁ, I. Modal Analysis of Alkali Activated Slab Degraded by Ultraviolet Light. In Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 1. Ostrava, Czech: Czech Society for Mechanics, 2020. p. 55-63. ISBN: 978-80-248-4451-0.
  Detail

  HRUBÝ, P.; BÍLEK, V.; KALINA, L.; ŠOUKAL, F.; TOPOLÁŘ, L.; DVOŘÁK, R. The Influence of Alkaline Activator Type on the Carbonatation process of the Alkali-activated Blast Furnace Slag. Studentská odborná konference - CHEMIE JE ŽIVOT - sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta chemická, Purkyňova 464/118, 612 00 Brno, 2020. p. 73-74. ISBN: 978-80-214-5920-0.
  Detail | WWW

  HAJZLER, J.; BÍLEK, V.; HRUBÝ, P.; TOPOLÁŘ, L. Vliv aktivátoru na vývoj porozity alkalicky aktivované strusky během její degradace. Czech Chemical Society Symposium Series. 2020. ISSN: 2336-7210.
  Detail

  PLŠKOVÁ, I.; MATYSÍK, M.; TOPOLÁŘ, L.; HRUBÝ, P. NDT Monitoring of Alkali-activated Material Carbonation. In Rehabilitation and Reconstruction of Buildings III. Key Engineering Materials (print). Michaela Kostelecká. Switzerland: Trans Tech Publications Ltd., 2020. p. 45-50. ISBN: 9783035736533. ISSN: 1013-9826.
  Detail

  HODUL, J.; MAJEROVÁ, J.; DROCHYTKA, R.; DVOŘÁK, R.; TOPOLÁŘ, L.; PAZDERA, L. Efect of Chemical Aggressive Media on the Flexural Properties of Cured-In-Place Pipes Supported by Microstructure Observation and Acoustic Emission. Materials, 2020, vol. 13, no. 14, p. 1-17. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L. Pilot study of linear localization using the acoustic emission method during a semi-circular bending test. In Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 1. Ostrava: Czech Society for Mechanics, 2020. p. 540-546. ISBN: 978-80-248-4451-0.
  Detail

• 2019

  TOPOLÁŘ, L.; DVOŘÁK, R.; HODULÁKOVÁ, M.; PAZDERA, L. Comparison of pulse-echo-methods for testing of heat degradation concrete. In RESEARCH AND MODELLING IN CIVIL ENGINEERING 2018. 1st. Koszalin: Koszalin University of Technology Publishing House, 2019. p. 213-236. ISBN: 978-83-7365-502-7.
  Detail

  ROVNANÍK, P.; KUSÁK, I.; TOPOLÁŘ, L.; SCHMID, P. Sensing properties of slag-based geopolymer composite with carbon fi-bers under compressive loading. In MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES 2019. Vilnius, Litva: VGTU Press, 2019. p. 146-151. ISBN: 978-609-476-197-3.
  Detail | WWW

  VYŠVAŘIL, M.; TOPOLÁŘ, L.; DVOŘÁK, R. Acoustic insulation properties of lime mortars with natural lightweight aggregate. In 4th Central European Symposium on Building Physics (CESBP 2019). MATEC Web of Conferences. EDP Sciences, 2019. p. 1-6. ISSN: 2261-236X.
  Detail

  TOPOLÁŘ, L. Frequency Analysis of Mechanical Waves Passing Through Cement Composites During the Early Hydration Phase. 15th International Symposium on Nondestrutive Characterization of Materials, Portorož, Slovenia: ASNT event, 2019.
  Detail

  TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P. Vliv obsahu sazí na aktivitu akustické emise při cyklickém namáhání kompozitních materiálů. DEFEKTOSKOPIE 2019 NDE for Safety. Praha: VUT v Brně a ČNDT z.s., 2019. p. 131-137. ISBN: 978-80-214-5799-7.
  Detail

  TOPOLÁŘ, L.; PLŠKOVÁ, I.; DVOŘÁK, R.; HODULÁKOVÁ, M.; PAZDERA, L.; HRUBÝ, P. Sledování změn dynamických vlastností alkalicky aktivovaných materiálů při různých procesech degradace. DEFEKTOSKOPIE 2019 NDE for Safety. Praha: VUT v Brně a ČNDT z.s., 2019. p. 139-145. ISBN: 978-80-214-5799-7.
  Detail

  BÍLEK, V.; HRUBÝ, P.; HAJZLER, J.; KALINA, L.; DVOŘÁK, R.; TOPOLÁŘ, L. Barevné variace alkalické aktivace během její degradace. 2019. p. 1-31.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; TOPOLÁŘ, L.; KOCÁB, D. Influence of curing conditions on mechanical and fracture properties of alkali activated slag concrete. In Proceedings of 4th International Conference on Innovative Materials, Structures and Technologies (IMST 2019). IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing Ltd., 2019. p. 1-8. ISSN: 1757-899X.
  Detail

  BÍLEK, V.; HRUBÝ, P.; HAJZLER, J.; KALINA, L.; PAZDERA, L.; TOPOLÁŘ, L. Kolorimetrické posuzování míry degradace alkalicky aktivovaných materiálů. 2019.
  Detail

  BÍLEK, V.; HAJZLER, J.; HRUBÝ, P.; KALINA, L.; HODULÁKOVÁ, M.; TOPOLÁŘ, L. Využití rtuťové intruzní porozimetrie pro charakterizaci degradovaných alkalicky aktivovaných materiálů. 2019.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; HALAMOVÁ, R. The usage of the acoustic emission method for the experimental determination of the damage progress in the fine-grained cementitious composites subjected to loading. In Proceedings for the 2018 fib Congress held in Melbourne, Australia. International fib Congress on Better, Smarter, Stronger, 2018. Switzerland: Fédération internationale du béton (fib), 2019. p. 2669-2675. ISBN: 978-1-877040-15-3. ISSN: 2617-4820.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; TOPOLÁŘ, L.; KOCÁB, D. Influence of curing conditions on mechanical and fracture properties of alkali activated slag concrete. Book of Abstracts of 4th International Conference Innovative Materials, Structures and Technologies. Riga: RTU Press, Riga Technical University, 2019. p. 23-24. ISBN: 978-9934-22-356-3.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; DVOŘÁK, R.; HODULÁKOVÁ, M.; PLŠKOVÁ, I.; BÍLEK, V.; MIKULÁŠEK, K. Using modal-parameter-based analysis of the behaviour of alkali-activated material with surface degraded by ultraviolet radiation. In EXPERIMENTAL STRESS ANALYSIS - CONFERENCE PROCEEDINGS. 1. Brno University of Technology – Faculty of Mechanical Engineering: Czech Society for Mechanics, 2019. p. 378-383. ISBN: 978-80-214-5766-9.
  Detail

  PAZDERA, L.; ČAJKA, R.; TOPOLÁŘ, L.; MATEČKOVÁ, P.; BÍLEK, V.; SUCHARDA, O. Measurement and Utilization of Acoustic Emission for the Analysis and Monitoring of Concrete Slabs on the Subsoil. Periodica Polytechnica - Civil Engineering, 2019, vol. 63, no. 2, p. 608-620. ISSN: 0553-6626.
  Detail | WWW

  TOPOLÁŘ, L.; ROVNANÍK, P.; MIZEROVÁ, C.; SCHMID, P. Comparison of the effect of different additives on acoustic emission parameters obtained during three-point bending tests of alkali-activated slag composites. ENGINEERING FAILURE ANALYSIS, 2019, vol. 105, no. 2019, p. 496-502. ISSN: 1350-6307.
  Detail | WWW

  PLŠKOVÁ, I.; TOPOLÁŘ, L.; KOMÁRKOVÁ, T.; MATYSÍK, M.; CHOBOLA, Z.; STONIŠ, P. Verification of the ability of selected acoustic methods to detect the amount of steel fibers in concrete. In Advances and Trends in Engineering Sciences and Technologies III- Proceedings of the 3rd International Conference on Engineering Sciences and Technologies, ESaT 2018. Schipholweg 107C, 2316 XC Leiden, The Netherlands: CRC Press/Balkema, 2019. p. 217-222. ISBN: 978-0-367-07509-5.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L. The assessment of the structural changes of fine-grained cement-based composites in the early-age using acoustic testing. International Review of Applied Sciences and Engineering, 2019, vol. 10, no. 1, p. 23-28. ISSN: 2063-4269.
  Detail | WWW

  KOCÁB, D.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; HALAMOVÁ, R. The analysis of acoustic emission signals detected during the loading of cement-based materials. ENGINEERING FAILURE ANALYSIS, 2019, vol. 99, no. 2019, p. 18-25. ISSN: 1350-6307.
  Detail | WWW

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B. The Application of Acoustic Emission Technique to Monitor the Early Setting Process of Cement Pastes. In 2019 3rd International Conference on Building Materials and Materials Engineering (ICBMM 2019). MATEC Web of Conferences. 2019. EDP Sciences, 2019. p. 1-4. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  SUCHARDA, O.; PAZDERA, L.; MARCALÍKOVÁ, Z.; TOPOLÁŘ, L.; KOZIELOVÁ, M.; BÍLEK, V. Measurement of acoustic emission at fibre reinforcement concrete slab with subsoil. In 25th International Conference and Meeting of Departments, CONSTRUMAT 2019. IOP Conference Series: Materials Science and Engineering. 2019. p. 1-9. ISSN: 1757-8981.
  Detail

• 2018

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P.; KERŠNER, Z. Crack Initiation of Alkali-activated Slag Based Composites with Graphite Filler. In Key Engineering Materials: Non-Traditional Cement and Concrete. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2018. p. 57-60. ISBN: 978-3-0357-1096-0. ISSN: 1013-9826.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; KERŠNER, Z.; MERTA, I.; DRAGAS, J.; IGNJATOVIC, I.; KOMLJENOVIC, M.; NIKOLIC, V. Crack initiation of selected geopolymer mortar with hemp fibres. In ECF22 − Loading and Environmental effects on Structural Integrity. Procedia Structural Integrity. Elsevier, 2018. p. 578-583. ISSN: 2452-3216.
  Detail

  MIKHAILOVA, O.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; ROVNANÍK, P. Influence of Polymer Additives on Mechanical Fracture Properties and on Shrinkage of Alkali Activated Slag Mortars. In Key Engineering Materials: Non-Traditional Cement and Concrete. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2018. p. 39-44. ISBN: 978-3-0357-1096-0. ISSN: 1013-9826.
  Detail | WWW

  HODULÁKOVÁ, M.; TOPOLÁŘ, L. VYUŽITÍ METODY AKUSTICKÉ EMISE PRO SLEDOVÁNÍ STRUKTURNÍCH ZMĚN V ČERSTVÉ CEMENTOVÉ MALTĚ. Juniorstav 2018. Brno: ECON publishing, s.r.o., 2018. p. 666-670. ISBN: 978-80-86433-69-1.
  Detail

  KOCÁB, D.; BÍLEK, V.; TOPOLÁŘ, L.; DANĚK, P.; KUCHARCZYKOVÁ, B.; PŐSSL, P. Influence of a Shrinkage-Reducing Admixture on the Damage to the Internal Structure of Alkali-Activated Composites Curing Testing of the Modulus of Elasticity. In Solid State Phenomena: 24th Concrete Days. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 28-33. ISBN: 978-3-0357-1284-1. ISSN: 1662-9779.
  Detail

