Přístupnostní navigace
E-application
Search Search Close
Ing.
Ph.D.
CEITEC, RG-2-05 – Researcher
pavel.gejdos@ceitec.vutbr.cz
Send BUT message
2023
MOHAN, M.; BUDAY, J.; PROCHAZKA, D.; GEJDOŠ, P.; POŘÍZKA, P.; KAISER, J. Laser-induced plasma on the boundary of two matrices. Journal of Analytical Atomic Spectrometry, 2023, vol. 38, no. 1, p. 2433-2440. ISSN: 1364-5544.Detail | WWW | Full text in the Digital Library
SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. ISSN: 1742-6588.Detail | WWW
2022
GEJDOŠ, P.; JULIŠ, M.; KLAKURKOVÁ, L.; DYČKA, M. Interaction of AZ91 Magnesium Alloy with Ceramic Shell during Investment Casting. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 31-36. ISSN: 1012-0394.Detail | WWW
PAVLOUŠKOVÁ, Z.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ŠVEJCAR, J. Causes of Injection Mould Insert Block Damage. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: Trans Tech Publications Ltd, 2022. p. 127-132. ISSN: 1662-9795.Detail
VRAŽINA, T.; ŠULÁK, I.; POLOPRUDSKÝ, J.; ZÁBRANSKÝ, K.; GEJDOŠ, P.; HADRABA, H.; ČELKO, L. Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating. In Proceedings 31st International Conference on Metallurgy and Materials. 28th International Conference on Metallurgy and Materials. Tanger Ltd., 2022. p. 487-492. ISBN: 978-80-88365-06-8. ISSN: 2694-9296.Detail | WWW
KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ŠVEJCAR, J.; CILEČEK, J. Production and Application of Magnesium Alloys Castings. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 19-25. ISSN: 1012-0394.Detail | WWW
KASHIMBETOVA, A.; TKACHENKO, S.; REMEŠOVÁ, M.; MATA-LEIJA, A.; GEJDOŠ, P.; ČELKO, L.; MONTUFAR JIMENEZ, E. Correlating the Microstructure with the Mechanical Behaviour of Titanium Structures Produced by Robotic Assisted Deposition. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 26-30. ISSN: 1012-0394.Detail | WWW
ZÁBRANSKÝ, K.; KLAKURKOVÁ, L.; GEJDOŠ, P.; JULIŠ, M.; ŠVEJCAR, J. Analysis of the Causes of Shaft Damage. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: Trans Tech Publications Ltd, 2022. p. 133-138. ISSN: 1662-9795.Detail
2021
KUSMIČ, D.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; VILIŠ, J.; ČECH, O. The Corrosion Resistance of Hard Anodised EN AW 7075 T6 Alloy. In ECS Transactions. ECS Transaction. 105. Electrochemical Society, 2021. p. 329-337. ISBN: 9781607685395. ISSN: 1938-6737.Detail | WWW | Full text in the Digital Library
TKACHENKO, S.; KASHIMBETOVA, A.; GEJDOŠ, P.; OLIVER-URRUTIA, C.; CASAS LUNA, M.; JULIŠ, M.; MONTUFAR JIMENEZ, E.; ČELKO, L. Effects of the Heat Treatment Temperature on Composition, Microstructure and In Vitro Mineralization of Alkali Treated Titanium. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1186-1191. ISBN: 978-80-87294-99-4.Detail | WWW | Full text in the Digital Library
2020
SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.Detail | WWW | Full text in the Digital Library
CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, vol. 46, no. 15, p. 24129-24136. ISSN: 0272-8842.Detail | WWW
SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.Detail | WWW
ŠVEJCAR, J.; JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; ZIKMUND, T. Analysis of Causes of Defects Appearance in Wire Drawing. In Metallography and Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 217-222. ISSN: 1662-9507.Detail | WWW
DYČKA, M.; JULIŠ, M.; KLAKURKOVÁ, L.; DYČKOVÁ, L.; GEJDOŠ, P. Mold Metal Reactons of Magnesium Alloy AZ91E Using SF6 and 3M NOVEC 612 as Protective Gasses in Investment Casting Technology. In METAL 2020 - 29th International Conference on Metallurgy and Materials. Tanger Ltd., 2020. p. 903-903. ISBN: 9788087294970.Detail | WWW
KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P. Analysis of Causec of Baby Stroller Construction Damage. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 179-184. ISSN: 1662-9507.Detail | WWW
JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P. Analysis of Corrosion resistance of Heat Exchanger Plates Made of AISI 316L Steel. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 245-250. ISSN: 1662-9507.Detail | WWW
