Serhii Tkachenko

Ph.D.

CEITEC, RG-2-05 – Researcher

+420 54114 9203, +420 54114 9706
Serhii.Tkachenko@ceitec.vutbr.cz

Send BUT message

Serhii Tkachenko, Ph.D.

Publications

  • 2024

    CIHLÁŘ, J.; TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; CIHLÁŘ, J.; ČÁSTKOVÁ, K.; TRUNEC, M.; ČELKO, L. Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane. Gels, 2024, vol. 10, no. 5, ISSN: 2310-2861.
    Detail | WWW

    TKACHENKO, S.; OLIVER URRUTIA, C.; KSENZOVA, O.; SLÁMEČKA, K.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; BALÁŽ, M.; DEÁK, A.; MONTUFAR JIMENEZ, E.; ČELKO, L. Production of spherical Mo and Mo-Si powders by spray drying of Si suspension in a water-soluble Mo precursor. ADVANCED POWDER TECHNOLOGY, 2024, vol. 35, no. 1, ISSN: 0921-8831.
    Detail | WWW

  • 2023

    SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. ISSN: 1742-6588.
    Detail | WWW

    TKACHENKO, S.; SLÁMEČKA, K.; OLIVER URRUTIA, C.; KSENZOVA, O.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; DVOŘÁK, K.; BALÁŽ, M.; DEÁK, A.; KACHLÍK, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology, 2023, vol. 27, no. 10, p. 2475-2489. ISSN: 2238-7854.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; BEDNAŘÍKOVÁ, V.; KSENZOVA, O.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CIHLÁŘ, J.; BALÁŽ, M.; DEÁK, A.; ČELKO, L. Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method. Journal of Alloys and Compounds, 2023, vol. 964, no. 11.6.2023, ISSN: 0925-8388.
    Detail | WWW

  • 2022

    TKACHENKO, S.; ČELKO, L.; REMEŠOVÁ, M.; BEDNAŘÍKOVÁ, V.; DVOŘÁK, K.; KOMAROV, P.; ZÁBRANSKÝ, K. Microstructure of Mo-La2O3 Composite Powder Prepared Using Two Different High Energy Ball Milling Systems. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 109-114. ISSN: 1012-0394.
    Detail | WWW

    TKACHENKO, S.; BRODNIKOVSKYI, D.; ČÍŽEK, J.; KOMAROV, P.; BRODNIKOVSKYI, Y.; TYMOSHENKO, Y.; CSAKI, S.; PINCHUK, M.; VASYLYEV, O.; ČELKO, L.; GADZYRA, M.; ; CHRÁSKA, T.;. Novel Ti-Si-C composites for SOFC interconnect materials: Production optimization. CERAMICS INTERNATIONAL, 2022, vol. 48, no. 19, p. 27785-27798. ISSN: 1873-3956.
    Detail | WWW

    ČELKO, L.; TKACHENKO, S.; CASAS LUNA, M.; DYČKOVÁ, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; KOMAROV, P.; DEÁK, A.; BALÁŽ, M.; CRAWFORD, D.; DÍAZ DE LA TORRE, S.; BODOKI, E.; CIHLÁŘ, J. High-energy ball milling and spark plasma sintering of molybdenum - lanthanum oxide (Mo-La2O3) and molybdenum - lanthanum zirconate (Mo-La2Zr2O7) composite powders. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, vol. 102, no. 1, p. 1-13. ISSN: 0263-4368.
    Detail | WWW | Full text in the Digital Library

    KASHIMBETOVA, A.; TKACHENKO, S.; REMEŠOVÁ, M.; MATA-LEIJA, A.; GEJDOŠ, P.; ČELKO, L.; MONTUFAR JIMENEZ, E. Correlating the Microstructure with the Mechanical Behaviour of Titanium Structures Produced by Robotic Assisted Deposition. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. p. 26-30. ISSN: 1012-0394.
    Detail | WWW