  KOCÁB, D.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; PŐSSL, P.; HODULÁKOVÁ, M. Observation of the Development of the Elastic Modulus and Strength in a Polymer-Cement Mortar Using the Acoustic Emission Method. In Solid State Phenomena: 24th Concrete Days. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 76-81. ISBN: 978-3-0357-1284-1. ISSN: 1662-9779.
  Detail

  HODULÁKOVÁ, M.; KOCÁB, D.; TOPOLÁŘ, L. The experimental comparison of parameters signals of acoustic emission during destructive test on composites based on cement. 2nd Baltic Conference for Students and Young Researchers. Gdaňsk: Gdaňsk University of Technology, 2018. p. 81-82. ISBN: 978-83-60261-61-3.
  Detail

  TOPOLÁŘ, L.; KOCÁB, D.; HODULÁKOVÁ, M.; HALAMOVÁ, R. Influence of the Maximum Aggregate Grain Size on the Modulus of Elasticity and on the Parameters of the Acoustic Emission of concrete Exposed to High Temperatures. In Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 134-139. ISBN: 978-80-214-5446-0. ISSN: 1662-9779.
  Detail

  KOMÁRKOVÁ, T.; LÁNÍK, J.; TOPOLÁŘ, L.; ŠTOLLER, J.; STONIŠ, P. Experimental assessment of steel fibre reinforced concretes with different concentrations of fibres. In IOP Conf. Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2018. p. 1-6. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; KERŠNER, Z.; MERTA, I.; DRAGAS, J.; IGNJATOVIC, I.; KOMLJENOVIC, M.; NIKOLIC, V. Crack initiation of selected geopolymer mortar with hemp fibres. Book of abstracts of 22nd European Conference on Fracture. Beograd: Society for Structural Integrity and Life, 2018. p. 151-151. ISBN: 978-86-900696-0-9.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KERŠNER, Z.; DRAGAS, J.; IGNJATOVIC, I.; KOMLJENOVIC, M.; NIKOLIC, V. Comparison of different alkali activated mortars with hemp fibres response during fracture test by acoustic emission method. The 9th International Conference on Multiscale Material Modeling Abstrakt Book. Osaka: 2018. p. 310-310.
  Detail

  PLŠKOVÁ, I.; TOPOLÁŘ, L.; KOMÁRKOVÁ, M.; MATYSÍK, M.; CHOBOLA, Z.; STONIŠ, P. Amount of Steel Fibers in Concrete Detection by Acoustic NDT Methods. In 3rd International Conference on Engineering Sciences and Technologies. Slovakia: Technical University of Košice, Faculty of Civil Engineering, 2018. p. 1-4. ISBN: 978-80-553-2982-6.
  Detail

  TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P. Comparison of the effect of different additives on acoustic emission parameters obtained during three-point bending tests of alkali-activated slag composites. Elsevier, 2018. p. 12-12.
  Detail

  ROZSYPALOVÁ, I.; VYHLÍDAL, M.; DVOŘÁK, R.; MAJDA, T.; TOPOLÁŘ, L.; PAZDERA, L.; ŠIMONOVÁ, H.; KERŠNER, Z. CHARACTERIZATION OF CEMENT-BASED COMPOSITE EXPOSED TO HIGH TEMPERATURES VIA ULTRASONIC PULSE METHOD. In 9th annual Conference NANO & MACRO MECHANICS 2018. Acta Polytechnica CTU Proceedings. Praha: Czech Technical University in Prague, 2018. p. 99-103. ISBN: 978-80-01-06457-3. ISSN: 2336-5382.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z.; ROVNANÍK, P. Fracture response of alkali-activated slag mortars reinforced by carbon fibres. In International Conference Building Materials, Products and Technologies. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2018. p. 1-6. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P. Experimental evaluation of the effect of carbon fibres on acoustic emission parameters obtained during compressive strength tests of alkaliactivated slag composites. In International Conference Building Materials, Products and Technologies. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2018. p. 1-6. ISSN: 1757-8981.
  Detail | Full text in the Digital Library

  PAZDERA, L.; TOPOLÁŘ, L.; HODULÁKOVÁ, M.; DVOŘÁK, R.; MIKULÁŠEK, K. Analysis of temperature degraded concrete at high temperature by applying of non-linear characteristics. In International Conference Building Materials, Products and Technologies. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2018. p. 1-6. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  DVOŘÁK, R.; TOPOLÁŘ, L.; HODULÁKOVÁ, M. Evaluation of high-temperature degraded concrete with content of blast furnace slag by non-destructive approach. FEMS JUNIOR EUROMAT CONFFERENCE 2018, Book of abstracts. 1. Budapešť: Hungarian Society of Materials Science, 2018. p. 80-81. ISBN: 978-963-05-9917-7.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; HODULÁKOVÁ, M.; MIKULÁŠEK, K.; OROLÍN, P.; ROTH, O. The Classification of Cracks Recorded during the Cyclic Loading of the Reinforced Concrete Beam by Acoustic Emission Method. In 19th Conference on the Rehabilitation and Reconstruction of Buildings. Key Engineering Materials (print). Switzerland: Trans Tech Publication, 2018. p. 66-69. ISBN: 978-3-0357-1361-9. ISSN: 1013-9826.
  Detail

  PAZDERA, L.; DVOŘÁK, R.; HODULÁKOVÁ, M.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; CHOBOLA, Z. Application of Acoustic Emission Method and Impact Echo Method to Structural Rehabilitation. In 19th Conference on the Rehabilitation and Reconstruction of Buildings. Key Engineering Materials (print). Switzerland: Trans Tech Publication, 2018. p. 81-85. ISBN: 978-3-0357-1361-9. ISSN: 1013-9826.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; HODULÁKOVÁ, M.; DVOŘÁK, R.; SMUTNÝ, J.; CHOBOLA, Z. Evaluation of acoustic emission signals obtained during the three-point bending loading of thermally degraded concrete samples. In Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings. 1. Harachov: Czech society for Mechanics, 2018. p. 326-331. ISBN: 9788027040629.
  Detail

  TOPOLÁŘ, L.; KEPRDOVÁ, Š.; PAZDERA, L. The influence of aggregate grain size on the parameters of acoustic emission signals obtained from a three-point bending test on concrete specimens degraded by high-temperatures. Book of abstracts of 22nd European Conference on Fracture. Beograd: Society for Structural Integrity and Life, 2018. p. 318-318. ISBN: 978-86-900696-0-9.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B. The monitoring of structural changes in the fresh cement mortar by acoustic emission method. 10th International Scientific Conference on Civil and Enviromental Engineering. 1. Tatranská Lomnica: Technical University of Košice, Faculty of Civil Engineering, 2018. p. 1-6. ISBN: 978-80-553-2952-9.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B. ACOUSTIC EMISSION PARAMETERS OF ALKALI ACTIVATED FLY ASH SPECIMENS WITH HEMP FIBRES UNDER STATIC LOADING. SynerCrete’18: Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing Expertise and Bridging Scales of Space and Time. FRANCE: RILEM publications S.A.R.L., 2018. p. 383-388. ISBN: 978-2-35158-202-2.
  Detail | WWW

  HODULÁKOVÁ, M.; KOCÁB, D.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B. The experimental comparison of parameters signals of acoustic emission during destructive test on composites based on cement. In 2nd Baltic Conference for Students and Young Researchers. MATEC Web of Conferences. Gdynia, Poland: MATEC Web of Conferences, 2018. p. 1-7. ISBN: 978-83-60261-61-3. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KOCÁB, D. The use of acoustic methods to describe the behaviour of cement pastes in the early stage of ageing. SynerCrete’18: Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing Expertise and Bridging Scales of Space and Time. Funchal, Madeira, Portugalsko: RILEM publications S.A.R.L., 2018. p. 351-356. ISBN: 978-2-35158-211-4.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; HALAMOVÁ, R. The usage of the acoustic emission method for the experimental determination of the damage progress in the fine-grained cementitious composites subjected to loading. Proceedings for the 2018 fib Congress held in Melbourne. Melbourne, Australia: Federation internationale du beton (fib), 2018. p. 544-545. ISBN: 978-1-877040-14-6.
  Detail

  ROVNANÍK, P.; MÍKOVÁ, M.; KUSÁK, I.; SCHMID, P.; TOPOLÁŘ, L. SELF-SENSING PROPERTIES OF ALKALI-ACTIVATED SLAG COMPOSITE WITH CARBON NANOTUBES. In SynerCrete '18 "Interdisciplinary Approaches for Cement-based Materials and Structural Concrete: Synergizing expertise and Bridging Scales of Space and Time". Paris, France: Rilem Publications S.A.R.L., 2018. p. 473-478. ISBN: 978-2-35158-202-2.
  Detail

  TOPOLÁŘ, L.; KEPRDOVÁ, Š.; PAZDERA, L. The influence of aggregate grain size on the parameters of acoustic emission signals obtained from a three-point bending test on concrete specimens degraded by high-temperatures. In ECF22 - Loading and Environmental effects on Structural Integrity. Procedia Structural Integrity. Elsevier, 2018. p. 1177-1182. ISSN: 2452-3216.
  Detail | WWW

  KOCÁB, D.; TOPOLÁŘ, L.; BÍLEK, V.; KUCHARCZYKOVÁ, B.; HODULÁKOVÁ, M.; HALAMOVÁ, R. Experimental Analysis of the Development of Compressive Strength, Modulus of Elasticity and Acoustic Emission Parameters of Alkali-Activated Composites. In Special Concrete and Composites 2017. Key Engineering Materials (print). Switzerland: Trans Tech Publications Ltd, 2018. p. 266-271. ISBN: 978-3-0357-1240-7. ISSN: 1013-9826.
  Detail

• 2017

  KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; DANĚK, P.; KOCÁB, D.; MISÁK, P. Comprehensive Testing Techniques for the Measurement of Shrinkage and Structural Changes of Fine-Grained Cement- Based Composites during Ageing. Advances in Materials Science and Engineering, 2017, vol. 2017, no. (2017), p. 1-10. ISSN: 1687-8434.
  Detail | WWW | Full text in the Digital Library

  BÍLEK, V.; ŠIMONOVÁ, H.; HAVLÍKOVÁ, I.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KERŠNER, Z. Alkali Activated Binders Based Concrete Specimens: Length Change and Fracture Tests. In Materials Structure & Micromechnaics of Fracture VIII. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 623-626. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