GEJDOŠ, P.; JULIŠ, M.; KLAKURKOVÁ, L. Metallographic Analysis of Stainless Steel Inner Shaft of Centrifugal Pump. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 223-228. ISSN: 1662-9507.Detail | WWW
SUK, L.; PETROSYAN, T.; ŠTEVANKA, K.; VLČEK, D.; GEJDOŠ, P. Experimental Investigation of Critical Heat Flux on Different Surfaces at Low Pressure and Low Flow. ENERGIES, 2020, vol. 13, no. 19, p. 1-23. ISSN: 1996-1073.Detail | WWW | Full text in the Digital Library
2019
DYČKA, M.; DYČKOVÁ, L.; GEJDOŠ, P.; JULIŠ, M. Microstructural study of AZ91C magnesium alloy castings produced by investment casting in as-cast state and after heat treatment. In Metal 2019. 1. Ostrava: Tanger Ltd., 2019. p. 1457-1462. ISBN: 978-80-87294-92-5.Detail | WWW | Full text in the Digital Library
RUDOLF, P.; JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; HUDEC, M. Cavitation erosion testing of different cavitation-resistent materials and coatings using the cavitating jet method. In IOP Conf. Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. Spojené království Velké Británie a Severního Irska: IOP Publishing, 2019. p. 1-10. ISSN: 1755-1307.Detail | WWW
2018
JULIŠ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L. Výzkum korozní odolnosti materiálů a mat. uzlů VE. 2018. p. 1-76. Detail
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P.; JECH, D. High-Temperature Low-Cycle Fatigue Behaviour of MAR-M247 Coated with Newly Developed Thermal and Environmental Barrier Coating. Advances in Materials Science and Engineering, 2018, vol. 2018, no. 1, p. 1-8. ISSN: 1687-8434.Detail | WWW | Full text in the Digital Library
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; JECH, D.; GEJDOŠ, P. Low cycle fatigue performance of Ni-based superalloy coated with complex thermal barrier coating. MATERIALS CHARACTERIZATION, 2018, no. 139, p. 347-354. ISSN: 1044-5803.Detail | WWW
2017
KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; SKALKA, P.; REMEŠOVÁ, M.; ČELKO, L. Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 776-782. ISSN: 1350-6307.Detail | WWW
PAVLOUŠKOVÁ, Z.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; REMEŠOVÁ, M. Influence of microstructure on machinability of material and its final surface quality. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 112-117. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
HORYNOVÁ, M.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; DYČKOVÁ, L. Evaluation of surface degradation of deoxidized AW-AlMg0.7Si alloy. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 136-141. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; DYČKOVÁ, L.; ŠVEJCAR, J. Failure Analysis of Corrugated Hoses. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 68-73. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; REMEŠOVÁ, M.; HÉGR, E. Analysis of Surface Layer Defects on Carburezed Steel Component after Alkaline Blackening. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 274-277. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.Detail | WWW
KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; HORYNOVÁ, M. The Use of Microstructural Analysis for the Evaluation of Quality of Double-Wall Pipes. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 269-273. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.Detail | WWW
HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Influence of Microstructural Parameters on the Corrosion Resistance of 7075 Aluminium Alloy. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications Ltd., 2017. p. 303-307. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.Detail | WWW
OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P. Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. Surface and Coatings Technology, 2017, vol. 318, no. 1, p. 374-381. ISSN: 0257-8972.Detail | WWW
CASAS LUNA, M.; TKACHENKO, S.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. Acta Metallurgica Sinica (English Letters), 2017, vol. 30, no. 4, p. 319-325. ISSN: 1006-7191.Detail | WWW | Full text in the Digital Library
HORYNOVÁ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Failure analysis of casing of draft tube of turbine used in hydropower plant. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 848-854. ISSN: 1350-6307.Detail | WWW
