Publications

• 2024

  SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J. Modeling Mechanical Properties of Titanium Scaffolds with Variable Microporosity. Advanced Engineering Materials, 2024, vol. 26, no. 19, p. 1-8. ISSN: 1527-2648.
  Detail | WWW

• 2023

  ŠEVEČEK, O.; SKALKA, P.; VENSKÝ, J.; KOTOUL, M.; PRÁŠEK, J.; STACHIV, I. Increasing Sensitivity of Mass Detection Using Nonlinear Micro/Nano-Mechanical Resonators. In Proceedings of IEEE Sensors 2023. The Seventh IEEE Conference on SENSORS. Vienna, Austria: Institute of Electrical and Electronics Engineers Inc., 2023. ISBN: 979-8-3503-0387-2. ISSN: 1930-0395.
  Detail | WWW

  VENSKÝ, J.; ŠEVEČEK, O.; SKALKA, P.; STACHIV, I.; KOTOUL, M. Novel approach for mass sensing using non-linear micromechanical resonators. 24th International Scientific Conference APPLIED MECHANICS 2023 Book of Abstracts. Bratislava, Slovakia: SPEKTRUM STU, Slovak university of Technology, 2023. ISBN: 978-80-227-5294-7.
  Detail | WWW

• 2022

  VENSKÝ, J.; ŠEVEČEK, O.; SKALKA, P.; KOTOUL, M.; STACHIV, I. Mass sensing using micromechanical resonators operating in nonlinear regime. In 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen, Czech Republic: IEEE, 2022. ISBN: 978-1-6654-1040-3.
  Detail | WWW

• 2021

  SKALKA, P.; KOTOUL, M. Determination of Mechanical and Fracture Properties of Silicon Single Crystal from Indentation Experiments and Finite Element Modelling. Materials, 2021, vol. 14, no. 22, p. 1-15. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

• 2020

  KOTOUL, M.; ŠEVEČEK, O.; LOŠÁK, P.; SKALKA, P. FEM analýza OK vodní turbíny s uvažováním zatížení dle CFD výpočtů pro zvolené provozní stavy. Brno: 2020.
  Detail

  ČELKO, L.; SKALKA, P.; SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; ROČŇÁKOVÁ, I.; ŠVEJCAR, J.; HOLEMÝ, D.; KAISER, J. The Influence of Surface Dipping and Bulk Filling Agents on Properties of High-Speed Grinding Wheels: Materialographic-Based Numerical Modelling. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. p. 43-47. ISSN: 1662-9507.
  Detail | WWW

  CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, vol. 46, no. 15, p. 24129-24136. ISSN: 0272-8842.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. A novel multiscale approach to brittle fracture of nano/micro-sized components. Fatigue & Fracture of Engineering Materials & Structures, 2020, vol. 43, no. 8, p. 1630-1645. ISSN: 8756-758X.
  Detail | WWW

  RAVASZOVÁ, S.; DVOŘÁK, K.; SKALKA, P.; CASAS LUNA, M.; ČELKO, L. SYNTHESIS AND PHYSICOCHEMICAL PROPERTIES OF AN ADVANCED BaO-MgO-Al2O3-SiO2 SYSTEM AS AN ATTRACTIVE PROTECTIVE-COATING MATERIAL. Materiali in tehnologije, 2020, vol. 54, no. 6, p. 873-877. ISSN: 1580-2949.
  Detail | WWW

  RAVASZOVÁ, S.; DVOŘÁK, K.; SKALKA, P.; CASAS LUNA, M.; JECH, D.; ČELKO, L. Syntéza a stanovenie fyzikálno-chemických vlastností pokročilého systému BAO-MGO-AL2O3-SIO2 ako ochranného náterového materiálu. JUNIORSTAV 2020. Brno: 2020. p. 606-611. ISBN: 978-80-86433-73-8.
  Detail

  MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; CASAS LUNA, M.; SKALKA, P.; RAMIREZ-CEDILLO, E.; ZBONČÁK, M.; KAISER, J.; ČELKO, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 2020, vol. 40, no. 14, p. 4923-4931. ISSN: 0955-2219.
  Detail | WWW | Full text in the Digital Library

• 2019

  SKALKA, P.; SLÁMEČKA, K.; MONTUFAR JIMENEZ, E.; ČELKO, L. Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing. Journal of the European Ceramic Society, 2019, vol. 39, no. 4, p. 1586-1594. ISSN: 0955-2219.
  Detail | WWW | Full text in the Digital Library

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; FRIÁK, M.; ŘEHÁK, P.; ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J. Ab Initio Aided Strain Gradient Elasticity Theory in Prediction of Nanocomponent Fracture. Mechanics of Materials, 2019, vol. 136, no. 9, p. 103074-1 (103074-10 p.)ISSN: 0167-6636.
  Detail | WWW