  CIKRLE, P.; BUREŠ, J.; TOPOLÁŘ, L. Zavádění metrického systému v českých zemích. In Z dějin geodézie a kartografie 18. Mapová díla, zeměměřičské práce, přístroje, osobnosti. Z dějin geodézie a kartografie. Rozpravy Národního technického muzea v Praze. Praha: Národní technické muzeum, 2017. p. 226-237. ISBN: 978-80-7037-262- 3. ISSN: 0232-0916.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; KUCHARCZYKOVÁ, B.; SMUTNÝ, J.; MIKULÁŠEK, K. Using acoustic emission methods to monitor cement composites during setting and hardening. Applied Sciences - Basel, 2017, vol. 7, no. 5:451, p. 1-11. ISSN: 2076-3417.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; PAZDERA, L. The Acoustic Emission Parameters Obtained during Three-point Bending Test on Thermal-stressed Concrete Specimens. In Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Netherlands: Elsevier, 2017. p. 111-117. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  KOCÁB, D.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; PŐSSL, P.; HODULÁKOVÁ, M. Sledování vývoje modulu pružnosti a pevnosti polymer-cementové malty s využitím metody akustické emise. 14. konference TECHNOLOGIE 2017 - Sborník přednášek. Jihlava: Česká betonářská společnost ČSSI, 2017. p. 1-8. ISBN: 978-80-906097-9-2.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; HAVLÍKOVÁ, I.; MATYSÍK, M.; DANĚK, P.; KERŠNER, Z. Evaluation of Three-point Bending Fracture Tests of Selected Concrete: Crack Initiation and Acoustic Emission Parameters. In Solid State Phenomena: 23rd Concrete Days. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 58-63. ISBN: 978-3-0357-1105-9. ISSN: 1012-0394.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; SCHMID, P.; ROVNANÍK, P. Effect of steel fibres dosage in alkali-activated slag mortars on acoustic emission obtained during three-point bending tests. In MATEC Web of Conferences: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. MATEC Web of Conferences. France: EDP Sciences – Web of Conferences, 2017. p. 1-5. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; HODULÁKOVÁ, M.; CHOBOLA, Z.; SEELMANN, H. Flexure response of thermal loaded concrete specimens by acoustic emission method. In MATEC Web of Conferences: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. MATEC Web of Conferences. France: EDP Sciences – Web of Conferences, 2017. p. 1-7. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  KOCÁB, D.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; HODULÁKOVÁ, M.; DANĚK, P. The use of the acoustic emission method for the monitoring of changes in the internal structure of polymer-cement mortars when testing the static compressive modulus of elasticity. In MATEC Web of Conferences: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. MATEC Web of Conferences. France: EDP Sciences – Web of Conferences, 2017. p. 1-7. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; KOCÁB, D.; MISÁK, P.; PAZDERA, L.; HODULÁKOVÁ, M.; KUCHARCZYKOVÁ, B. The Analysis of Acoustic Emission Signals Generated in Cement-based Composites During the Cyclic Loading Test. In Experimental Stress Analysis 2017. první. Košice: Technical University of Košice, Faculty of Mechanical Engineering, 2017. p. 402-407. ISBN: 978-80-553-3167-6.
  Detail

  MISÁK, P.; KOCÁB, D.; DANĚK, P.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L. Experimental assessment of the influence of multiple cyclic loading on the dynamic modulus of elasticity of concrete. In MATEC Web of Conferences: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. MATEC Web of Conferences. France: EDP Sciences – Web of Conferences, 2017. p. 1-5. ISSN: 2261-236X.
  Detail | WWW | Full text in the Digital Library

  MISÁK, P.; DANĚK, P.; KOCÁB, D.; POTOČKOVÁ, M.; MORAVCOVÁ, B.; TOPOLÁŘ, L. Assessment of the Influence of Multiple Cyclic Loading on the Static Modulus of Elasticity of Hardened Concrete. In Solid State Phenomena: 23rd Concrete Days. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 21-24. ISBN: 978-3-0357-1105-9. ISSN: 1012-0394.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; ROVNANÍK, P.; SCHMID, P.; KERŠNER, Z. Effect of graphite filler on crack initiation of alkali- activated slag based composites. Proceedings of the International Conference NON-TRADITIONAL CEMENT & CONCRETE VI. Brno: Brno University of Technology, 2017. p. 52-53. ISBN: 978-80-214-5507- 8.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KOCÁB, D. Vliv vodního součinitele na parametry akustické emise získané při určení statického modulu pružnosti. Czech Journal of Civil Engineering, 2017, vol. 2017, no. 1, p. 58-64. ISSN: 2336-7148.
  Detail | WWW

  KOCÁB, D.; DANĚK, P.; MISÁK, P.; TOPOLÁŘ, L.; PŐSSL, P. Experimental Analysis of the Development of Elastic Properties and Strength under Different Ambient Temperature During the Hardening of Concrete. In CRRB – 18th INTERNATIONAL CONFERENCE ON REHABILITATION AND RECONSTRUCTION OF BUILDINGS. Procedia Engineering. Netherlands: Elsevier, 2017. p. 102-107. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; DVOŘÁK, R.; PAZDERA, L. The Assessment of High-Temperature Degraded Concrete Specimens of Different Mixtures by Acoustic Emission Method during Three-Point Bending Test and Pulse Velocity Method in Comparison with Destructive Tests. In Binders, Materials and Technologies in Modern Construction III. Materials Science Forum. Switzerland: Trans Tech Publications, 2017. p. 88-93. ISBN: 978-3-0357-1157-8. ISSN: 0255-5476.
  Detail | WWW

  DVOŘÁK, R.; HODULÁKOVÁ, M.; TOPOLÁŘ, L. Determination of condition of concrete samples of different mixture degraded by high temperatures by acoustic non-destructive method Impact-echo. In Experimental stress analysis 2017. 1. Košice: Technical University of Kosice, 2017. p. 139-140. ISBN: 978-8-0553-3167-6.
  Detail | WWW

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; SMUTNÝ, J.; PAZDERA, L.; MIKULÁŠEK, K. ANALYSIS OF CONSTRUCTIONAL CONCRETE BY THE ACOUSTIC EMISSION METHOD ON MULTIPLE LOADING. In APPLICATION OF CONTEMPORARY NON-DESTRUCTIVE TESTING IN ENGINEERING. 1. Portorož: Slovenian Society for Non-Destructive Testing, 2017. p. 255-261. ISBN: 978-961-93537-3-8.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; HODULÁKOVÁ, M.; MIKULÁŠEK, K. Evaluation of three point bending test on different fine-grained composites using acoustic emission method. In APPLICATION OF CONTEMPORARY NON-DESTRUCTIVE TESTING IN ENGINEERING. 1. Portorož: Slovenian Society for Non-Destructive Testing, 2017. p. 285-290. ISBN: 978-9-6193-5373-8.
  Detail

  MISÁK, P.; KOCÁB, D.; DANĚK, P.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L. Experimental Study of the Influence of Multiple Cyclic Loading on the Static Modulus of Elasticity of Hardened Concrete. Proceedings 20th International Conference on Composite Structures. Bologna: Societa editrice esculapio, 2017. p. 179-179. ISBN: 978-889-385-041- 4.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; BÍLEK, V., Jr.; KERŠNER, Z. Fracture properties of concrete specimens made from alkali activated binders. In BESTInfra 2017. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2017. p. 1-6. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  PAZDERA, L.; TOPOLÁŘ, L.; HODULÁKOVÁ, M.; MIKULÁŠEK, K.; SMUTNÝ, J. Impact of the heat load of concrete on the propagation of ultrasound waves. In Experimental Stress Analysis 2017. první. Košice: Technical University of Košice, Faculty of Mechanical Engineering, 2017. p. 392-397. ISBN: 978-80-553-3167-6.
  Detail

  ROVNANÍK, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z. Effect of carbon nanotubes on the mechanical fracture properties of alkali-activated materials. In Research and modelling in civil engineering 2017. 1. 2017. p. 37-50. ISBN: 978-83-7365-474-7.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; SEELMANN, H. Non-Linear Characteristics of Temperature Degraded Concrete at High Temperature. In Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Netherlands: Elsevier, 2017. p. 100-105. ISSN: 1877-7058.
  Detail | WWW

  ROVNANÍK, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; KERŠNER, Z. Mechanical Fracture Properties of Alkali-Activated Slag with Graphite Filler. In Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Netherlands: Elsevier, 2017. p. 43-48. ISSN: 1877-7058.
  Detail | WWW

  TOPOLÁŘ, L.; ŠTEFKOVÁ, D.; HODULÁKOVÁ, M. The Assessment of Cement Mortars after Thermal Degradation by Acoustic Non-destructive Methods. In 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017). IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2017. p. 1-7. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  TOPOLÁŘ, L.; PAZDERA, L.; HODULÁKOVÁ, M.; MIKULÁŠEK, K. Selected applications of acoustic methods in building materials monitoring. In Research and Modelling in Civil Engineering 2017. Koszalin: Koszalin University of Technology Publishing House, 2017. p. 63-80. ISBN: 978-83-7365-474-7.
  Detail

  HODULÁKOVÁ, M.; PAZDERA, L.; TOPOLÁŘ, L.; ROTH, O.; OROLÍN, P.; MIKULÁŠEK, K. Pilotní studie chování cyklicky zatěžovaného betonového nosníku metodou akustické emise. In DEFEKTOSKOPIE 2017/ NDE for safety. první. Chomutov: Česká společnost pro nedestruktivní testování, 2017. p. 91-95. ISBN: 978-80-214-5554-2.
  Detail

  KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; DANĚK, P.; KOCÁB, D.; KAREL, O. Comprehensive Monitoring of the Shrinkage and Structural Changes of Cement Composites during Setting and Hardening. In Research and Modelling in Civil Engineering 2017. Koszalin: Koszalin University of Technology Publishing House, 2017. p. 81-98. ISBN: 978-83-7365-474-7.
  Detail

  KOCÁB, D.; BÍLEK, V.; TOPOLÁŘ, L.; DANĚK, P.; KUCHARCZYKOVÁ, B.; PŐSSL, P. Sledování změn v porušování vnitřní struktury alkalicky aktivovaných kompozitů při zkoušce modulu pružnosti. Sborník ke konferenci 24. Betonářské dny 2017. Litomyšl: Česká betonářská společnost ČSSI, 2017. p. 1-8. ISBN: 978-80-906759-0-2.
  Detail

  HALAMOVÁ, R.; TOPOLÁŘ, L.; KOCÁB, D.; HODULÁKOVÁ, M. Vliv velikosti maximálního zrna kameniva na modul pružnosti a parametry akustické emise teplotně namáhaných betonů. 15th Workshop NDT 2017 Non-Destructive Testing in Engineering Practice. 1. Brno: Vysoké učení technické v Brně, 2017. p. 1-6. ISBN: 978-80-214-5592-4.
  Detail

  HODULÁKOVÁ, M.; TOPOLÁŘ, L.; KOCÁB, D.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B. Určení modulů pružnosti u teplotně zatěžovaných betonových těles. 15th Workshop NDT 2017 Non-Destructive Testing in Engineering Practice. 1. Brno: Vysoké učení technické v Brně, 2017. p. 7-15. ISBN: 978-80-214-5592-4.
  Detail

  PAZDERA, L.; DVOŘÁK, R.; HODULÁKOVÁ, M.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; CHOBOLA, Z. Aplication of acoustic emission method and impact echo method to structural rehabilitation. Sanace a rekonstrukce staveb 2017 CRRB - 19th International conference on Rehabilitation and Reconstruction of Building. 1. Praha: České vysoké učení technické v Praze, 2017. p. 108-108. ISBN: 978-80-01-06347-7.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; DANĚK, P.; SMUTNÝ, J.; MIKULÁŠEK, K. Evaluation of Acoustic Emission Events Generated at Three Point Bending of Different Concrete Specimens by Spectral Analysis. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. softcover. Switzerland: Trans Tech Publication, 2017. p. 485-488. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail | WWW

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K. Application acoustic emission method during cyclic loading of concrete beam. NDT Welding Bulletin. Praha: Agentura Tiret, 2017. p. 7-7. ISSN: 1213-3825.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K. Application of acoustic emission method during cyclic loading of concrete beam. In NDT in Progress 2017. 1. Praha: Institute of Thermomechanics AS CR, v.v.i., 2017. p. 51-56. ISBN: 978-8-0870-1263-5.
  Detail | WWW