DYČKOVÁ, L.; KLAKURKOVÁ, L.; GEJDOŠ, P.; REMEŠOVÁ, M.; JULIŠ, M.; ČELKO, L. Causal analysis of damage of a cover. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 57-62. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
ŠVEJCAR, J.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; REMEŠOVÁ, M.; DYČKOVÁ, L. Analysis of causes of fractures of terminal board bolts. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 93-98. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
GEJDOŠ, P. Analýza povrchové vrstvy čepů a pouzder řetězů. 2017. p. 1 (1 s.). Detail
CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Tricalcium Phosphate - Magnesium Interface: Microstructure and Properties. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 412-415. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.Detail | WWW | Full text in the Digital Library
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. Degradation of YSZ/EUCOR TBC Coating System during High Temperature Low Cycle Fatigue Tests. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 420-423. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.Detail | WWW
GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; DYČKOVÁ, L.; ŠVEJCAR, J. Analysis of damage of solder joint of heat exchanger. In Přínos metalografie pro řešení výrobních problémů. Solid State Phenomena. 14. Switzerland: Trans Tech Publications, 2017. p. 63-67. ISBN: 978-80-01-06150-3. ISSN: 1662-9779.Detail
2016
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. High Temperature Degradation of YSZ/ EUCOR TBC Coating System during Low Cycle Fatigue Tests. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. p. 219-219. ISBN: 978-80-214-5357- 9.Detail
CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Structure and Properties of Calcium Phosphate - Magnesium Interface Processed by Spark Plasma Sintering. Materials Structure & Micromechanics of Fracture. Brno, Czech Republic: Brno University of Technology, 2016. p. 196-196. ISBN: 978-80-214-5357- 9.Detail
DVOŘÁK, J.; ZIKMUND, T.; KOUŘIL, J.; GEJDOŠ, P.; KAISER, J. Rentgenová počítačová tomografie elektronické vrstvy snímače otáček. Jemná mechanika a optika, 2016, vol. 61, no. 6, p. 165-168. ISSN: 0447-6441.Detail
KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; HORYNOVÁ, M. The Use of Microstructural Analysis for the Evaluation of Quality of Double- Wall Pipes. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 91-91. ISBN: 978-80-553-2547- 7.Detail
GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; REMEŠOVÁ, M.; HÉGR, E. Analysis of Surface Layer Defects on Carburezed Steel Component after Alkaline Blackening. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 92-92. ISBN: 978-80-553-2547- 7.Detail
HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Influence of Microstructural parameters on the Corrosion Resistance of Aluminium Alloy BS L170. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. p. 98-98. ISBN: 978-80-553-2547- 7.Detail
2015
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. EFFECT OF GRIT BLASTING SURFACE TREATMENT ON HIGH TEMPERATURE LOW, CYCLE FATIGUE LIFE OF INCONEL 713LC. In Multi Scale Design of Advanced Materials. Brno: 2015. p. 139-144. ISBN: 978-80-214-5146- 9.Detail
JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; HORYNOVÁ, M.; HÉGR, E.;SYTAŘ, P. Methods and techniques of samples preparation for assessment of layers after chemical and heat treatment. In Conference on Chemical Heat Treatment of Metal Surfaces. Čerčany, Czech Republic: Asociace pro tepelné zpracování kovů ECOSOND s. r. o., 2015. p. 96-101. ISBN: 978-80-904462-8- 1.Detail
HORYNOVÁ, M.; DOLEŽAL, P.; ZAPLETAL, J.; GEJDOŠ, P.; PODRÁBSKÝ, T. Influence of aluminium content on corrosion behavior of AZ type magnesium alloy. In MULTI-SCALE DESIGN OF ADVANCEDMATERIALS- CONFERENCE PROCEEDINGS. 2015. p. 42-47. ISBN: 978-80-214-5146- 9.Detail
2013
HORYNOVÁ, M.; ZAPLETAL, J.; DOLEŽAL, P.; GEJDOŠ, P. Evaluation of fatigue life of AZ31 magnesium alloy fabricated by squeeze casting. Materials and design, 2013, vol. 45, no. 3, p. 253-264. ISSN: 0261- 3069.Detail
