Publications

• 2024

  SVOBODA, P.; JOPEK, M.; SVOBODA, O.; HARANT, M. DETERMINATION OF DYNAMIC PROPERTIES OF 3D PRINTED G3SI1 STEEL. MM Science Journal, 2024, vol. 17, no. 2, p. 7230-7233. ISSN: 1803-1269.
  Detail | WWW

  SVOBODA, P.; JOPEK, M. The Effect of Strain Rate on the Friction Coefficient. Manufacturing Technology, 2024, vol. 24, no. 2, p. 289-293. ISSN: 2787-9402.
  Detail | WWW

  KOLOMÝ, Š.; JOPEK, M.; SEDLÁK, J.; BENČ, M.; ZOUHAR, J. Study of dynamic behaviour via Taylor anvil test and structure observation of M300 maraging steel fabricated by the selective laser melting method. Journal of Manufacturing Processes, 2024, vol. 125, no. 9, p. 283-294. ISSN: 2212-4616.
  Detail | WWW | Full text in the Digital Library

  KOLOMÝ, Š.; BENČ, M.; HARANT, M.; SEDLÁK, J.; JOPEK, M. Effect of different strain rates on mechanical behavior and structure of Inconel 718 produced by powder bed fusion. International Journal of Mechanics and Materials in Design, 2024, no. Léto, ISSN: 1573-8841.
  Detail | WWW

• 2023

  SMYK, E.; GIL,P..; JOPEK, M. PIV measurements of axisymmetric synthetic jet velocity. In AIP Conference Proceedings. AIP Conference Proceedings. American Institute of Physics Inc., 2023. p. 020021-1 (020021-7 p.)ISSN: 1551-7616.
  Detail | WWW

• 2022

  KUNČICKÁ, L.; KOCICH, R.; KAČOR, P.; JAMBOR, M.; JOPEK, M. Influence of Sub Structure Development within Rotary Swaged Al–Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials, 2022, vol. 15, no. 2, p. 1-19. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; JOPEK, M. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing TECHNOLOGY, 2022, vol. 22, no. 5, ISSN: 1213-2489.
  Detail | WWW

  ZOUHAR, J.; GABRIŠ, A.; JOPEK, M.; PODANÝ, K. Determination of the Johnson-Cook Material Model of EN AW 6061-T6511 with evaluation for grooving machining. Experimental Stress Analysis 2022 Book of Extended Abstract. first. Prague: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6, 2022. p. 152-153. ISBN: 978-80-01-07010-9.
  Detail

  SMYK, E.; GIL,P.; DANČOVÁ, P.; JOPEK, M. The PIV Measurements of Time-Averaged Parameters of the Synthetic Jet for Different Orifice Shapes. Applied Sciences - Basel, 2022, vol. 13, no. 1, ISSN: 2076-3417.
  Detail | WWW

• 2021

  ŘIHÁČEK, J.; PODANÝ, K.; ŘIHÁČEK, V.; PETERKOVÁ, E.; CÍSAŘOVÁ, M.; JOPEK, M.; LIDMILA, Z. Výzkumná zpráva OP PIK Inovace: Výzkum a vývoj nové generace dešťových kanalizačních vpustí. Brno: ÚST FSI VUT v Brně, 2021. p. 1-78.
  Detail

  KUNČICKÁ, L.; JOPEK, M.; KOCICH, R.; DVOŘÁK, K. Determining Johnson-Cook Constitutive Equation for Low-Carbon Steel via Taylor Anvil Test. Materials, 2021, vol. 14, no. 17, p. 1-15. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

  JOPEK, M.; FOREJT, M.; HARANT, M. Mechanical properties of aluminium alloys at high strain rate. MM Science Journal, 2021, vol. 2021, no. 2, p. 4505-4511. ISSN: 1803-1269.
  Detail | WWW

  JOPEK, M. Determination of Carbon Steel Dynamic Properties. Manufacturing TECHNOLOGY, 2021, vol. 21, no. 4, p. 479-482. ISSN: 1213-2489.
  Detail | WWW | Full text in the Digital Library

• 2004

  FOREJT, M.; JOPEK, M.; BUCHAR, J. Estabilishing the dynamic mechanical properties of materials by the hopkinson test method. Acta Mechanica Slovaca, 2004, vol. 8, no. 2B, p. 93-98. ISSN: 1335- 2393.
  Detail

• 2003

  FOREJT, M., JOPEK, M., PERNICA, Z., KRÁSNY, D. Zjišťování rázových sil a napětí při Taylorově testu. In 8th International Conference TECHNOLÓGIA 2003. Bratislava: SjF STU v Bratislave, 2003. p. 118- 1 (118-4 p.)ISBN: 80-227-1935- 8.
  Detail

  FOREJT, M., JOPEK, M. Modelling the Taylor Anvil Test. In 11th International Scientific Conference CO-MAT- TECH 2003. Trnava: Slovak University of Technology in bratislava, 2003. p. 193-201. ISBN: 80-227-1949- 8.
  Detail

• 2002

  FOREJT, M., KREJČÍ, J., JOPEK, M., BUCHAR, J., PERNICA, Z. Dynamic models of formed materials. Acta Mechanica Slovaca, 2002, vol. 6, no. 2, p. 21-26. ISSN: 1335- 2393.
  Detail

