Publications

• 2022

  KRÁL, P.; KONEČNÝ, P.; LEHNER, P.; KATZER, J. Numerical Analysis of Flexural Behavior of Concrete Element with 3-D Printed Formwork. In AIP Conference Proceedings 2425. AIP Conference Proceedings. 2022. p. 1-4. ISSN: 1551-7616.
  Detail | WWW

• 2020

  KRÁL, P.; HRADIL, P.; KALA, J. Modelling the tensile softening behaviour of concrete in LS-Dyna software. In IOP Conference Series: Materials Science and Engineering (WMCAUS 2020). IOP Conference Series: Materials Science and Engineering. Prague, Czech Republic: IOP Publishing, 2020. p. 1-7. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  JINDRA, D.; HRADIL, P.; KALA, J.; KRÁL, P. The Suitable Discretization of Concrete Plate Finite Element Model Exposed to High Velocity Loading. CUTE 2020. Czech Republic, Ostrava: 2020. p. 15-18. ISBN: 978-80-248-4457-2.
  Detail

  JINDRA, D.; HRADIL, P.; KALA, J.; KRÁL, P. Mesh Size Influence of the Concrete Slab FE Model Exposed to Impact Load for Various Material Models. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2020, vol. 20, no. 2, p. 1-7. ISSN: 1804-4824.
  Detail | WWW

  KRÁL, P.; KALA, J.; HRADIL, P. Algorithmization and application of constitutive equations for modeling the plane stress state of concrete. In AIP Conference Proceedings (ICNAAM 2019). AIP conference proceedings. Greece, Rhodes: 2020. p. 1-4. ISBN: 978-0-7354-4025-8. ISSN: 0094-243X.
  Detail

• 2019

  KRÁL, P.; HRADIL, P.; KALA, J. Four-Point Bending Test on a High Reinforced Concrete Beam: Nonlinear Numerical Analysis Using Material Parameter Identification. In World Multidisciplinary Civil Engineering. IOP Conference Series: Materials Science and Engineering. 2019. p. 1-9. ISSN: 1757-899X.
  Detail

  WALD, F.; ŠABATKA, L.; BAJER, M.; BARNAT, J.; GÖDRICH, L.; HOLOMEK, J.; JEHLIČKA, P.; KABELÁČ, J.; KOČKA, M.; KOLAJA, D.; KRÁL, P.; KUŘÍKOVÁ, M.; VILD, M. Benchmark cases for advanced design of structural steel connections. Praha: Czech Technical University in Prague, 2019. 230 p. ISBN: 978-80-01-06565-5.
  Detail

  KRÁL, P. ANALÝZA CITLIVOSTI JAKO NÁSTROJ PŘI OPTIMALIZACI PARAMETRŮ NELINEÁRNÍHO MATERIÁLOVÉHO MODELU. JUNIORSTAV 2019. Brno: 2019. p. 258-264. ISBN: 978-80-86433-71-4.
  Detail | WWW

  KRÁL, P.; KALA, J.; HRADIL, P. Study of the efficiency and accuracy of optimisation algorithms within inverse identification of the parameter values of a nonlinear concrete material model. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 2, p. 9-16. ISSN: 1213-1962.
  Detail | WWW

  KRÁL, P.; HRADIL, P.; KALA, J.; KALA, Z.; HOKEŠ, F. Using the inverse identification of parameters of a nonlinear concrete material model for analysis of RC structural element. In AIP Conference Proceedings. AIP Conference Proceedings. 2019. p. 1-4. ISSN: 1551-7616.
  Detail

  HOKEŠ, F.; KRÁL, P.; TRCALA, M. Modelling uniaxial compression of concrete specimen with utilization of nonlinear material models inside ANSYS and RFEM. In AIP Conference Proceedings. AIP Conference Proceedings. 2019. p. 1-4. ISBN: 978-0-7354-1854-7. ISSN: 1551-7616.
  Detail

• 2018

  KRÁL, P.; HRADIL, P.; KALA, J. Evaluation of constitutive relations for concrete modeling based on an incremental theory of elastic strain-hardening plasticity. Computers and Concrete, 2018, vol. 22, no. 2, p. 227-237. ISSN: 1598-818X.
  Detail | WWW

  KRÁL, P.; HUŠEK, M.; HRADIL, P.; KALA, J.; MAŇAS, P. Identification of Concrete Material Model Parameters Using Optimisation Algorithms. Advances in Military Technology, 2018, vol. 2018, no. 1, p. 33-45. ISSN: 1802-2308.
  Detail