HORYNOVÁ, M.; MODRÁČKOVÁ, I.; DOLEŽAL, P.; GEJDOŠ, P.; ZAPLETAL, J. Influence of Corrosion Damage on Fatigue Behaviour of AZ31 Magnesium Alloy. Magnesium Workshop Madrid 2013. 2013. p. 25-25. Detail
2012
ZAPLETAL, J.; DOLEŽAL, P.; GEJDOŠ, P.; HORYNOVÁ, M. INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURE AND FATIGUE BEHAVIOR OF AZ61 MAGNESIUM ALLOY. Acta Metallurgica Slovaca, 2012, vol. 18, no. 2, p. 92-99. ISSN: 1335- 1532.Detail
VLAŠIC, F.; KOULA, V.; MAZAL, P.; GEJDOŠ, P. Monitoring and Evaluation of Cyclic Damage in Preinitiation Stages of Fatigue Process Using Nondestructive Testing Methods. In Proceedings of the 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission EWGAE 30/ ICAE 7 Granada, September 2012. 2012. Granada, Spain: University of Granada and EWGAE, 2012. p. 111- 1 (111-13 p.)ISBN: 978-84-615-9941- 7.Detail
VLAŠIC, F.; KOULA, V.; MAZAL, P.; GEJDOŠ, P. Monitorování plastické deformace v raných stádiích únavového procesu užitím metody akustické emise. In Defektoskopie 2012 / NDE for Safety. 2012. Brno: VUT v Brně a ČNDT, 2012. p. 279-288. ISBN: 978-80-214-4609- 0.Detail
2011
VLAŠIC, F.; NOHÁL, L.; GEJDOŠ, P.; MAZAL, P. DETEKCE ÚNAVOVÉHO POŠKOZOVÁNÍ V KONSTRUKČNÍCH MATERIÁLECH VYUŽITÍM METODY AKUSTICKÉ EMISE. In NDE for Safety / Defektoskopie 2011. 2011. Brno: CNDT, VUT, 2011. p. 207-214. ISBN: 978-80-214-4358- 7.Detail
ZAPLETAL, J.; DOLEŽAL, P.; GEJDOŠ, P.; HORYNOVÁ, M. INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURE AND FATIGUE BEHAVIOR OF AZ61 MAGNESIUM ALLOY. Konstrukčné Materiály 2011. 2011. p. 1-4. Detail
GEJDOŠ, P.; ZAPLETAL, J.; DOLEŽAL, P.; HORYNOVÁ, M. EVALUATION OF FATIGUE LIFE OF AZ31 MAGNESIUM ALLOY. Konstrukčné Materiály 2011. 2011. p. 1-5. Detail
DOLEŽAL, P.; ZAPLETAL, J.; HORYNOVÁ, M.; GEJDOŠ, P.; ČELKO, L. CYCLIC DEFORMATION RESPONSE OF AZ31 MAGNESIUM ALLOY AFTER CORROSION DEGRADATION. Chemické listy, 2011, vol. 105, no. S, p. 787-789. ISSN: 0009- 2770.Detail
2010
DOLEŽAL, P.; ZAPLETAL, J.; GEJDOŠ, P.; HORYNOVÁ, M. Vliv tepelného zpracování na mechanické vlastnosti hořčíkové slitiny AZ61. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2010, vol. 2010, no. 337, p. 165-170. ISSN: 1429- 6055.Detail
ZAPLETAL, J.; GEJDOŠ, P.; LIŠKUTÍN, P. Studium únavového chování hliníkové slitiny EN AW-7075 v nízkocyklové oblasti. In Letná škola únavy materiálov ' 2010. Žilina: Žilinská univerzita v Žiline pre Strojnícku fakultu ŽU v Žiline, 2010. p. 144-147. ISBN: 978-80-554-0235- 2.Detail
ZAPLETAL, J.; NĚMCOVÁ, A.; GEJDOŠ, P. THE STUDY OF LOW CYCLIC BEHAVIOUR OF AZ61 MAGNESIUM ALLOY. Transaction of the VŠB-Technical university of Ostrava, Mechanical series, 2010, vol. LVI, no. 2, p. 225-231. ISSN: 1210- 0471.Detail
HORYNOVÁ, M.; DOLEŽAL, P.; JANOVÁ, D.; GEJDOŠ, P. Vliv tepelného zpracování na chemickou a mikrostrukturní heterogenitu hořčíkové slitiny AZ61. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2010, vol. 2010, no. 337, p. 179-187. ISSN: 1429- 6055.Detail
NĚMCOVÁ, A.; GEJDOŠ, P.; ZMRZLÝ, M.; DOLEŽAL, P.; PACAL, B. THE EFFECT OF PURE ALUMINIUM COATING ON CORROSION RESISTANCE OF ALCU4MG1 ALLOY. Transaction of the VŠB-Technical university of Ostrava, Mechanical series, 2010, vol. LVI, no. 2, p. 143-148. ISSN: 1210- 0471.Detail
GEJDOŠ, P.; ZAPLETAL, J.; NĚMCOVÁ, A.; PODRÁBSKÝ, T. Únavové vlastnosti hořčíkové slitiny AZ61. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2010, vol. 2010, no. 337, p. 171-177. ISSN: 1429- 6055.Detail
HORYNOVÁ, M.; DOLEŽAL, P.; GEJDOŠ, P.; ZAPLETAL, J.; JANOVÁ, D. Influence of heat treatment on mechanical properties and microstructure of AZ61 magnesium alloy. Transaction of the VŠB-Technical university of Ostrava, Mechanical series, 2010, vol. LVI, no. 2, p. 73-82. ISSN: 1210- 0471.Detail
2009
GEJDOŠ, P.; PODRÁBSKÝ, T.; ZAPLETAL, J. FATIGUE PROPERTIES OF AZ31 MAGNESIUM ALLOY WITH CALCIUM ADDITION. Transaction of the VŠB-Technical university of Ostrava, Mechanical series, 2009, vol. 2009, no. 3, p. 73-79. ISSN: 1210- 0471.Detail
2008
ZAPLETAL, J.; GEJDOŠ, P.; PODRÁBSKÝ, T.; VĚCHET, S. Únavové vlastnosti hořčíkové slitiny AZ31. Zeszyty naukowe politechniki Opolskiej seria Mechanika, 2008, vol. 2008, no. 327, p. 187-192. ISSN: 1429- 6055.Detail
*) Publications are generated once a 24 hours.