  KOCÁB, D.; TOPOLÁŘ, L.; BÍLEK, V.; KUCHARCZYKOVÁ, B.; HODULÁKOVÁ, M.; HALAMOVÁ, R. Experimentální analýza vývoje pevnosti v tlaku, modulu pružnosti a parametrů akustické emise alkalicky aktivovaných kompozitů. 14. KONFERENCE SPECIÁLNÍ BETONY - sborník příspěvků. Skalský dvůr: SEKURKON s.r.o., 2017. p. 18-25. ISBN: 978-80-86604-73-2.
  Detail

• 2016

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; PAZDERA, L. The Identification of Cracks Formed during the Spontaneous Drying and Hardening of Alkali- activated Slag for Different Curing Times. In Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines II. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 340-343. ISBN: 978-3-03835-531- 1. ISSN: 1660-9336.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; HAVLÍKOVÁ, I.; ROZSYPALOVÁ, I.; KUCHARCZYKOVÁ, B.; KERŠNER, Z.; BÍLEK, V. Jr. Double-K fracture model parameters of alkali activated binders based concrete specimens. In ESat 2016 ‒ 2nd Int. Conf. on Engineering Sciences and Technologies. první. Košice: Technical University of Košice, Faculty of Civil Engineering, 2016. p. 1-4. ISBN: 978-80-553-2564- 4.
  Detail

  TOPOLÁŘ, L.; TIMČAKOVÁ, K.; MISÁK, P.; PAZDERA, L. Parameters of Acoustic Emission Signals Obtained During the Setting and Hardening of Concrete Mixtures with Different Water- Cement Ratio. In Trends in Statics and Dynamics of Constructions II. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 152-156. ISBN: 978-3-03835-538- 0. ISSN: 1660-9336.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; KERŠNER, Z.; ROVNANÍK, P. Porovnání výsledků nedestruktivních a lomových testů těles z vybraných bezcementových kompozitů. In NDT konference v České republice 2015. Brno: Brno University of Technology and CNDT, 2016. p. 68-77. ISBN: 978-80-214-5315- 9.
  Detail

  TOPOLÁŘ, L.; MISÁK, P.; KOCÁB, D.; MATYSÍK, M. Applying Method of Acoustic Emission for Monitoring of Different Concrete Mixture during Setting and Hardening. In Proceedings from 22nd Czech Concrete Day 2015. Solid State Phenomena. softcover. Switzerland: Trans Tech Publications, 2016. p. 91-95. ISBN: 978-3-03835-675- 2. ISSN: 1662-9779.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; VYMAZAL, T.; DANĚK, P.; SMUTNÝ, J. Three-Point Bending Test Evaluation of Concrete Specimens by Non- Traditional Analysis of Acoustic Emission Method. In Trends in Statics and Dynamics of Constructions II. Applied Mechanics and Materials. softcover. Switzerland: Trans Tech Publications, 2016. p. 198-202. ISBN: 978-3-03835-538- 0. ISSN: 1660-9336.
  Detail

  ŠIMONOVÁ, H.; SCHMID, P.; DANĚK, P.; ROVNANÍK, P.; TOPOLÁŘ, L.; FRANTÍK, P.; KERŠNER, Z.; VESELÝ, V. Vliv tuhosti zkušebního zařízení na stanovení lomových parametrů kompozitu na bázi alkalicky aktivované strusky. In Sborník příspěvků vědecké konference "Spolehlivost konstrukcí & Modelování v mechanice 2016". Ostrava: VŠB-TU Ostrava, Fakulta stavební, 2016. p. 1-6. ISBN: 978-80-248-3917- 2.
  Detail

  ROVNANÍK, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; BAYER, P.; SCHMID, P.; KERŠNER, Z. Carbon nanotube reinforced alkali-activated slag mortars. Construction and building materials, 2016, vol. 119, no. 1, p. 223-229. ISSN: 0950-0618.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; PAŘÍZEK, L.; MIKULÁŠEK, K.; SMUTNÝ, J. Monitoring Micro Defects of Thermally Loaded Specimens Using the Acoustic Emission Method. In 54th international conference on Experimental Stress Analysis. 1. Czech Republic: Copyright © 2016 Department of Mechanics, Faculty of Applied Sciences, University of West Bohemia, 2016. p. 1-4. ISBN: 978-80-261-0624-1.
  Detail

  TOPOLÁŘ, L.; ROVNANÍK, P.; PAZDERA, L. Analysis of Acoustic Emission Signals Generated by Cracks during Three - point Bending Test. In 54th International Conference on Experimental Stress Analysis. 1. Czech Republic: Copyright © 2016 Department of Mechanics, Faculty of Applied Sciences, University of West Bohemia, 2016. p. 1-4. ISBN: 978-80-261-0624-1.
  Detail

  ROVNANÍK, P.; TOPOLÁŘ, L.; FIALOVÁ, B.; MIKHAILOVA, O. Vliv uhlíkových nanotrubiček na vznik mikrotrhlin v popílkovém geopolymeru. In NDT konference v České republice 2015. Brno: Brno University of Technology and CNDT, 2016. p. 1-6. ISBN: 978-80-214-5315- 9.
  Detail

  BÍLEK, V., Jr.; ŠIMONOVÁ, H.; HAVLÍKOVÁ, I.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KERŠNER, Z. Alkali Activated Binders Based Concrete Specimens: Length Change and Fracture Tests. Abstract Booklet of 8th Int. Conf. on Materials Structure & Micromechanics of Fracture, MSMF 8. Brno: Brno University of Technology, 2016. p. 208-208. ISBN: 978-80-214-5357-9.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; HAVLÍKOVÁ, I.; MATYSÍK, M.; DANĚK, P.; LEHKÝ, D.; KERŠNER, Z.; PAZDERA, L. Evaluation of Three-Point Bending Fracture Tests of Selected Concrete: Mechanical Fracture and Acoustic Emission Parameters. Program and book of abstracts 24th Int. Conf. on Materials and Technology. Ljubljana: Inštitut za kovinske materiale in technologie, 2016. p. 111-111. ISBN: 978-961-94088-0- 3.
  Detail

  KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; DANĚK, P.; KOCÁB, D.; KAREL, O.; MISÁK, P. The Volume Changes of Cement Composites in the Early Stage of Setting and Hardening. Program and book of abstracts 24th Int. Conf. on Materials and Technology. Ljubljana, Slovenia: Institute of Metals and Technology, Ljubljana, Slovenia, 2016. p. 108-108. ISBN: 978-961-94088-0- 3.
  Detail | WWW

  KOCÁB, D.; DANĚK, P.; MISÁK, P.; TOPOLÁŘ, L.; PŐSSL, P. Experimental Analysis of the Development of Elastic Properties and Strength under Different Ambient Temperature during the Hardening of Concrete. 18th International Conference on Rehabilitation and Reconstruction of Buildings 2016, CRRB 2016. Brno: WTA CZ, 2016. p. 141-141. ISBN: 978-80-02-02701- 0.
  Detail

  TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; PAZDERA, L. Application of Acoustic Emission on the Characterization of Micro Cracks during Three-point Bending Test on Thermal- stressed Concrete Specimens. SPACE 2016. Košice: Technical University of Košice, 2016. p. 1-2. ISBN: 978-80-553-2643- 6.
  Detail

  ROVNANÍK, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z. Effect of carbon nanotubes on the mechanical fracture properties of fly ash geopolymer. In International Conference on Ecology and new Building materials and products, ICEBMP 2016. Procedia Engineering. Elsevier, 2016. p. 321-328. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  MIKHAILOVA, O.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; ROVNANÍK, P. The Effect of the Organic Additives on the Mechanical Fracture Properties and Shrinkage of Alkali Activated Slag Mortars. 24th International Conference on materials and Technology. Ljubljana, Slovenia: 2016. p. 155-155. ISBN: 978-961-94088-0- 3.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; SEELMANN, H.; ŠIMONOVÁ, H.; CHOBOLA, Z. Monitoring Thermal Loaded Concrete Specimens by Acoustic Emission Method. 24th International Conference on Materials and Technology. Ljubljana, Slovenia: 2016. p. 172-172. ISBN: 978-961-94088-0- 3.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; DANĚK, P.; SMUTNÝ, J.; MIKULÁŠEK, K. Evaluation of Acoustic Emission Events Generated at Three Point Bending of Different Concrete Specimens by Spectral Analysis. 8th International Conference on Materials Structure & Micromechanics of Fracture MSMF8. 1. Brno: Brno University of Technology, 2016. p. 206-206. ISBN: 978-80-214-5357-9.
  Detail

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; DANĚK, P.; TOPOLÁŘ, L.; ROZSYPALOVÁ, I.; FRANTÍK, P.; KERŠNER, Z. Korektní stanovení lomových parametrů betonu. In Proc. of 14th Int. Conf. on New Trends in Statics and Dynamics of Buildings. Bratislava: Slovak University of Technology in Bratislava, 2016. p. 1-7. ISBN: 978-80-227-4613- 7.
  Detail

  ROVNANÍK, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; KERŠNER, Z. Mechanical fracture properties of alkali- activated slag with graphite filler. SPACE 2016. Košice: Technical University of Košice, 2016. p. 1-2. ISBN: 978-80-553-2643- 6.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; MIKULÁŠEK, K.; SMUTNÝ, J.; SEELMANN, H. Wave Response of Temperature Degraded Concrete at Impulse. Structural and Physical Aspects of Construction Engineering. 1. Košice: Slovakia, 2016. p. 319-320. ISBN: 978-80-553-2643- 6.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; TIMČAKOVÁ, K.; ŠTEFKOVÁ, D. The acoustic non- destructive methods and their application to stress situation construction materials. In Advances and Trends in Engineering Sciences and Technologies II. 1. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487- 2742 CRC Press: CRC Press, 2016. p. 291-296. ISBN: 978-1-315-39382- 7.
  Detail | WWW

  ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; TOPOLÁŘ, L.; ROZSYPALOVÁ, I.; KERŠNER, Z. Lomově-mechanické parametry betonu po vystavení vysokým teplotám: pilotní studie. Sborník ke konferenci 23. Betonářské dny 2016. Litomyšl: Česká betonářská společnost ČSSI, 2016. p. 1-6. ISBN: 978-80-906097-6-1.
  Detail

  ŠIMONOVÁ, H.; BÍLEK, V.; DANĚK, P.; TOPOLÁŘ, L.; KERŠNER, Z. Únosnost zkušebních desek z betonu s alkalicky aktivovaným pojivem při pilotním experimentů vakuováním. In Sborník ke konferenci 23. Betonářské dny 2016. Litomyšl: Česká betonářská společnost ČSSI, 2016. p. 1-6. ISBN: 978-80-906097-6- 1.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; HAVLÍKOVÁ, I.; ROZSYPALOVÁ, I.; KUCHARCZYKOVÁ, B.; KERŠNER, Z.; BÍLEK, V. Crack initiation in concrete specimens based on alkali-activate binders. In Advances and Trends in Engineering Sciences and Technologies II. London: Taylor & Francis Group, 2016. p. 267-272. ISBN: 978-1-138-03224-8.
  Detail

  ŠTEFKOVÁ, D.; TIMČAKOVÁ, K.; TOPOLÁŘ, L.; CIKRLE, P. Evaluation of the degree of degradation using the impact-echo method in civil engineering. Materiali in tehnologije, 2016, vol. 50, no. 6, p. 879-884. ISSN: 1580-2949.
  Detail | WWW