  • 2021

    KASHIMBETOVA, A.; TKACHENKO, S.; SLÁMEČKA, K.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; PAVLOUŠKOVÁ, Z.; ČELKO, L.; MONTUFAR JIMENEZ, E. Extrusion, Debinding and Sintering of a Commercial Pure Titanium Ink for Robocasting. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1215-1221. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; KASHIMBETOVA, A.; GEJDOŠ, P.; OLIVER-URRUTIA, C.; CASAS LUNA, M.; JULIŠ, M.; MONTUFAR JIMENEZ, E.; ČELKO, L. Effects of the Heat Treatment Temperature on Composition, Microstructure and In Vitro Mineralization of Alkali Treated Titanium. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1186-1191. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

    KOMAROV, P.; JECH, D.; TKACHENKO, S.; SLÁMEČKA, K.; DVOŘÁK, K.; ČELKO, L. Wetting Behavior of Wear-Resistant WC-Co-Cr Cermet Coatings Produced by HVOF: The Role of Chemical Composition and Surface Roughness. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, no. 9, p. 1-19. ISSN: 1059-9630.
    Detail | WWW

    HERNANDEZ TAPIA, L.; CARRANZA-TREJO, A.; KASHIMBETOVA, A.; TKACHENKO, S.; KOLEDOVÁ, Z.; KOUTNÝ, D.; MALÝ, M.; ČELKO, L.; MONTUFAR JIMENEZ, E. Microstructure of Selective Laser Melted Titanium Lattices and In Vitro Cell Behaviour. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. p. 1179-1185. ISBN: 978-80-87294-99-4.
    Detail | WWW | Full text in the Digital Library

  • 2020

    MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 2020, vol. 36, no. 101516, p. 1-13. ISSN: 2214-8604.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, vol. 384, no. 125328, p. 1-13. ISSN: 0257-8972.
    Detail | WWW

    SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 2020, vol. 513, no. 145780, p. 1-10. ISSN: 0169-4332.
    Detail | WWW

    ČELKO, L.; JECH, D.; TKACHENKO, S.; KOMAROV, P.; REMEŠOVÁ, M.; SLÁMEČKA, K.; CTIBOR, P. Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Sisicate Attack. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. p. 360-365. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2019

    JECH, D.; REMEŠOVÁ, M.; KOMAROV, P.; TKACHENKO, S.; ČESÁNEK, Z.; SCHUBERT, J.; HOUDKOVÁ, Š.; ČELKO, L. Evaluation of Microstructure, Phase Composition and Hardness of Alternative Abradable Ceramic Coating Systems Produced by Means of Atmospheric Plasma Spraying. In Binders, Materials and Technologies in Modern Construction V. Solid State Phenomena. Switzerland: Trans Tech Publications, 2019. p. 161-166. ISBN: 978-3-0357-1550-7. ISSN: 1662-9779.
    Detail

    TORRES RODRÍGUEZ, J.; GUTIÉRREZ CANO, V.; MENELAOU, M.; KAŠTYL, J.; CIHLÁŘ, J.; TKACHENKO, S.; GONZÁLEZ, J.; KALMÁR, J.; FÁBIÁN, I.; LÁZÁR, I.; ČELKO, L.; KAISER, J. Rare-Earth Zirconate Ln2Zr2O7 (Ln: La, Nd, Gd, and Dy) Powders, Xerogels, and Aerogels: Preparation, Structure, and Properties. Inorganic Chemistry, 2019, vol. 1, no. 1, p. 14467-14477. ISSN: 1520-510X.
    Detail | WWW

    CASAS LUNA, M.; TAN, H.; TKACHENKO, S.; SALAMON, D.; MONTUFAR JIMENEZ, E. Enhancement of mechanical properties of 3D-plotted tricalcium phosphate scaffolds by rapid sintering. Journal of the European Ceramic Society, 2019, vol. 39, no. 14, p. 4366-4374. ISSN: 0955-2219.
    Detail | WWW