  HUŠEK, M.; KRÁL, P.; KALA, J.; HRADIL, P.; MAŇAS, P. Concrete Targets with Heterogeneities under Impact Loading. Advances in Military Technology, 2018, vol. 13, no. 1, p. 107-118. ISSN: 1802-2308.
  Detail

  KRÁL, P.; HRADIL, P.; HUŠEK, M.; KALA, J.; KALA, Z. Sensitivity Analysis and Optimization as Tools for the Inverse Concrete Material Model Parameter Identification. In AIP Conference Proceedings. AIP Conference Proceedings. 2018. p. 1-4. ISBN: 978-0-7354-1690-1. ISSN: 1551-7616.
  Detail

  KRÁL, P. TESTOVÁNÍ KONSTITUTIVNÍCH ROVNIC PRO MODELOVÁNÍ BETONU. In Juniorstav 2018. Brno, Česká republika: 2018. p. 570-575. ISBN: 978-80-86433-69-1.
  Detail

  HUŠEK, M.; KALA, J.; KRÁL, P.; HOKEŠ, F. Using Noise to Generate the Material Structure of Concrete. In AIP Conference Proceedings. AIP Conference Proceedings. 2018. p. 1-4. ISBN: 978-0-7354-1690-1. ISSN: 1551-7616.
  Detail

  KRÁL, P.; KALA, J.; HRADIL, P. Studie efektivity a přesnosti optimalizačních algoritmů při inverzní identifikaci hodnot parametrů nelineárního materiálového modelu betonu. In Modelování v mechanice 2018. Ostrava, Česká republika: 2018. p. 1-12. ISBN: 978-80-248-4175-5.
  Detail

• 2017

  KRÁL, P.; HUŠEK, M. Concrete in Uniaxial and Triaxial Compression – Experimental and Numerical Analysis in Interaction with Material Parameter Optimization. In Juniorstav 2017. Brno, Česká republika: 2017. p. 1-6. ISBN: 978-80-214-5462-0.
  Detail

  KRÁL, P.; HUŠEK, M. BETON V JEDNOOSÉM A TŘÍOSÉM TLAKU – EXPERIMENTÁLNÍ A NUMERICKÁ ANALÝZA V INTERAKCI S OPTIMALIZACÍ MATERIÁLOVÝCH PARAMETRŮ. In 19. odborná konference doktorského studia Juniorstav 2017. Brno, Česká republika: 2017. p. 1-7. ISBN: 978-80-214-5462-0.
  Detail

  KRÁL, P.; HOKEŠ, F.; HUŠEK, M.; KALA, J.; HRADIL, P. Optimization-Based Inverse Identification of the Parameters of a Concrete Cap Material Model. In World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-10. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  KRÁL, P.; HRADIL, P.; HUŠEK, M.; HOKEŠ, F. Comparison of Responses of Concrete Damage Material Models with Respect to Optimization-Based Material Parameter Identification. In AIP Conference Proceedings. AIP Conference Proceedings. 2017. p. 1-4. ISBN: 978-0-7354-1538-6. ISSN: 1551-7616.
  Detail | WWW

  KRÁL, P.; HRADIL, P.; KALA, J. Inverse Identification of the Material Parameters of a Nonlinear Concrete Constitutive Model Based on the Triaxial Compression Strength Testing. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 39, p. 38-46. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  HUŠEK, M.; KRÁL, P.; KALA, J.; HRADIL, P.; MAŇAS, P. Simulating Randomized Failure of Concrete Targets. In Conference Proceedings of 6th International Conference on Military Technologies 2017. Brno: 2017. p. 303-307. ISBN: 978-1-5090-5667-5.
  Detail | WWW

  KRÁL, P.; HRADIL, P.; KALA, J.; HOKEŠ, F.; HUŠEK, M. Identification of the Parameters of a Concrete Damage Material Model. In Modern Building Materials, Structures and Techniques, MBMST 2016. Procedia Engineering. 2017. p. 578-585. ISSN: 1877-7058.
  Detail

  KRÁL, P.; HUŠEK, M.; HRADIL, P.; KALA, J.; MAŇAS, P. Optimization of the Material Parameters of the Continuous Surface Cap Model for Concrete. In Conference Proceedings of 6th International Conference on Military Technologies 2017. Brno: 2017. p. 298-302. ISBN: 978-1-5386-1988-9.
  Detail | WWW