  MISÁK, P.; DANĚK, P.; KOCÁB, D.; POTOČKOVÁ, M.; MORAVCOVÁ, B.; TOPOLÁŘ, L. Posouzení vlivu vícenásobného cyklického zatěžování na statický modul pružnosti ztvrdlého betonu. In 23. Betonářské dny 2016. Litomyšl: Česká betonoářská společnost ČSSI, 2016. p. 1-6. ISBN: 978-80-906097-6- 1.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; TIMČAKOVÁ, K. Method of Acoustic Emission and Impact- echo during the Application to Stress Situation Construction Materials. In 2nd International Conference on Engineering Sciences and Technologies. první. Košice: Technical University of Košice, Faculty of Civil Engineering, 2016. p. 1-4. ISBN: 978-80-553-2564- 4.
  Detail

  TOPOLÁŘ, L.; RYPÁK, P.; TIMČAKOVÁ, K.; PAZDERA, L.; ROVNANÍK, P. Non-traditional Non-destructive Testing of the Alkali-activated Slag Mortar during the Hardening. Materiali in tehnologije, 2016, vol. 50, no. 1, p. 7-10. ISSN: 1580-2949.
  Detail | WWW

• 2015

  CARBOL, L.; TOPOLÁŘ, L. Non destructive testing of alkali- activated slag setting with various admixtures. In JUNIORSTAV 2015 - 17. odborná konference doktorského studia. Brno: Vysoké učení technické v Brně, 2015. p. 270-270. ISBN: 978-80-214-5091- 2.
  Detail

  TOPOLÁŘ, L.; TIMČAKOVÁ, K.; MISÁK, P.; PAZDERA, L. VLIV VODNÍHO SOUČINITELE NA VYBRANÉ PARAMETRY SIGNÁLŮ AKUSTICKÉ EMISE ZÍSKANÉ BĚHEM TUHNUTÍ A TVRDNUTÍ BETONOVÝCH SMĚSÍ. In Proceedings of the 13th International Conference on New Trends in Statics and Dynamics of Buildings. 1. Bratislava: Slovak University of Technology in Bratislava, 2015. p. 1-5. ISBN: 978-80-227-4463- 8.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; MISÁK, P. Effect of Concrete Mixture Composition on Acoustic Emission and Fracture Parameters Obtained from Three- point Bending Test. In Binders, Materials and Technologies in Modern Constructions. Advanced Materials Research. 1. Switzerland: Trans Tech Publication, 2015. p. 152-155. ISBN: 978-3-03835-452- 9. ISSN: 1022- 6680.
  Detail

  ROVNANÍKOVÁ, M.; VYŠVAŘIL, M.; HAVLÍKOVÁ, I.; ŠIMONOVÁ, H.; SCHMID, P.; TOPOLÁŘ, L.; KERŠNER, Z. Studium jemnozrnných kompozitů degradovaných kyselinou sírovou s využitím lomových experimentů. In Sborník příspěvků vědecké konference Modelování v mechanice 2015. Ostrava: Vysoká škola báňská − Technická univerzita Otrava, 2015. p. 1-10. ISBN: 978-80-248-3756- 7.
  Detail

  TOPOLÁŘ, L.; ROZSYPALOVÁ, I.; VISZLAY, V.; ŽÁČKOVÁ, L.; DANĚK, P.; ŠIMONOVÁ, H.; PAZDERA, L. Analysis of Acoustic Emission Signals Generated by Cracks Formed During the Spontaneous Drying and Hardening of Alkali- Activated Slag Cured Different Times. In 53rd Conference on Experimental Stress Analysis 2015. 1. Praha, CR: CTU Prague, 2015. p. 446-449. ISBN: 978-80-01-05735- 3.
  Detail

  NĚMEČEK, J.; KERŠNER, Z.; SCHMID, P.; HAVLÍKOVÁ, I.; ŠIMONOVÁ, H.; TOPOLÁŘ, L.; VESELÝ, V.; ROVNANÍK, P. Fracture Process in a Fine – Grained Cement – Based Composite Monitored with Nanoindentation and Acoustic Emission. In Mechanical properties of Materials from Nano to Micro/Meso-Scale. Key Engineering Materials (print). Switzerland: Trans Tech publications, 2015. p. 47-50. ISBN: 978-3-03835-555-7. ISSN: 1013-9826.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Correlation between Parameters of Acoustic Emission and Fracture Characteristics Obtained from Three- point Bending Test. In Ecological and New Building Materials and Products. Advanced Materials Research. 1. Switzerland: Trans Tech Publications, 2015. p. 231-236. ISBN: 978-3-03835-587- 8. ISSN: 1022- 6680.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; TIMČAKOVÁ, K. Nondestructive Testing of Advanced Concrete Structure during Lifetime. Advances in Materials Science and Engineering, 2015, vol. 2015, no. 7, p. 1-5. ISSN: 1687-8434.
  Detail | WWW | Full text in the Digital Library

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L. Experimental Determination of Wheel and Guiding Forces on the Tracks. In EAN 2014 - 52nd International Conference on Experimental Stress Analysis. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, Switzerland, 2015. p. 203-206. ISBN: 978-80-261-0376- 9. ISSN: 1662-7482.
  Detail

  TOPOLÁŘ, L.; MATYSÍK, M.; DANĚK, P.; PAZDERA, L. Evaluation of Three-point Bending Fracture Tests of Selected Concrete – Part II: Results of Acoustic Emission Method. Lisbon: Faculdade de Engenharia da Universidade do Porto, 2015. p. 33-34.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; KOŘENSKÁ, M.; VYMAZAL, T.; SMUTNÝ, J.; BÍLEK, V. Monitoring Early-age Concrete with the Acoustic-emission Method and Determining the Change in the Electrical Properties. Materiali in tehnologije, 2015, vol. 49, no. 5, p. 703-707. ISSN: 1580-2949.
  Detail | WWW

  TOPOLÁŘ, L.; PAZDERA, L. Srovnání alkalicky aktivovaných betonů s různými aktivátory metodou akustické emise. In Defektoskopie 2015, NDE for Safety, sborník příspěvků, procedings, 45. mezinárodní konference, 45th International Conference. 1. Brno: VUT v Brne, 2015. p. 139-144. ISBN: 978-80-214-5280- 0.
  Detail

  ŠIMONOVÁ, H.; BÍLEK, V.; HAVLÍKOVÁ, I.; TOPOLÁŘ, L.; KUCHARCZYKOVÁ, B.; DANĚK, P.; SCHMID, P.; KERŠNER, Z.; PAZDERA, L. Odezva těles z betonů s alkalicky aktivovaným pojivem během lomových testů tříbodovým ohybem a vakuováním. Kobylí, Česká republika: 2015. p. 1-18.
  Detail

  TOPOLÁŘ, L.; MISÁK, P.; KOCÁB, D.; MATYSÍK, M. Použití metody akustické emise pro sledování čerstvých betonů během tuhnutí a tvrdnutí. In 22. konference BETONÁŘSKÉ DNY (2015). Litomyšl: Česká betonářská společnost ČSSI, 2015. p. 1-6. ISBN: 978-80-906097-0- 9.
  Detail

  ŠTEFKOVÁ, D.; TOPOLÁŘ, L. The Impact- Echo Method is Being Used as a Tool to Evaluate Degree of Degradation in Civil Engineering. In NDT for Safety / Defektoskopie 2015. Praha: Vysoké učení technické v Brně se spolupráci s Českou společností pro NDT, 2015. p. 125-132. ISBN: 978-80-214-5280- 0.
  Detail

  TIMČAKOVÁ, K.; TOPOLÁŘ, L.; RYPÁK, P. The influence of Curing and Process of Hydration to Dampling Coefficient of Alkali Activated Slag Mortars. In Binders, Materials and Technologies in Modern Construction. Switzerland: 2015. p. 21-24. ISBN: 978-3-03835-452- 9.
  Detail

  HAVLÍKOVÁ, I.; BÍLEK, V.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; SCHMID, P.; KERŠNER, Z. Modified Cement-based Mortars: Crack Initiation and Volume Changes. Materiali in tehnologije, 2015, vol. 49, no. 4, p. 557-561. ISSN: 1580-2949.
  Detail

  TOPOLÁŘ, L.; TIMČAKOVÁ, K.; MISÁK, P. Influence of Superplasticizer Quantity on Formation of Micro- cracks during Setting and Hardening of Concretes by Acoustic Emission Method. In Ecological and New Building Materials and Products. Advanced Materials Research. 1. Switzerland: Trans Tech Publications, 2015. p. 219-224. ISBN: 978-3-03835-587- 8. ISSN: 1022- 6680.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; MISÁK, P.; DANĚK, P.; KERŠNER, Z.; PAZDERA, L. Influence of Aeration of Concrete on Acoustic Emission and Fracture Mechanical Parameters Obtained from Three- point Bending Tests. In Ecological and New Building Materials and Products. Advanced Materials Research. 1. Switzerland: Trans Tech Publications, 2015. p. 237-242. ISBN: 978-3-03835-587- 8. ISSN: 1022- 6680.
  Detail

  RYPÁK, P.; TOPOLÁŘ, L.; ROVNANÍK, P. Effect of carbon nanotubes and hydroxypropyl methylcellulose on the mechanical properties and cracking tendency of alkali- activated slag. In Binders, Materials and Technologies in Modern Construction. Advanced Materials Research. 2015. p. 25-29. ISBN: 978-3-03835-452- 9. ISSN: 1022- 6680.
  Detail

  BÍLEK, V.; HAVLÍKOVÁ, I.; TOPOLÁŘ, L.; SCHMID, P.; ŠIMONOVÁ, H.; FRANTÍK, P.; KERŠNER, Z. Crack Initiation and Length Change in Modified Alkali Activated Slag Mortars. In CONCREEP-10 Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures. Reston, Virginia: American Society of Civil Engineers, 2015. p. 1109-1118. ISBN: 978-0-7844-7934-6.
  Detail

  ŠIMONOVÁ, H.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z.; ROVNANÍK, P. Effect of Carbon Nanotubes in Metakaolin-based Geopolymer Mortars on fracture toughness parameters and Acoustic Emission Signals. In BRITTLE MATRIX COMPOSITES 11. Warsaw: ZTUREK Research-Scientific Institute, 2015. p. 261-267. ISBN: 978-83-89687-96-8.
  Detail

  ŠIMONOVÁ, H.; HAVLÍKOVÁ, I.; KERŠNER, Z.; SCHMID, P.; TOPOLÁŘ, L.; ROVNANÍK, P. Effect of Carbon Nanotubes in Alkali Activated Slag Mortars on Basic Fracture Parameters Obtained via Double-K Fracture Model. In Brittle Matrix Composites 11. Warsaw: ZTUREK Research-Scientific Institute, 2015. p. 279-288. ISBN: 978-83-89687-96-8.
  Detail

  TOPOLÁŘ, L.; RYPÁK, P.; ŠAMÁRKOVÁ, K.; ROVNANÍK, P. Non-Destructive Testing during the Hardening of Alkali- Activated Slag. In Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines. Applied Mechanics and Materials. 1. Switzerland: Trans Tech Publications, 2015. p. 329-332. ISBN: 978-3-03835-413- 0. ISSN: 1660- 9336.
  Detail

