Publications

• 2022

  RESL, O.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; RAUDENSKÝ, M. Influence of Porous Oxide Layer on Water Spray Cooling. In Sborník 9th International Conference on Fluid Flow. 2022. p. 125-1 (125-8 p.)ISBN: 978-1-990800-06-1.
  Detail | WWW

  KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RESL, O. HTC Measurement of bottom header power cooling. 2022.
  Detail

  HNÍZDIL, M. Characterization of the F3 Cooling System. 2022.
  Detail

• 2021

  HNÍZDIL, M. Heat transfer through insulation. 2021.
  Detail

  HNÍZDIL, M. Cooling Zone Characterization of fullcone nozzles. 2021.
  Detail

  HNÍZDIL, M. Study of the effect of spray cooling in various distances, inluding the cooling homogenity. 2021.
  Detail

• 2020

  HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOMÍNEK, J. Heat treatment of thin sheets, research methodology to design a cooling system. 28th International Conference on Metallurgy and Materials, 2020, vol. 2020, no. 1, p. 258-264. ISSN: 2694-9296.
  Detail | WWW

  HNÍZDIL, M.; KOMÍNEK, J.; LEE, T.; RAUDENSKÝ, M.; ČARNOGURSKÁ, M.; CHABIČOVSKÝ, M. Prediction of Leidenfrost Temperature in Spray Cooling for Continuous Casting and Heat Treatment Processes. Metals, 2020, vol. 10, no. 11, p. 1-12. ISSN: 2075-4701.
  Detail | WWW | Full text in the Digital Library

  LEE, T.-W; PARK, J. E.; BELLEROVÁ, H.; RAUDENSKÝ, M.; HNÍZDIL, M. MOMENTUM ANALYSES FOR DETERMINATION OF DROP SIZE AND DISTRIBUTIONS DURING SPRAY ATOMIZATION. Atomization and sprays, 2020, vol. 30, no. 2, p. 97-109. ISSN: 1044-5110.
  Detail | WWW

• 2019

  HNÍZDIL, M. WaterWiper - Combined work roll cooling, coolant evacuation and wiper actuator for advanced process control and future roll grades in the cold strip mill. 2019.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M. COOLING EFFICIENCY OF VARIOUS EMULSIONS DURING COLD ROLLING. Technical contribution to the 11 th International Rolling Conference, October 1st-3rd, Sao Paulo, SP, Brazil: 2019. p. 1-9.
  Detail

• 2018

  POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; VOTAVOVÁ, H. Hydraulic descaling of wire coils during pickling program. 2018. p. 45-48.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M. Experimental study of in-line heat treatment of 1.0577 structural steel. In 17th International Conference on Metal Forming (METAL FORMING 2018). Procedia Manufacturing. Elsevier, 2018. p. 1696-1603. ISBN: 9781510869561. ISSN: 2351-9789.
  Detail | WWW | Full text in the Digital Library

  LEE,T.W.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes. HEAT TRANSFER ENGINEERING, 2018, vol. 0, no. 0, p. 1-7. ISSN: 1521-0537.
  Detail | WWW

  TUROŇ, R.; SQUERZI, M.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; SIMEČEK, P.; KREISINGER, M. Development of the tube quenching prototype unit. Acta Metallurgica Slovaca, 2018, vol. 24, no. 3, p. 251-258. ISSN: 1335-1532.
  Detail | WWW

• 2017

  HNÍZDIL, M.; CHABIČOVSKÝ, M. Tests on Full Cone nozzles. 2017. p. 1-11.
  Detail

  KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; HRABOVSKÝ, J. Work roll cooling. 2017. p. 1-39.
  Detail

  KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M. Lubrication - Study of Water spray. 2017. p. 1-16.
  Detail

  KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; HNÍZDIL, M. Studie výpočtů koeficientů přestupu tepla. 2017. p. 1-23.
  Detail

  KOTRBÁČEK, P.; HNÍZDIL, M. Study of Water spray. 2017. p. 1-12.
  Detail

  HNÍZDIL, M.; KOTRBÁČEK, P. Heat treatment of rails. Materiali in tehnologije, 2017, vol. 51, no. 2, p. 329-332. ISSN: 1580-2949.
  Detail | WWW

  CHABIČOVSKÝ, M.; HNÍZDIL, M. Full Cone Nozzles Study. 2017. p. 1-23.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M., Turoň, R.; Squerzi, M.; Šimeček, P.; Kreisinger, M. Development of the Tube Quenching Prototype Unit in Třinecké Železárny. 2017. p. 38-39.
  Detail | WWW

• 2016

  POHANKA, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; CHABIČOVSKÝ, M. Comparison of Descaling Nozzles. 2016. p. 1-22.
  Detail

  CHABIČOVSKÝ, M.; HNÍZDIL, M.; HORSKÝ, J. Měření teplot v provozních podmínkách provozu VT na vyznačených místech bezešvých trubek. 2016. p. 1-15.
  Detail

  HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M. Development of Cooling Unit H- profile. 2016. p. 1-13.
  Detail

  HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOTRBÁČEK, P. In- line heat treatment of flat products. In Proceedings European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 11 – 13 May 2016, Prague, Czech Republic. Čerčany: Asociace pro tepelné zpracování kovů, 2016. p. 1-8. ISBN: 978-80-904462-9- 8.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M. Improvement of S355J2 Steel Mechanical Properties by Heat Treatment. 24th INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 84-84. ISBN: 978-961-94088-0- 3.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; LEE, T. Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers. Journal of Flow Control, Measurement & Visualization, 2016, vol. 4, no. 3, p. 104-113. ISSN: 2329-3330.
  Detail | WWW | Full text in the Digital Library

  CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Design of quenching units for heat treatment of tubes. La Metallurgia Italiana, 2016, vol. 2016, no. 1, p. 23-28. ISSN: 0026-0843.
  Detail | WWW

• 2015

  CHABIČOVSKÝ, M.; HNÍZDIL, M.; TSENG, A.; RAUDENSKÝ, M. Effects of oxide layer on Leidenfrost temperature during spray cooling of steel at high temperatures. International journal of heat and mass transfer, 2015, no. 88, p. 236-246. ISSN: 0017-9310.
  Detail

  CHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. In- line tepelné zpracování ocelových profilů a trubek. Hutnické listy, 2015, vol. 68, no. 2, p. 14-19. ISSN: 0018-8069.
  Detail

  STRÁNSKÝ, M.; BROŽOVÁ, T.; RAUDENSKÝ, M.; HNÍZDIL, M.; TUROŇ, R. Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes. In METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 1-6. ISBN: 978-80-87294-58- 1.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces. Materiali in tehnologije, 2015, vol. 49, no. 3, p. 333-336. ISSN: 1580-2949.
  Detail | WWW

  CHABIČOVSKÝ, M.; HORSKÝ, J.; RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES. In European conference on Heat treatment 2015 a 22nd IFHTSE congres. Miláno: Associazione Italiana di metallurgia, 2015. p. 1-9. ISBN: 978-88-98990-03- 0.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M. Low temperature surface cooling. 2015. p. 1-34.
  Detail

  HORSKÝ, J.; KOTRBÁČEK, P.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; STRÁNSKÝ, M. Heat transfer measurement on run out table voestalpine Stahl. 2015. p. 1-38.
  Detail

• 2014

  HORSKÝ, J.; KOTRBÁČEK, P.; HNÍZDIL, M.; STRÁNSKÝ, M.; KVAPIL, J.; BROŽOVÁ, T.; VOTAVOVÁ, H. Development of cooling unit – H- profile. 2014. p. 1-112.
  Detail

  CHABIČOVSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOTRBÁČEK, P. Chlazení trubek. 2014. p. 1-69.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; MAGADOUX, E.; CODE, F. Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets. Advanced Materials Research, 2014, vol. 936, no. 1, p. 1720-1724. ISSN: 1022-6680.
  Detail | WWW

  POHANKA, M.; RAUDENSKÝ, M.; HNÍZDIL, M.; POLIAK, J.; HŘIBOVÁ, V.; VOTAVOVÁ, H.; BROŽOVÁ, T. Final report - Optimization of Descaling Section for POSCO Himill Plant. 2014. p. 1-153.
  Detail

  HORSKÝ, J.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOTRBÁČEK, P. Chlazení trubek – první testy. 2014. p. 1-32.
  Detail

  POHANKA, M.; RAUDENSKÝ, M.; HNÍZDIL, M.; STRÁNSKÝ, M.; KOMÍNEK, J. Heat Transfer Study of Multi–Jet Nozzle and Spray Nozzle. 2014. p. 1-143.
  Detail

• 2013

  RAUDENSKÝ, M.; POHANKA, M.; STRÁNSKÝ, M.; HNÍZDIL, M.; KOMÍNEK, J. Heat transfer study of multi-jet nozzle and spray nozzle. 2013. p. 1-52.
  Detail

  HORSKÝ, J.; LUKS, T.; ONDROUŠKOVÁ, J.; HNÍZDIL, M.; KOMÍNEK, J.; KRIŠTOF, O.; KEJÍK, P. Heat Transfer measurement of secondary cooling in continuous casting. 2013. p. 1-30.
  Detail

  RAUDENSKÝ, M.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOMÍNEK, J. Testing of the WET RJC test bench. 2013. p. 1-136.
  Detail

  HNÍZDIL, M.; CHABIČOVSKÝ, M.; RAUDENSKÝ,M. Influence of impact angle and pressure on spray cooling of vertically moving hot steel surfaces. Program and book of abstracts, 21th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2013. p. 85-85. ISBN: 978-961-92518-6- 7.
  Detail | WWW