  FOREJT, M., BUCHAR, J., JOPEK, M., KREJČÍ, J. Parametric numerical studies of the taylor test. In 11th International Metallusgical& Materials Conference METAL 2002. Ostrava: TANGER, s.r.o. Ostrava, 2002. p. 80/ 1 (80/7 p.)ISBN: 80-85988-73- 9.
  Detail

  FOREJT, M., KREJČÍ, J., JOPEK, M. Optimalizace parametrů dynamických modelů tvářených materiálů. In 6th International conference FORM 2002, Forming technology, tools and machines. Brno: Brno University of Technology, 2002. p. 37 ( p.)ISBN: 80-214-2162- 2.
  Detail

  FOREJT, M., KREJČÍ, J., JOPEK, M. Optimalizace parametrů dynamických modelů tvářených materiálů. In Form 2002. Brno: Brno university of technology, 2002. p. 37 ( p.)ISBN: 80-214-2162- 2.
  Detail

• 2001

  JOPEK, M. Modeling mechanical properties of carbon steels at high strain rates. In 3rd international conference of PhD students. Miskolc, Hungary: University of Miskolc, 2001. p. 211 ( p.)ISBN: 963-661-480- 6.
  Detail

  FOREJT, M., JOPEK, M., KREJČÍ, J. Effect of deformation changes on mikrostrukture of forming steels. In Metal 2001: Proceedings of the 10th international metalurgical conference, symposium B. Ostrava: TANGER s.r.o. Ostrava, 2001. p. 21/ 1 (21/6 p.)ISBN: 80-85988-56- 9.
  Detail

  FOREJT, M., KREJČÍ, J., JOPEK, M., BUCHAR, J. Relations between structure of material, strain rate and numerical simulations. In 9th International Scientific Conference CO-MAT- TECH 2001. Bratislava: STU Bratislava, 2001. p. 64-69. ISBN: 80-227-1591- 3.
  Detail

  JOPEK, M., PERNICA, Z., FOREJT, M. Chování materiálů za vyšších teplot a rychlostí deformace. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2001, vol. 279/ 2001, no. 72, p. 85 ( p.)ISSN: 1429- 6055.
  Detail

  JOPEK, M., FOREJT, M. Modelování mechanického chování uhlíkové oceli TRISTAL. In Juniormat´ 01. Brno: ÚMI FSI VUT Brno a ČSNMT, 2001. p. 176 ( p.)ISBN: 80-214-1885- 0.
  Detail

  PERNICA, Z., JOPEK, M., FOREJT, M. Zkoušení materiálů pomocí Hopkinsonova Testu. In Juniormat´ 01. Brno: ÚMI FSI VUT Brno a ČSNMT, 2001. p. 127 ( p.)ISBN: 80-214-1885- 0.
  Detail

  FOREJT, M., JOPEK, M., KREJČÍ, J., KREJČOVÁ, J. Deformation of steel for applications during taylor test in dependence on impact velocity. In 7th International conference Technológia 2001. Bratislava: STU Bratislava, 2001. p. 748-751. ISBN: 80-227-1567- 0.
  Detail

• 2000

  FOREJT, M., JOPEK, M., BUCHAR, J. Constitutive equations for the behaviour of BCC steels at high strain rates. In 9th International Metallurgical Conference METAL 2000. OSTRAVA , Hotel ATOM, Czech Republic: TANGER s.r.o. Ostrava, 2000. p. B1-214/ 1 (B1-214/6 p.)ISBN: 80-85988-48- 8.
  Detail

  JOPEK, M.; BUCHAR, J.; FOREJT, M. Plastic deformation at real compression rates. In 8th international conference on METAL FORMING 2000. Akademia Górniczo-Hutnicza, Kraków, Pola: A.A.BALKEMA/Rotterdam/Brookfield/ 2000, 2000. p. 729 ( p.)ISBN: 90-5809-157- 0.
  Detail

  BUCHAR, J., FOREJT, M., JOPEK, M. Evaluation of constitutive relations for high strain rate behaviour using the Taylor test. 2000, vol. 10, no. 9, p. 75 ( p.)
  Detail

  FOREJT, M., JOPEK, M., BUCHAR, J. Chování tvářené oceli při vysokých rychlostech deformace. In 5th International conference Forming Technology, Tools and Machines - FORM 2000. BRNO, Congres Centre Brno Co: Brno University of Technology, 2000. p. 101-106. ISBN: 80-214-1661- 0.
  Detail

  FOREJT, M., BUCHAR, J., JOPEK, M. High strain rate compression loading of BCC steels. In 8.medzinárodná vedecká konferencia CO-MAT- TECH 2000. STU Materiálovotechnologická fakulta v T: STU v Bratislave, Vazovova 5, 2000. p. 45-50. ISBN: 80-227-1413- 5.
  Detail

  BUCHAR, J.; FOREJT, M.; JOPEK, M. Evaluation of constitutive relations for high strain rate behaviour using the Taylor test. Journal de Physique IV, 2000, vol. 10, no. 9, p. Pr9- 75 (Pr9-80 p.)ISSN: 1155- 4339.
  Detail

• 1999

  FOREJT, M.; BUCHAR, J.; JOPEK, M. Plastické deformace při vysokých rychlostech deformace. In 6th International conference TECHNOLÓGIA´ 99. Bratislava, Slovenská republika: ES STU Bratislava, 1999. p. 286-289. ISBN: 80-227-1255- 8.
  Detail

*) Publications are generated once a 24 hours.