• 2014

  PAZDERA, L.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; FOJTŮ, P.; SMUTNÝ, J.; HAVLÍKOVÁ, I.; KERŠNER, Z.; RODRIGUEZOVÁ, V. Determine Parameters for Double-K Model at Three- Point Bending by Application of Acoustic Emission Method. In 51st Annual of the International Scientific Conference on Experimental Stress Analysis, EAN 2013. Applied Mechanics and Materials. 1. Switzerland: 2014. p. 151-156. ISBN: 978-3-03785-977- 3. ISSN: 1660- 9336.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J. Measurement of Wheel and Guiding Forces on the Tracks. In EAN 2014. Mariánské Lázně, Česká republika: 2014. p. 1-7. ISBN: 978-80-261-0376- 9.
  Detail

  KOŘENSKÁ, M.; MANYCHOVÁ, M.; PAZDERA, L.; TOPOLÁŘ, L. Monitoring of the damage in stone blocks by means of non-destructive methods. Key Engineering Materials (print), 2014, vol. 592-593, no. 1, p. 545-548. ISSN: 1013-9826.
  Detail

  MATYSÍK, M.; TOPOLÁŘ, L.; DANĚK, P.; VYMAZAL, T.; PLŠKOVÁ, I. The Effect of Concrete Quality on the Acoustic Emission Parameters During Three-point Bending Fracture Test. In 11th International Conference Binders and Materials 2013 (ICBM 2013). Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 149-152. ISBN: 978-3-03835-026-2. ISSN: 1022-6680.
  Detail

  PERTOLD, Z.; ŠACHLOVÁ, Š.; ŠŤASTNÁ, A.; BÍLEK, V.; KRUTILOVÁ, K.; BÍLEK, V.; TOPOLÁŘ, L. Alkalicko- křemičitá reakce v České republice a možnosti její eliminace. Beton TKS, 2014, vol. 14, no. 2, p. 34-41. ISSN: 1213- 3116.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L. Application Acoustic Emission Method during Concrete Frost Resistance. RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2014, vol. 2014(50), no. 2, p. 127-131. ISSN: 1061-8309.
  Detail

  ROVNANÍK, P.; BAYER, P.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; SCHMID, P. EFFECT OF CARBON NANOTUBES ON THE MECHANICAL FRACTURE PARAMETERS AND MICROSTRUCTURE OF ALKALI ACTIVATED SLAG MORTARS. In Non-Traditional Cement & Concrete V. Brno: Vysoké učení technické v Brně, 2014. p. 179-182. ISBN: 978-80-214-4867- 4.
  Detail

  BÍLEK, V.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; HAVLÍKOVÁ, I.; PAZDERA, L.; KERŠNER, Z. Pilot Study of the Effect of Admixtures in Fine-grained Cement-based Composites on Volume Changes and Fracture Parameters. In Structural and Physical Aspects of Civil Engineering. Advanced Materials Research. 1. Switzerland: Trans Tech Publications, 2014. p. 294-297. ISBN: 978-3-03835-147-4. ISSN: 1022-6680.
  Detail

  ROVNANÍK, P.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z. Effect of Spontaneous Drying on Mechanical Parameters of Alkali- Activated Slag Mortar. In 2nd International Conference on Structural and Physical Aspects of Civil Engineering, SPACE 2013. Advanced Materials Research. 2014. p. 144-147. ISBN: 978-3-03835-147- 4. ISSN: 1022- 6680.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Acoustic Emission in Protected and Non-Protected Concrete During the First 24 Hours. In Architecture, Building Materials and Engineering Management IV. Applied Mechanics and Materials. 1. Switzerland: 2014. p. 1149-1152. ISBN: 978-3-03835-164-1. ISSN: 1660-9336.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; ROVNANÍK, P.; SCHMID, P. The Effect of the Carbon Nanotubes on the Mechanical Fracture Parameters and Acoustic Emission Signals of Alkali Activated Slag Mortar. In Proc. of the 6 th Int. Conf. on Dynamics of Civil Engineering and Transport Structures and Wind Engineering. Žilina: EDIS publishing house University of Zilina, 2014. p. 315-319. ISBN: 978-80-554-0844- 6.
  Detail

  TOPOLÁŘ, L. Quantification of Micro- cracks by Acoustic Emission Method during Setting and Hardening of Concrete. In Ecology and New Building Materials and Products. Advanced Materials Research. 1. Switzerland: Trans Tech Publications, 2014. p. 199-202. ISBN: 978-3-03835-188- 7. ISSN: 1022- 6680.
  Detail

  MATYSÍK, M.; TOPOLÁŘ, L.; DANĚK, P.; ŠIMONOVÁ, H.; VYMAZAL, T.; PLŠKOVÁ, I. An Experimental Study on Acoustic Emission Signals During the Three- point Bending Fracture Test. In ICEBMP 2014. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 281-284. ISBN: 978-80-87397-16- 9. ISSN: 1022- 6680.
  Detail

  TOPOLÁŘ, L.; ŠIMONOVÁ, H.; ROVNANÍK, P.; SCHMID, P. The Effect of the Carbon Nanotubes on the Mechanical Fracture Properties of Alkali Activated Slag Mortars. In Dynamic of Civil Engineering and Transport Structures and Wind Engineering. Applied Mechanics and Materials. 1. Switzerland: Trans tech Publication, 2014. p. 243-246. ISBN: 978-3-03835-197-9. ISSN: 1660-9336.
  Detail

  TOPOLÁŘ, L.; RYPÁK, P.; MIKHAILOVA, O.; ROVNANÍK, P. Advanced Analysis of Acoustic Emission Signals Generated by Cracks during the Hardening of Alkali- activated Slag. In INTERNATIONAL CONFERENCE EXPERIMENTAL STRESS ANALYSIS 2014. 1. Česká republika: Výzkumný a zkušební ústav s.r.o., 2014. p. 159-162. ISBN: 978-80-261-0376- 9.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; KOŘENSKÁ, M.; SMUTNÝ, J.; KUSÁK, I.; LUŇÁK, M. Application Acoustic Emission Method and Impedance Spectroscopy for Monitoring Concrete During Hardening. In Ecology and New Building Materials and Products. Advanced Materials Research. 1. Switzerland: Trans Tech Publications INC., 2014. p. 257-260. ISBN: 978-80-87397-16- 9. ISSN: 1022- 6680.
  Detail

  ROVNANÍK, P.; BAYER, P.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; SCHMID, P. EFFECT OF CARBON NANOTUBES ON THE MECHANICAL FRACTURE PARAMETERS AND MICROSTRUCTURE OF ALKALI ACTIVATED SLAG MORTARS. International Journal of Research in Engineering and Technology, 2014, vol. 3, no. 13, p. 52-56. ISSN: 2321- 7308.
  Detail | WWW

  TOPOLÁŘ, L.; PAZDERA, L. SLEDOVÁNÍ TUHNUTÍ A TVRDNUTÍ BETONU POMOCÍ METODY AKUSTICKÉ EMISE S VYUŽITÍM VLNOVODŮ. In Trvanlivost 2014. 1. 2014. p. 18-24. ISBN: 978-80-214-5075- 2.
  Detail

  HAVLÍKOVÁ, I.; BÍLEK, V.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; KERŠNER, Z. Modified Fine-grain Cement-based Composite Specimens: Crack Initiation and Volume Changes. 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY Program and book of abstracts. Ljubljana: Institute of Metals and Technology, Ljubljana, Slovenia, 2014. p. 91-91. ISBN: 978-961-92518-7- 4.
  Detail

  KOŘENSKÁ, M.; PAZDERA, L.; MANYCHOVÁ, M.; TOPOLÁŘ, L. Experimental Study of the Potential Usage of Acoustic Emission to Railway Track Faults detection. In 11th European Conference on NDT. 1. Brno: Brno University of technology, 2014. p. 1-7. ISBN: 978-80-214-5018- 9.
  Detail

  KOŘENSKÁ, M.; PAZDERA, L.; TOPOLÁŘ, L.; MANYCHOVÁ, M. Výzkum použitelnosti metody akustické emise pro diagnostiku železničních výhybek. In 44. mezinárodní konference Defektoskopie 2014. 1. Praha: Betis, s.r.o., 2014. p. 51-57. ISBN: 978-80-214-5035- 6.
  Detail

  CARBOL, L.; MARTINEK, J.; TOPOLÁŘ, L. Multi-method measurement of alkali- activated slag setting with various admixtures. In 12th WORKSHOP NDT 2014 NON- DESTRUCTIVE TESTING IN ENGINEERING PRACTICE. Brno: CERM, 2014. p. 1-6. ISBN: 978-80-214-5099- 8.
  Detail

  TIMČAKOVÁ, K.; TOPOLÁŘ, L.; ŠTEFKOVÁ, D. Verification of Influence of Curing and Process of Hydration by Damping Coefficient and Loss in Weight. In 12th WORKSHOP NDT 2014 - NON- DESTRUCTIVE TESTING IN ENGINEERING PRACTICE. Brno: Brno University of Technology, 2014. p. 60-64. ISBN: 978-80-214-5099- 8.
  Detail

  TIMČAKOVÁ, K.; TOPOLÁŘ, L.; RYPÁK, P. The Influence of Curing and Process of Hydration to Damping Coefficient of Alkali Activated Slag Mortars. In Briders, Materials and Technologies in Modern Construction. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 21-24. ISBN: 978-3-03835-452- 9. ISSN: 1022- 6680.
  Detail

  NĚMEČEK, J.; KERŠNER, Z.; VESELÝ, V.; SCHMID, P.; ŠIMONOVÁ, H.; TOPOLÁŘ, L. Fracture Process zone in a fine-grained cement- based composite monitored with nanoindentation and acoustic emission. Local Mechanics Properties. Stará Lesná, Slovenská republika: 2014. p. 26-26. ISBN: 978-80-970964-9- 6.
  Detail

  HAVLÍKOVÁ, I.; BÍLEK, V.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; KERŠNER, Z. Crack Initiation and Volume Changes in Modified Fine-Grain Cement- Based Composite Specimens. Luasanne, Switzerland: 2014. p. 1 (1 s.).
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; CIKRLE, P. Acoustic Emission Monitoring during Static Modulus Elasticity Test of Concrete Specimen. In 51st Annual of the International Scientific Conference on Experimental Stress Analysis, EAN 2013;. Applied Mechanics and Materials. 1. Switzerland: 2014. p. 267-272. ISBN: 978-3-03785-977- 3. ISSN: 1660- 9336.
  Detail

• 2013

  KOŘENSKÁ, M.; PAZDERA, L.; TOPOLÁŘ, L.; MANYCHOVÁ, M.; RODRIGUEZOVÁ, V.; JANKŮ, M. Experimentální výzkum využití akustické emise pro testování kolejnic za provozu. In 43. mezinárodní konference Defektoskopie 2013 / NDE for Safety. 1. Praha: Betis, s.r.o., 2013. p. 71-76. ISBN: 978-80-214-4799- 8.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; FOJTŮ, P.; SMUTNÝ, J.; HAVLÍKOVÁ, I.; RODRIGUEZOVÁ, V. Acoustic Emission Method Application at Three-Point Bending to Determine Parameters for Double- K Model. In 51th International Conference on Experimental Stress Analysis. 1. Litoměřice: Česká společnost pro mechaniku a Fakulta výrobních technologií a managementu, 2013. p. 1-6. ISBN: 978-80-7414-579- 7.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; CIKRLE, P. Acoustic Emission Monitoring during Static Modulus Elasticity Test of Concrete Specimen. In 51th International Conference on Experimental Stress Analysis. 1. Litoměřice: Česká společnost pro mechaniku a Fakulta výrobních technologií a managementu, 2013. p. 1-6. ISBN: 978-303785977- 3.
  Detail