  HNÍZDIL, M.; POHANKA, M.; RAUDENSKÝ, M.; CHABIČOVSKÝ, M.; STRÁNSKÝ, M. Cooling Tests: 1/preparation of the samples, 2/ tests to be performed. 2013. p. 1-31.
  Detail

  POHANKA, M.; KOMÍNEK, J.; RAUDENSKÝ, M.; HRABOVSKÝ, J.; HNÍZDIL, M.; STRÁNSKÝ, M. Study of technology for good flatness of plate. 2013. p. 1-106.
  Detail

  POHANKA, M.; RAUDENSKÝ, M.; KOTRBÁČEK, P.; HNÍZDIL, M.; ONDROUŠKOVÁ, J.; STRÁNSKÝ, M. Optimization of Descaling and Cooling of Rolls. 2013. p. 1-120.
  Detail

• 2012

  RAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; CHABIČOVSKÝ, M.; LUKS, T.; KVAPIL, J.; PELÍŠEK, M.; HRAZDIL, V. Measurement of the existing sprayline cooling capacity and determining of upper limit of cooling intensity. 2012. p. 1-36.
  Detail

  RAUDENSKÝ, M.; POHANKA, M.; HRABOVSKÝ, J.; HNÍZDIL, M.; KOMÍNEK, J.; STRÁNSKÝ, M. Study of technology for good flatness of plates - 1st invoice. 2012. p. 1-96.
  Detail

  RAUDENSKÝ, M.; POHANKA, M.; ONDROUŠKOVÁ, J.; STRÁNSKÝ, M.; KOTRBÁČEK, P.; HNÍZDIL, M. Optimization of Descaling and Cooling of Rolls - final payment. 2012. p. 1-106.
  Detail

  CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; HNÍZDIL, M. INFLUENCE OF WATER TEMPERATURE ON HEAT TRANSFER COEFFICIENT IN SPRAY COOLING OF STEEL SURFACES. In ENGINEERING MECHANICS 2012. Svratka: J. Náprstek, C. Fischer, 2012. p. 126-127. ISBN: 978-80-86246-39- 0.
  Detail | WWW

  RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Why oxides intensify spray cooling?. The 30th International Steel Industry Conference in Paris. 1. Paris: 2012. p. 92-93.
  Detail

  RAUDENSKÝ, M.; HNÍZDIL, M.; HWANG, J.; LEE, S.; KIM, S. Influence of Water Temperature on The Cooling Intensity of Mist Nozzles in Continuous Casting. Materiali in tehnologije, 2012, vol. 46, no. 3, p. 311-315. ISSN: 1580-2949.
  Detail

  HNÍZDIL, M.; RAUDENSKÝ, M. Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling. In 21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012). 1st Edition 2012. OSTRAVA: TANGER LTD, 2012. p. 1-6. ISBN: 978-80-87294-31- 4.
  Detail | WWW

  POHANKA, M.; HNÍZDIL, M. Visualization of the nozzles configuration Inquiry 110395. 2012. p. 1-37.
  Detail

• 2011

  RAUDENSKÝ, M.; POHANKA, M.; HNÍZDIL, M.; MARMONIER, F. COOLING SYSTEMS FOR CONTINOUS GALVANIZING LINE. In 20th Anniversary International Conference on Metallurgy and Materials - Metal 2011 - Conference Proceedings - Papers. 1. Brno: Tanger Ltd, 2011. p. 779-785. ISBN: 978-80-87294-24- 6.
  Detail

  HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In METAL 2010, 19th International Conference on metallurgy and Materials. Rožnov pod Radhoštěm: Tanger spol. s r.o., 2011. p. 43-48. ISBN: 978-80-87294-17- 8.
  Detail

  RAUDENSKÝ, M.; HNÍZDIL, M.; LEE, S.; KIM, S.; HWANG, J. Influence of Water Temperature on Cooling Intensity of Mist Nozzles in Continuous Casting. In 19th Conference on Materials and Technology. Ljubljana 2011: 2011. p. 60-70. ISBN: 978-961-92518-4- 3.
  Detail

• 2010

  RAUDENSKÝ, M.; HORSKÝ, J.; HNÍZDIL, M.; KOTRBÁČEK, P.; POHANKA, M. In- Line Heat Treatment and Hot Rolling. In International conference on advances in materials and processing technologies (AMPT2010). 1. 2010. p. 563-568. ISBN: 978-0-7354-0871- 5.
  Detail

  HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In Sborník konference. Tanger s.r.o., 2010. p. 43-48. ISBN: 978-80-87294-15- 4.
  Detail

• 2007

  HNÍZDIL, M.; BOHÁČEK, J. Obrazová analýza vodního proudu. In Engineering Mechanics 2007. Prague: Academy of Science of the Czech Republic, 2007. p. 79-80. ISBN: 978-80-87012-06- 2.
  Detail

*) Publications are generated once a 24 hours.