• 2018

  KOTOUL, M.; SKALKA, P.; PROFANT, T.; ŘEHÁK, P.; ŠESTÁK, P.; FRIÁK, M. Prediction of the Critical Energy Release Rate of Nanostructured Solids using the Laplacian Version of the Strain Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics XVII. Key Engineering Materials (CD). Scientific Net, 2018. p. 447-452. ISSN: 1662-9809.
  Detail

  SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. Surface and Coatings Technology, 2018, vol. 337, no. 1, p. 321-334. ISSN: 0257-8972.
  Detail | WWW

• 2017

  ŠEVEČEK, O.; NAVRÁTIL, P.; PAPŠÍK, R.; SKALKA, P.; KOTOUL, M. Influence of the Ceramic Foam Structure Irregularity on the Tensile Response. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Švýcarsko: Trans Tech Publications, 2017. p. 161-164. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
  Detail

  ŠEVEČEK, O.; SKALKA, P.; KOTOUL, M. Modelling of the ceramic foam behaviour upon tensile loading. Greece: 2017. p. 859-860.
  Detail | WWW

  KOTOUL, M.; SKALKA, P. Applicability of the critical energy release rate for predicting the growth of a crack in nanoscale materials applying the strain gradient elasticity theory. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Švýcarsko: Trans Tech Publications Ltd, 2017. p. 185-188. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
  Detail | WWW

  KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; SKALKA, P.; REMEŠOVÁ, M.; ČELKO, L. Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS, 2017, no. 82, p. 776-782. ISSN: 1350-6307.
  Detail | WWW

  KOTOUL, M.; SKALKA, P.; ŠEVEČEK, O.; BERTOLLA, L.; MERTENS, J.;MARCIÁN, P.; CHAWLA, N. Crack bridging modelling in Bioglass ®based scaffolds reinforced by poly-vinyl alcohol/ microfibrillated cellulose composite coating. Mechanics of Materials, 2017, vol. 110, no. 1, p. 16-28. ISSN: 0167-6636.
  Detail | WWW

  KOTOUL, M.; SKALKA, P. Computational analysis of crack bridging in Bioglass®–based porous scaffolds by using polymer coatings. In Materials Structure and Micromechanics of Fracture VIII. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 325-328. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
  Detail

• 2016

  SLÁMEČKA, K.; SKALKA, P.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. Surface and Coatings Technology, 2016, vol. 304, no. 1, p. 574-583. ISSN: 0257-8972.
  Detail | WWW

  SLÁMEČKA, K.; SKALKA, P.; JECH, D.; KLAKURKOVÁ, L.; ČELKO, L. Critical Locations in Plasma Sprayed Thermal Barrier Coatings Due to Irregularities of Bond Coat Surface. In New Trends on Integrity Reliability Failure. Porto- Portugal: FEUP- INEGI, 2016. p. 387-388. ISBN: 978-989-98832-4- 6.
  Detail

  SLÁMEČKA, K.; SKALKA, P.; ČELKO, L.; POKLUDA, J.; SAUCEDO-MORA, L.; MARROW, T.; THANDAVAMOORTHY, U. Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution. Frattura ed Integrita Strutturale, 2016, vol. 10, no. 35, p. 322-329. ISSN: 1971-8993.
  Detail | WWW | Full text in the Digital Library

  SKALKA, P.; NAVRÁTIL, P.; KOTOUL, M. Novel approach to FE solution of crack problems in the Laplacian-based gradient elasticity. Mechanics of Materials, 2016, vol. 95, no. 1, p. 28-48. ISSN: 0167-6636.
  Detail | WWW | Full text in the Digital Library

• 2015

  SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. INTERNATIONAL JOURNAL OF FATIGUE, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.
  Detail

  KOTOUL, M.; SKALKA, P.; DLOUHÝ, I. Crack Bridging Modelling in Bioglass® Based Scaffolds Using Gradient Elasticity Theory. In Advances in Fracture and Damage Mechanics. Key Engineering Materials (print). Pfaffikon, Switzerland: Trans Tech Publications, 2015. p. 105-108. ISSN: 1013-9826.
  Detail | WWW

  SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. Surface and Coatings Technology, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.
  Detail

• 2014

  MARCIÁN, P.; BORÁK, L.; NARRA, N.; SKALKA, P.; KAISER, J.; WOLFF, J. An Algorithm for Computational Simulation of Mandible Bone Modeling and Remodeling Around Dental Implants. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 388-391. ISBN: 978-80-214-4871-1.
  Detail

  SKALKA, P.; SOBOTKA, J. ANALYSIS OF DYNAMIC LOADING OF BAR STRAIGHTENING MACHINE COMPONENTS. In Engineering mechanics 2014. 1. Svratka: BUT, 2014. p. 564-567. ISBN: 978-80-214-4871-1.
  Detail