  TOPOLÁŘ, L.; ROVNANÍK, P. STUDIUM TVORBY TRHLIN PŘI TUHNUTÍ ALKALICKY AKTIVOVANÉ STRUSKY POMOCÍ AKUSTICKÉ EMISE. In Alternativní stavební pojiva. Brno: VUT v Brně, 2013. p. 61-68. ISBN: 978-80-214-4773- 8.
  Detail

  ŠAMÁRKOVÁ, K.; ŠTEFKOVÁ, D.; TOPOLÁŘ, L.; PAZDERA, L. Monitorování cementových past během její životnosti pomocí metody akustické emise a Impact- Echo metody s použitím vlnovodů. In NDE for Safety/ Defektoskopie 2013 sborník příspěvků. Olomouc: Vysoké učení technické v Brně ve spolupráci s Českou společností pro NDT, 2013. p. 199-204. ISBN: 978-80-214-4799- 8.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLEK, V.; KOŘENSKÁ, M.; RODRIGUEZOVÁ, V. Prediction of Behaviour of Concrete Mixture Using Acoustic Emission Method. In Dwfwktoskopie 2013, NDT for Saferty, 43. International Conference. 1. Praha, CR: Betis s.r.o., 2013. p. 125-128. ISBN: 978-80-214-4799- 8.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; KOŘENSKÁ, M.; MANYCHOVÁ, M.; SMUTNÝ, J.; VLAŠIC, F. Equipment for using acoustic emission method in civil engineering. In Non- Destructive Testing 2013. Brno, Česká republika: 2013. p. 50-54. ISBN: 978-80-7204-864- 9.
  Detail

  TOPOLÁŘ, L.; BÍLEK, V.; PAZDERA, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; HAVLÍKOVÁ, I.; KERŠNER, Z. Predikce iniciace lomu jemnozrnných cementových kompozitů s příměsemi pomocí měření akustické emise. In Dwfwktoskopie 2013, NDT for Saferty, 43. International Conference. 1. Praha, CR: Betis s.r.o., 2013. p. 191-198. ISBN: 978-80-214-4799- 8.
  Detail

  BÍLEK, V.; TOPOLÁŘ, L.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; HAVLÍKOVÁ, I.; PAZDERA, L.; KERŠNER, Z. Pilotní studie vlivu příměsí u jemnozrnných cementových kompozitů na objemové změny a mechanické parametry. In Structural and Physical Aspects of Civil Engineering, 2013. Slovensko: 2013. p. 1-12. ISBN: 978-80-553-1488- 4.
  Detail

  FICKER, T.; TOPOLÁŘ, L.; KUSÁK, I. Is componential strength analysis of concrete possible?. MAGAZINE OF CONCRETE RESEARCH, 2013, vol. 65, no. 24, p. 1480-1485. ISSN: 0024- 9831.
  Detail

  BÍLEK, V.; BÍLEK, V.; TOPOLÁŘ, L.; PAZDERA, L. Omezení rizika alkalicko- křemičité reakce prostřednitcvím příměsí. In 11. konference TECHNOLOGIE BETONU 2013: Sborník příspěvků. Jihlava: 2013. p. 36-40. ISBN: 978-80-87158-33- 3.
  Detail

  MANYCHOVÁ, M.; KOŘENSKÁ, M.; PAZDERA, L.; TOPOLÁŘ, L.; JANKŮ, M. Počáteční výzkum použitelnosti akustických metod pro detekci defektů na bezstykových kolejových tratích. In 43. mezinárodní konference Defektoskopie 2013 / NDE for Safety. 1. Praha: Betis, s.r.o., 2013. p. 87-92. ISBN: 978-80-214-4799- 8.
  Detail

  TOPOLÁŘ, L.; ŠTEFKOVÁ, D.; CARBOL, L.; PAZDERA, L. Study of the Acoustic Emission and Temperature Characteristics of Concrete Hardening Process with Different Curing Way. In 11th WORKSHOP NDT 2013 NON- DESTRUCTIVE TESTING IN ENGINEERING PRACTICE. Brno: AKADEMICKÉ NAKLADATELSTVÍ CERM,s.r.o., 2013. p. 61-66. ISBN: 978-80-7204-864- 9.
  Detail

  ROVNANÍK, P.; TOPOLÁŘ, L.; SCHMID, P.; KERŠNER, Z. Vliv podmínek vysychání zkušebních těles na mechanické parametry jemnozrnného kompozitu na bázi alkalicky aktivované strusky. In Structural and Physical Aspects of Civil Engineering. 1. Košice: Technical University of Košice, 2013. p. 1-5. ISBN: 978-80-553-1488- 4.
  Detail

• 2012

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; RODRIGUEZOVÁ, V. Modulus of Elasticity Determination from Cantilever Deflection. In Proc. of the 50th Annual Conference on Experimental tress Analysis. 1. Praha: CTU Praha, 2012. p. 313-320. ISBN: 978-80-01-05060- 6.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; BÍLEK, V.; TIMČAKOVÁ, K. MONITORING CONCRETE LIFETIME BY MEANS OF ACOUSTIC EMISSION AND IMPACT ECHO METHODS. In 8th CCC. 1. Croatia: Print & Bound, 2012. p. 241-246. ISBN: 978-953-7621-14- 8.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; BÍLEK, V. Non Destructive Testing as Tool for Monitoring Concrete Behaviour Non Destructive Testing as Tool for Monitoring Concrete Behaviour at Hardening and Setting. In 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission University of Granada, 12- 15 September 2012. 1. Granada, Spanelsko: EWGAE, 2012. p. 1-6. ISBN: 978-84-615-9941- 7.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; BÍLEK, V.; RODRIGUEZOVÁ, V.; KOŘENSKÁ, M. Crack Detection of Concrete Slab made from Different Concrete Mixtures by Acoustic Emission Method. In 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission University of Granada, 12- 15 September 2012. 1. Granada, Spanelsko: EWGAE, 2012. p. 1-6. ISBN: 978-84-615-9941- 7.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; SMUTNÝ, J.; BÍLEK, V.; ŠAMÁRKOVÁ, K. Monitoring Concrete Lifetime by Means of Acoustic Emission and Impact Echo Methods. In Proceedings of the 8th Central European Congresses on Concrete Engineering. Croatia: Tiskara Velika Goric, 2012. p. 241-246. ISBN: 978-953-7621-15- 5.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J.; BÍLEK, V.; ŠAMÁRKOVÁ, K.; KUSÁK, I.; LUŇÁK, M.; KERŠNER, Z.; KOŘENSKÁ, M.; RODRIGUEZOVÁ, V. Dielectric Properties of Concrete Mixtures During Concrete Hardening. In Proceedings of the 8th Central European Congresses on Concrete Engineering. Croatia: Tiskara Velika Goric, 2012. p. 337-342. ISBN: 978-953-7621-15- 5.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; SMUTNÝ, J. Application of Acoustic Emission Method During Setting ond Hardening Concrete in Timber And Metal Mould. In 42. mezinárodní konference a výstava NDT techniky, Defektoskopie 2012 / NDE for Safety 2012. 1. Praha: Betis, 2012. p. 189-194. ISBN: 978-80-214-4609- 0.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; SMUTNÝ, J.; BÍLEK, V.; DĚDEČKOVÁ, L. Monitoring Four Point Bending of Concrete Beam by Acoustic Emission Method. In 42. mezinárodní konference a výstava NDT techniky, Defektoskopie 2012 / NDE for Safety 2012. 1. Praha: Betis, 2012. p. 263-270. ISBN: 978-80-214-4609- 0.
  Detail

  NOHÁL, L.; MAZAL, P.; TOPOLÁŘ, L.; PAZDERA, L. Metoda akustické emise v hodnocení kvality odporového bodového svařování. In NDE for Safety / Defektoskopie 2012, 42. mezinárodní konference - sborník příspěvků. 2012. Brno: VUT v Brně; ČNDT, 2012. p. 319-324. ISBN: 978-80-214-4609- 0.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; SMUTNÝ, J. Hodnocení chování betonu při tuhnutí a tvrdnutí netradičními metodami. 1. 1. Praha: BETIS s.r.o. Praha, 2012. 76 p. ISBN: 978-80-214-4642- 7.
  Detail

  MAZAL, P.; PAZDERA, L.; NOHÁL, L.; TOPOLÁŘ, L. Netradiční aplikace metody akustické emise. 2012. 2012. Brno: VUT v Brně, 2012. 102 p. ISBN: 978-80-214-4629- 8.
  Detail

  ŠAMÁRKOVÁ, K.; TOPOLÁŘ, L.; PAZDERA, L. Monitoring cement mortar lifetime by means of impact- echo and acoustic emission methods. In 10 th International Conference NDT 2012 Non- Destructive Testing in Engineering Practice. 1. Brno: AKADEMICKÉ NAKLADATELSTVÍ CERM, s.r.o., 2012. p. 112-118. ISBN: 978-80-7204-823- 6.
  Detail

  ŠAMÁRKOVÁ, K.; TOPOLÁŘ, L.; PAZDERA, L. Exploring the possibilities the application of waveguides when measured by impact- echo method and method of acoustic emission. In 10 th International Conference NDT 2012 Non- Destructive Testing in Engineering Practice. 1. Brno: AKADEMICKÉ NAKLADATELSTVÍ CERM, s.r.o., 2012. p. 105-111. ISBN: 978-80-7204-823- 6.
  Detail

  CHOBOLA, Z.; PAZDERA, L.; KOŘENSKÁ, M.; TOPOLÁŘ, L. Měření integrity vzorků z Karlova mostu. Brno: 2012. p. 1-35.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V.; DĚDEČKOVÁ, L. Acoustic Emission Method Applied on Four Point Loading of Concrete Structures with and without Small Wires. In Proc. of the 50th Annual Conference on Experimental tress Analysis. 1. Praha: CTU Praha, 2012. p. 477-484. ISBN: 978-80-01-05060- 6.
  Detail

• 2011

  MAZAL, P.; PAZDERA, L.; NOHÁL, L.; TOPOLÁŘ, L.; GRUM, J. ACOUSTIC EMISSION IN QUALITY CONTROL OF MATERIALS AND PROCESSES MONITORING. 1. 1. Ljubljana, Slovenija: University of Ljubljana, 2011. 60 p. ISBN: 978-961-90610-8- 4.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; SMUTNÝ, J.; MATYSÍK, M.; RODRIGUEZOVÁ, V.; BÍLEK, V. Temperature Measurement of Railway Sleeper Surface and Inside during Hardening. In Proceedings on 9th International Conference NDT 2011. Brno: Brno University of Technology, 2011. p. 85-92. ISBN: 978-80-7204-774- 1.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; BÍLEK, V.; SMUTNÝ, J.; KUSÁK, I.; LUŇÁK, M.; KOŘENSKÁ, M.; MATYSÍK, M.; MAZAL, P. Acoustic emission and non linear ultrasonic spectroscopy at concrete hardening. NDT Welding Bulletin, 2011, vol. 21, no. 1, p. 18-21. ISSN: 1213- 3825.
  Detail