  WALD, F.; ŠABATKA, L.; BAJER, M.; BARNAT, J.; GÖDRICH, L.; HOLOMEK, J.; JEHLIČKA, P.; KABELÁČ, J.; KOČKA, M.; KOLAJA, D.; KRÁL, P.; KUŘÍKOVÁ, M.; VILD, M. Benchmark cases for advanced design of structural steel connections. Praha: Česká technika - nakladatelství ČVUT, 2017. 201 p. ISBN: 978-80-01-06313-2.
  Detail

  HOKEŠ, F.; HUŠEK, M.; KRÁL, P. Nonlinear Numerical Study of Pin Joint at Static and Cyclic Loading. Juniorstav 2017. Brno, Česká republika: 2017. p. 1-8. ISBN: 978-80-214-5462-0.
  Detail

  HOKEŠ, F.; KRÁL, P.; HUŠEK, M.; KALA, J. Study on Identification of Material Model Parameters from Compact Tension Test on Concrete Specimens. In IOP Conf. Series: Materials Science and Engineering of World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium 2017. IOP Conference Series: Materials Science and Engineering. 2017. p. 1-10. ISSN: 1757-8981.
  Detail | WWW

  HUŠEK, M.; KALA, J.; KRÁL, P.; HOKEŠ, F. Steel Fibre Reinforced Concrete Simulation with the SPH Method. In IOP Conf. Series: Materials Science and Engineering of World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium 201. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-10. ISSN: 1757-899X.
  Detail | WWW | Full text in the Digital Library

  HUŠEK, M.; KALA, J.; HOKEŠ, F.; KRÁL, P. Conversion of Fractal Fields into Heterogeneities inside SPH Simulations. In IOP Conf. Series: Materials Science and Engineering of World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium 2017. IOP Conference Series: Materials Science and Engineering. 2017. p. 1-10. ISSN: 1757-8981.
  Detail | WWW

  HUŠEK, M.; HOKEŠ, F.; KALA, J.; KRÁL, P. Inclusion of Randomness into SPH Simulations. WSEAS TRANSACTION on HEAT and MASS TRANSFER, 2017, vol. 2017, no. 1, p. 1-10. ISSN: 2224-3461.
  Detail | WWW

  HOKEŠ, F.; HUŠEK, M.; KALA, J.; KRÁL, P. Predicting the Load-Carrying Capacity of Reinforced Concrete Structural Element. WSEAS Transactions on Applied and Theoretical Mechanics, 2017, vol. 2017, no. 12, p. 1-10. ISSN: 2224-3429.
  Detail | WWW

  HOKEŠ, F.; KRÁL, P.; KRŇÁVEK, O.; HUŠEK, M. Improved Sensitivity Analysis in the Inverse Identification of the Parameters of a Nonlinear Material Model. In Modern Building Materials, Structures and Techniques. Procedia Engineering. 2017. p. 1-8. ISSN: 1877-7058.
  Detail

  HUŠEK, M.; HOKEŠ, F.; KALA, J.; KRÁL, P. Inclusion of Randomness into SPH Simulations. WSEAS Transaction on Heat and Mass Transfer, 2017, vol. 2017, no. 12, p. 1-10. ISSN: 1790-5044.
  Detail | WWW

• 2016

  HUŠEK, M.; KALA, J.; HOKEŠ, F.; KRÁL, P. Influence of SPH Regularity and Parameters in Dynamic Fracture Phenomena. In World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, WMCAUS 2016. Procedia Engineering. Praha, Česká republika: Elsevier, 2016. p. 489-496. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  KRÁL, P.; KALA, J.; HRADIL, P. Verification of the elasto-plastic behavior of nonlinear concrete material models. International Journal of Mechanics, 2016, vol. 2016, no. 10, p. 175-181. ISSN: 1998-4448.
  Detail

  HUŠEK, M.; KALA, J.; KRÁL, P.; HOKEŠ, F. Concept and Numerical Simulations of a Reactive Anti-Fragment Armour Layer. In 14th International Conference of Numerical Analysis and Applied Mathematics. AIP conference proceedings. Rhodos, Řecko: 2016. p. 1-4. ISSN: 0094-243X.
  Detail