• 2013

  ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.
  Detail

• 2012

  NAVRÁTIL, P.; SKALKA, P.; DAMBORSKÝ, P.; KOTOUL, M. Crack propagation in railway wheel rim in a case of rectilinear ride. In Crack Path. 2012. p. 1007-1014. ISBN: 9788895940441.
  Detail

• 2007

  SKALKA, P.; PETRUŠKA, J.; JANÍČEK, P. Numerical analysis of fracture during the process of cold drawing of bars. In 11th International Scientific Seminar on Developments in Machinery Design and Control. BYDGOSZCZ BRANCH: POLISH SOCIETY OF MECHANICAL ENGINEERS AND TECHNICIANS, 2007. p. 83-84. ISBN: 83-87982-42- 3.
  Detail

  SKALKA, P.; JANÍČEK, P.; PETRUŠKA, J.; MAROŠ, B. NUMERICAL PREDICTION OF CENTRAL BURSTING IN AXISYMMETRIC COLD DRAWING OF BRASS BAR. In Engineering Mechanics 2007. Svratka: ÚT AV ČR Praha, 2007. p. 249 ( p.)ISBN: 978-80-87012-06- 2.
  Detail

• 2006

  SKALKA, P.; PETRUŠKA, J.; JANÍČEK, P. Posouzení vlivu lisování lamel brzdných odporníků na jejich provozní spolehlivost. In Developments in Machinery design and control. Bycgoszcz: Uviv. of Technology Bydgoszcz, 2006. p. 1-6. ISBN: 83-87982-96- 2.
  Detail

• 2005

  SKALKA, P.; PETRUŠKA, J.; JANÍČEK, P. Vliv zbytkových napětí od lisování na deformační stabilitu lamel brzdných odporníků trakčních vozidel. In Výpočty konstrukcí metodou konečných prvků. Plzeň: Západočeská univerzita v Plzni, 2005. p. 107-114. ISBN: 80-7043-419- 8.
  Detail

  JANÍČEK, P.; SKALKA, P.; BURŠA, J.; PEŠLOVÁ, F. Výpočtové modelování deformační stability plechů odporníků elektrických lokomotiv. In Dynamic of Civil Engineering and Transport Structures and Wind Enginering. Žilina: University of Zilina, 2005. p. 136 ( p.)ISBN: 80-8070-382- 5.
  Detail

  JANÍČEK, P.; SKALKA, P.; PETRUŠKA, J.; PEŠLOVÁ, F. Jak ovlivňují zbytková napětí od lisování deformační stabilitu lamel brzdných odporníků trakčních vozidel. Strojírenská technologie, 2005, vol. 10, no. zvláštní, p. 74-80. ISSN: 1211- 4162.
  Detail

  SKALKA, P.; JANÍČEK, P.; FUIS, V.; PETRUŠKA, J.; PEŠLOVÁ, F. Buckling of dynamic brake resistor grid component. In Engineering Mechanics 2005. Svratka: Institute of Mechanics, Academy of Sciences of the Czech Republic, 2005. p. 279-280. ISBN: 80-85918-93- 5.
  Detail

  SKALKA, P.; JANÍČEK, P.; FUIS, V.; PETRUŠKA, J.; PEŠLOVÁ, F. Boulení tenkých plechů odporníků elektrických lokomotiv. In Aplikovaná mechanika 2005. Hrotovice: Ústav mechaniky těles, mechatroniky a biomechaniky, Fakulta strojního inženýrství, Vysoké učení technické v Brně, 2005, 2005. p. 37-43. ISBN: 80-214-2373- 0.
  Detail

• 2004

  PETRUŠKA, J., JANÍČEK, L., ŠUTA, J., SKALKA, P. Identification of material damage in cold forming. In Danubia- Adria Symposium. Brijuni: Croatian society of mechanics, 2004. p. 220 ( p.)ISBN: 953-96243-6- 3.
  Detail

  PETRUŠKA, J., SKALKA, P., JANÍČEK, L., RUSZ, S. Computational simulation of cold forming of bolts and prediction of material damage during the process. In Engineering mechanics 2004. Svratka: Ústav termomechaniky AV ČR, 2004. p. 235 ( p.)ISBN: 80-85918-88- 9.
  Detail

  JANÍČEK, P., PEŠLOVÁ, F., FUIS, V., SKALKA, P., KVAPIL, F. Posouzení mezních stavů odporníků lokomotiv. In TechMat 04. Česká Třebová: Univerzita Pardubice, 2004. p. 133 ( p.)ISBN: 80-7194-707- 5.
  Detail

*) Publications are generated once a 24 hours.