• 2010

  KUSÁK, I.; LUŇÁK, M.; PAZDERA, L.; TOPOLÁŘ, L.; BÍLEK, V. Long- Term Monitoring of Hydration and Concrete Curing Using Methods of Impedance Spectroscopy. In proc. of. 40th International Conference - Defektoskopie. 1. Plzen, CR: BETIS s.r. o, 2010. p. 149-156. ISBN: 978-80-214-4182- 8.
  Detail

  KUSÁK, I.; LUŇÁK, M.; MATYSÍK, M.; TOPOLÁŘ, L. Stanovení topného faktoru tepelného čerpadla. Media4u Magazine, 2010, vol. 7, no. 1/ 2010, p. 78-82. ISSN: 1214- 9187.
  Detail

  PAZDERA, L.; BÍLEK, V.; SMUTNÝ, J.; TOPOLÁŘ, L. Application of nonlinear techniques at concrete hardening. Otranto, Italie: Los Alamos National Security, 2010. p. 0 (1 s.).
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLEK, V. Study of the Temperature and Acoustic Emission Characteristics of the Concrete Hardening Process with Different Ways of Curing. TRANSACTIONS ON TRANSPORT SCIENCES, 2010, vol. 2009(2), no. 3, p. 134-139. ISSN: 1802- 971X.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; KOŘENSKÁ, M.; BÍLEK, V. Non Destructive Testing during Concrete Hardening. NDT Welding Bulletin, 2010, vol. 2010, no. special, p. 18-21. ISSN: 1213- 3825.
  Detail

• 2008

  PLŠKOVÁ, I.; KUCHARCZYKOVÁ, B.; PAZDERA, L.; TOPOLÁŘ, L. Využití akustické emise při testování trámců z lehkého betonu s různými typy vláken. In Proceedings of 6th WORKSHOP NDT 2008. 1. Brno: Brno University of Technology, 2008. p. 102-105. ISBN: 978-80-7204-610- 2.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Použití akustické emise při pozorování vývoje mikrotrhlin během tuhnutí a zrání cementové a bezcementové směsii. The e- Journal of Nondestructive Testing, 2008, vol. 2008, no. 1, p. 210-213. ISSN: 1435- 4934.
  Detail

  KUSÁK, I.; LUŇÁK, M.; TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V. Sledování hydratace betonu impedanční spektroskopií. The e- Journal of Nondestructive Testing, 2008, vol. 2008, no. 1, p. 123-128. ISSN: 1435- 4934.
  Detail

• 2007

  BÍLEK, V.; PAZDERA, L.; TOPOLÁŘ, L. Studium vývoje mikrotrhlin během tuhnutí a zrání betonu prostřednictvím akustické emise. In 6. konference Technologie betonu, Technologie, provádění a kontrola betonových konstrukcí. sbornik. Pardubice: CBS, 2007. p. 72-76. ISBN: 978-80-903807-4- 5.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Použití ultrazvuku pro nedestruktivní zjištění dynamických modulů pružnosti betonů - teorie. In 5th worksop NDT 2007. 1. Brno: CERM, 2007. p. 210-213. ISBN: 978-80-7204-549- 5.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLKOVÁ, J.; KUSÁK, I.; LUŇÁK, M.; MARTINEK, J. Using Fourier Transform to 1/ f noise analysis of electric components. In Physical and Material Engineering 2007, International Workshop. Brno: CERM, 2007. p. 169-172. ISBN: 978-80-7204-537- 2.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; KOŘENSKÁ, M.; BÍLKOVÁ, J.; KUSÁK, I.; LUŇÁK, M.; MARTINEK, J.; TOPOLÁŘ, L. Discrete Fourier Transform at Non- Linear Spectroscopy. In Physical and Material Engineering 2007, International Workshop. Brno: CERM, 2007. p. 173-176. ISBN: 978-80-7204-537- 2.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLKOVÁ, J.; KUSÁK, I.; LUŇÁK, M.; MARTINEK, J. Computing signal Envelope by RainFlow Method. In Physical and Material Engineering 2007, International Workshop. Brno: CERM, 2007. p. 177-180. ISBN: 978-80-7204-537- 2.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLKOVÁ, J.; MARTINEK, J. Hilbert Transform as a Power Tool to Damping Analyse of Impulse Signal (theory). In Physical and Material Engineering 2007, International Workshop. Brno: CERM, 2007. p. 181-184. ISBN: 978-80-7204-537- 2.
  Detail

  TOPOLÁŘ, L. Experimental determination of soundproof building element in simple exercise. In Physical and Material Engineering 2007. Brno: Cerm, 2007. p. 216-217. ISBN: 978-80-7204-537- 2.
  Detail

  TOPOLÁŘ, L. Sledování teploty při tuhnutí betonových pražců. In sbornik. Brno: VUTIM, 2007. p. 250-255. ISBN: 978-80-214-3337- 3.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; KOŘENSKÁ, M.; BÍLEK, V.; TOPOLÁŘ, L.; MARTINEK, J.; LUŇÁK, M.; KUSÁK, I. Využití metod nedestruktivního testování pro sledování betonu při tuhnutí. In Defektoskopie 2007. Praha: BETIS, 2007. p. 173-176. ISBN: 978-80-214-3504- 9.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; KOŘENSKÁ, M.; BÍLEK, V.; TOPOLÁŘ, L.; MARTINEK, J.; LUŇÁK, M.; KUSÁK, I. Diskrétní Fourierova transformace při nelineární ultrazvukové spektroskopii. In Defektoskopie 2007. Praha: BETIS, 2007. p. 177-182. ISBN: 978-80-214-3504- 9.
  Detail

  KUSÁK, I.; LUŇÁK, M.; TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V. Sledování hydratace betonu impedanční spektroskopií. In Defektoskopie 2007. Praha: BETIS, 2007. p. 123-128. ISBN: 978-80-214-3504- 9.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; LUŇÁK, M.; KUSÁK, I.; BÍLEK, V. Study on the Acoustic Emission Characteristics of Hardening Process of Concrete with Different Plasticizers. In sbornik. Brno: Novotny, 2007. p. 118-121. ISBN: 978-80-7355-078- 3.
  Detail

  PAZDERA, L.; TOPOLÁŘ, L.; KUSÁK, I.; LUŇÁK, M.; BÍLEK, V. Elektrické charakteristiky pražcových betonů s rozlišným složením vody. In řth worksop NDT 2007. 1. Brno: CERM, 2007. p. 102-105. ISBN: 978-80-7204-549- 5.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V. Použití ultrazvuku pro nedestruktivní zjištění dynamických modulů pružnosti betonů - experiment. In řth worksop NDT 2007. 1. Brno: CERM, 2007. p. 220-223. ISBN: 978-80-7204-549- 5.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Použití akustické emise při pozorování vývoje mikrotrhlin během tuhnutí a zrání cementové a bezcementové směsi. In řth worksop NDT 2007. 1. Brno: CERM, 2007. p. 210-213. ISBN: 978-80-7204-549- 5.
  Detail

  MARTINEK, J.; TOPOLÁŘ, L. Přednáškový experiment Brachistochrona pro studenty prvního ročníku VŠ. In 50 let didaktiky fyziky v ČR. 2007. p. 183-187.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Laboratorní určení neprůzvučnosti stavebních prvků - úloha pro SŠ a VŠ technického směru. In 50 let didaktiky fyziky v ČR. 1. lomouc: UP Olomouc, 2007. p. 202-205. ISBN: 978-80-244-1786- 8.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L. Použití akustické emise při pozorování vývoje mikrotrhlin během tuhnutí a zrání betonových směsí. In Defektoskopie 2007. Praha: BETIS, 2007. p. 257-262. ISBN: 978-80-214-3504- 9.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; TOPOLÁŘ, L.; BÍLKOVÁ, J.; KUSÁK, I.; LUŇÁK, M. Assessment and Management of Reduction Environmental Noise European Union. In Physical and Material Engineering 2007, International Workshop. Brno: CERM, 2007. p. 165-168. ISBN: 978-80-7204-537- 2.
  Detail

• 2006

  TOPOLÁŘ, L. Heat and temperature in concrete. In Physical and material engineering 2006. Bratislava: Bratislava, 2006. p. 100-103. ISBN: 80-214-3112- 1.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; KOŘENSKÁ, M.; TOPOLÁŘ, L.; BÍLEK, V.; BÍLKOVÁ, J. Temperature History at Concrete Setting. In sbornik. Bratislava: VEGA, 2006. p. 202-205. ISBN: 80-227-2467- X.
  Detail

  TOPOLÁŘ, L. VYUŽITÍ MĚŘÍCÍCH METOD VYUŽÍVAJÍCÍCH MECHANICKÉHO VLNĚNÍ PRO URČENÍ CHOVÁNÍ STAVEBNÍCH MATERIÁLŮ. In Juniorstav 2006. 1. Brno: VUT, 2006. p. 145-151. ISBN: 80-214-3112- 1.
  Detail

  TOPOLÁŘ, L.; GLOSEROVÁ, L. DYN - X TECHNOLOGIE A JEJÍ MOŽNÉ VYUŽITÍ PŘI NEDESTRUKTIVNÍM TESTOVÁNÍ STAVEBNÍCH MATERIÁLŮ. In Workshop NDT 2006. Brno: VUTIM, 2006. p. 219-221. ISBN: 80-7204-487- 7.
  Detail

  KUSÁK, I.; PAZDERA, L.; TOPOLÁŘ, L. Aplikace metody akustické emise (AE) na vzorky cementového tmele. In Workshop NDT 2006. Brno: VUTIM, 2006. p. 93-97. ISBN: 80-7204-487- 7.
  Detail

  TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V. Nedestruktivní měření betonu při tuhnutí pomocí metody akustické emise. In Workshop NDT 2006. Brno: CET, 2006. p. 216-218. ISBN: 80-7204-487- 7.
  Detail

  TOPOLÁŘ, L. Využití měřících metod využívajících mechanického vlnění pro určení chování stavebních materiálů. In Juniorstav 2006. Brno: VUTIM, 2006. p. 145-150. ISBN: 80-214-3112- 1.
  Detail

• 2005

  PAZDERA, L.; KOŘENSKÁ, M.; TOPOLÁŘ, L.; VYROUBAL, P. MĚŘENÍ VLIVU OCHRANY ŽELEZOBETONU PROTI KOROZI OCELOVÉ. In WORKSHOP NDT 2005. 1. Brno: VUTIM, 2005. p. 106-110. ISBN: 80-7204-420- 6.
  Detail

  TOPOLÁŘ, L., PAZDERA, L. DŮLEŽITÉ PRVKY APARATURY PRO URČENÍ LINEARITY ČI NELINEARITY CHOVÁNÍ STAVEBNÍ KONSTRUKCE SNÍMAČE SÍLY. In WORKSHOP NDT 2005 NON- DESTRUCTIVE TESTING IN ENGINEERING PRACTICE. Brno: VUTIM, 2005. p. 206-211. ISBN: 80-7204-420- 6.
  Detail

  PAZDERA, L.; SMUTNÝ, J.; KOŘENSKÁ, M.; TOPOLÁŘ, L. VYUŽITÍ VLNKOVÉ TRANSFORMACE PŘI VÝZKUMU VE STAVEBNICTVÍ. In WORKSHOP NDT 2005. Brno: VUTIM, 2005. p. 110-113. ISBN: 80-7204-420- 6.
  Detail

*) Publications are generated once a 24 hours.