  • 2018

    TKACHENKO, S.; ČÍŽEK, J.; MUŠÁLEK, R.; DVOŘÁK, K.; SPOTZ, Z.; MONTUFAR JIMENEZ, E.; CHRÁSKA, T.; KŘUPKA, I.; ČELKO, L. Metal matrix to ceramic matrix transition via feedstock processing of SPS titanium composites alloyed with high silicone content. Journal of Alloys and Compounds, 2018, vol. 764, no. 1, p. 776-788. ISSN: 0925-8388.
    Detail | WWW | Full text in the Digital Library

    MONTUFAR JIMENEZ, E.; CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; FOHLEROVÁ, Z.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J. High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures. Acta Biomaterialia, 2018, no. 70, p. 293-303. ISSN: 1742-7061.
    Detail | WWW | Full text in the Digital Library

    TORRES RODRÍGUEZ, J.; CASAS LUNA, M.; TKACHENKO, S. Influence of Surfactants on SiO2 Aerogels. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2018. p. 1135-1140. ISBN: 978-80-87294-79-6.
    Detail

    CASAS LUNA, M.; TKACHENKO, S.; KLAKURKOVÁ, L.; TORRES RODRÍGUEZ, J.; ZIKMUND, T. Micro-Computed Tomography of Interconnected Mg-TCP Composites Obtained by Current Assisted Metal Infiltration. In Metal 2017 Conference Prosceedings. Ostrava: TANGER Ltd., 2018. p. 1669-1675. ISBN: 978-80-87294-79-6.
    Detail

    CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; KLAKURKOVÁ, L.; ČELKO, L.; DÍAZ DE LA TORRE, S.; MONTUFAR JIMENEZ, E. Chemical stability of tricalcium phosphate - iron composite during spark plasma sintering. Journal of Composites Science, 2018, vol. 2, no. 3, p. 1-8. ISSN: 2504-477X.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; HORYNOVÁ, M.; CASAS LUNA, M.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Strength and fracture mechanism of iron reinforced tricalcium phosphate cermet fabricated by spark plasma sintering. Journal of the mechanical behavior of biomedical materials, 2018, vol. 1, no. 81, p. 16-25. ISSN: 1751-6161.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, vol. 412-413, no. 1, p. 49-59. ISSN: 0043-1648.
    Detail | WWW | Full text in the Digital Library

  • 2017

    CASAS LUNA, M.; TKACHENKO, S.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. Acta Metallurgica Sinica (English Letters), 2017, vol. 30, no. 4, p. 319-325. ISSN: 1006-7191.
    Detail | WWW | Full text in the Digital Library

    TKACHENKO, S.; DATSKEVICH, O.; SPOTZ, Z.; DVOŘÁK, K.; KULAK, L.; ČELKO, L. Oxidation of Experimental Ti-Si-Al Based Alloys. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. p. 391-394. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.
    Detail | WWW

    TKACHENKO, S.; DATSKEVICH, O.; DVOŘÁK, K.; SPOTZ, Z.; KULAK, L.; ČELKO, L. Isothermal oxidation behavior of experimental Ti-Al-Si alloys at 700 °C in air. Journal of Alloys and Compounds, 2017, vol. 694, no. 1, p. 1098-1108. ISSN: 0925-8388.
    Detail | WWW

  • 2016

    TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological Performance of Ti-Si-Based in Situ Composites. TRIBOLOGY TRANSACTIONS, 2016, vol. 59, no. 2, p. 340-351. ISSN: 1040-2004.
    Detail | WWW

  • 2014

    TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R. Tribological behavior of Ti–Si based in situ composites under sliding. In Metal 2014. Ostrava: Tanger Ltd., 2014. p. 2704-2709. ISBN: 978-80-87294-52-9.
    Detail | WWW

*) Publications are generated once a 24 hours.