  HUŠEK, M.; HOKEŠ, F.; KALA, J.; KRÁL, P. A Simple Solution for Randomized Failure Modeling with the SPH Method. International Journal of Theoretical and Applied Mechanics, 2016, vol. 2016, no. 1, p. 253-258. ISSN: 2367-8992.
  Detail | WWW

  HUŠEK, M.; KALA, J.; HOKEŠ, F.; KRÁL, P. How to Handle Irregular Distribution of SPH Particles in Dynamic Fracture Analysis. International Journal of Theoretical and Applied Mechanics, 2016, vol. 2016, no. 1, p. 212-217. ISSN: 2367-8984.
  Detail | WWW

  HUŠEK, M.; KALA, J.; KRÁL, P.; HOKEŠ, F. Effect of the Support Domain Size in SPH Fracture Simulations. International Journal of Mechanics, 2016, vol. 10, no. 1, p. 396-402. ISSN: 1998-4448.
  Detail | WWW

  KRÁL, P. Testování odezvy nelineárních materiálových modelů betonu implementovaných ve výpočetním systému LS- dyna. In Juniorstav 2016. Brno: Vysoké Učení Technické v Brně, 2016. p. 1-7. ISBN: 978-80-214-5311- 1.
  Detail

  KRÁL, P.; HRADIL, P. Studie vlivu redukce návrhového vektoru na výsledky inverzní identifikace parametrů nelineárního materiálového modelu betonu. In 24th SVSFEM ANSYS User´ s Meeting and Conference 2016. Dolní Morava, Česká republika: 2016. p. 102-110. ISBN: 978-80-905525-3- 1.
  Detail | WWW

  HOKEŠ, F.; KALA, J.; HUŠEK, M.; KRÁL, P. Parameter Identification for a Multivariable Nonlinear Constitutive Model inside ANSYS Workbench. In World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, WMCAUS 2016. Procedia Engineering. Praha, Česká republika: Elsevier, 2016. p. 892-897. ISSN: 1877-7058.
  Detail | WWW | Full text in the Digital Library

  WALD, F.; ŠABATKA, L.; BAJER, M.; BARNAT, J.; GÖDRICH, L.; HOLOMEK, J.; KABELÁČ, J.; KOČKA, M.; KOLAJA, D.; KRÁL, P.; KUREJKOVÁ, M.; VILD, M. Benchmark cases for advanced design of structural steel connections. Praha: Česká technika - nakladatelství ČVUT, 2016. 187 p. ISBN: 978-80-01-05826- 8.
  Detail

  KRÁL, P.; HRADIL, P.; KALA, J. INVERZNÍ IDENTIFIKACE MATERIÁLOVÝCH PARAMETRŮ KONSTITUTIVNÍHO MODELU URČENÉHO PRO MODELOVÁNÍ BETONU. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-11. ISBN: 978-80-248-3917- 2.
  Detail | WWW

  HOKEŠ, F.; HUŠEK, M.; KRÁL, P.; KALA, J. Numerical Simulation of Reinforced Concrete Beam with Utilization of Elasto- plastic Material Model of Concrete. WSEAS Transactions on Applied and Theoretical Mechanics, 2016, vol. 2016, no. 11, p. 136-141. ISSN: 2224-3429.
  Detail

• 2015

  KRÁL, P.; KALA, J.; HRADIL, P. Validation of the Response of Concrete Nonlinear Material Models Subjected to Dynamic Loading. In Proceedings of the 9th International Conference on Continuum Mechanics (CM '15). Energy, Environmental and Structural Engineering. Řím, Itálie: 2015. p. 182-185. ISBN: 978-1-61804-346- 7. ISSN: 2227-4359.
  Detail

  KRÁL, P.; HRADIL, P.; KALA, J. STUDIE ODEZVY NELINEÁRNÍCH MATERIÁLOVÝCH MODELŮ BETONU V ZÁVISLOSTI NA RYCHLOSTI DEFORMACE. In 23rd SVSFEM ANSYS Users' Group Meeting and Conference 2015. Hustopeče, Česká republika: 2015. p. 87-98. ISBN: 978-80-905525-2-4.
  Detail

  KRÁL, P.; HRADIL, P.; KALA, J. The effect of Strain Rate on the Response of Nonlinear Material Models of Concrete. Proc. Of International conference on Applied System Innovation. Osaka, Japonsko: 2015. p. 211-211.
  Detail

*) Publications are generated once a 24 hours.