Publications

• 2023

  KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; RESL, O.; KOMÍNEK, J.; LUKS, T. The Efficient Way to Design Cooling Sections for Heat Treatment of Long Steel Products. Materials, 2023, vol. 16, no. 11, p. 1-13. ISSN: 1996-1944.
  Detail | WWW | Full text in the Digital Library

• 2021

  BELLEROVÁ, H.; LUKS, T.; RAUDENSKÝ, M.; RESL, O. HEAT TRANSFER COEFFICIENT DURING SPRAY COOLING OF VERY HOT SURFACES BY FLAT NOZZLES. Italy: Associazione Italiana di Metallurgia, 2021. p. 1-10. ISBN: 978-88-98990-24-5.
  Detail

  KOMÍNEK, J.; LUKS, T.; POHANKA, M.; HWANG, J. Y. Influence of Segmented Rolls on Homogeneity of Cooling in Continuous Casting. Metals, 2021, vol. 11, no. 8, p. 1-11. ISSN: 2075-4701.
  Detail | WWW | Full text in the Digital Library

• 2020

  KOTRBÁČEK, P.; BELLEROVÁ, H.; LUKS, T.; RAUDENSKÝ, M. Heat Transfer Correlations for Secondary Cooling in Continuous Casting. STEEL RESEARCH INTERNATIONAL, 2020, vol. 11, no. 1, p. 1-8. ISSN: 1611-3683.
  Detail | WWW

• 2018

  KOMÍNEK, J.; LUKS, T.; POHANKA, M.; RAUDENSKÝ, M.; HWANG, J-Y. SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER. In Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3.
  Detail

  KOTRBÁČEK, P.; LUKS, T.; HORSKÝ, J. Měření chladících účinků trysek sekundárního chlazení ZPO. In Odborná konferencia ŽP VVC 2018 Zborník príspevkov. Brezno: ŽP Výskumno-vývojové centrum s.r.o., 2018. p. 65-70. ISBN: 978-80-973141-0-1.
  Detail

  KOTRBÁČEK, P.; LUKS, T.; RAUDENSKÝ, M. Měření chladicích účinků trysek sekundárního chlazení ZPO. Hutnické listy, 2018, vol. LXXI, no. 6, p. 126-130. ISSN: 0018-8069.
  Detail | WWW

• 2016

  BROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces, by Pulsating Pressure Loads. In Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 3-9. ISBN: 978-3-03835-700- 1. ISSN: 1660- 9336.
  Detail

  LUKS, T.; RAUDENSKÝ, M.; KVAPIL, J.; KOMÍNEK, J. Thermal contact conductance. 2016. p. 1-37.
  Detail

• 2015

  BROŽOVÁ, T.; LUKS, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces, by Pulsating Pressure Loads. In ENGINEERING MECHANICS 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 30-31. ISBN: 978-80-86246-42- 0. ISSN: 1805- 8248.
  Detail | WWW

  KOTRBÁČEK, P.; HORSKÝ, J.; LUKS, T.; POHANKA, M. NUMERICAL SIMULATION AND VERIFICATION OF ROLL, TEMPERATURE HISTORY DURING ROLLING CAMPAIGN. Roll5 2015. London, United Kingdom: IOM Communicatiins Ltd, 2015. p. 1-11.
  Detail

  LUKS, T.; HORSKÝ, J.; BARTULI, E. Experimentální stanovení teplotních a silových poměrů ve válcovací mezeře. Hutnické listy, 2015, vol. LXVIII, no. 4, p. 9-14. ISSN: 0018- 8069.
  Detail

• 2014

  LUKS, T.; HORSKÝ, J.; NILSSON, A.; JONSSONS, N.; LAGERGREN, J. Contact stress distribution and roll surface temperature in the roll gap analyzed with different sensors. La Metallurgia Italiana, 2014, vol. 160, no. 1, p. 19-25. ISSN: 0026-0843.
  Detail

  KOTRBÁČEK, P.; LUKS, T.; HŘIBOVÁ, V. Cooling efficiency of the nozzles. 2014. p. 1-20.
  Detail

• 2013

  LEGRAND, N.; WEISZ-PATRAULT, D.; HORSKY, J.; LUKS, T.; LABBE, N.; PICARD, M.; EHRLACHER, A. Characterization of roll bite heat transfers in hot steel strip rolling and their influence on roll thermal fatigue degradation. In 16th ESAFORM Conference on Material Forming. Key Engineering Materials (print). SWITZERLAND: TRANS TECH PUBLICATIONS LTD, 2013. p. 1555-1569. ISBN: 9783037857199. ISSN: 1013-9826.
  Detail | WWW

  HORSKÝ, J.; LUKS, T.; POHANKA, M.; KVAPIL, J. Thermal and friction sensors for roll-gap - development. 2013. p. 1-30.
  Detail

• 2012

  WEISZ-PATRAULT, D.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T.; EHRLACHER, A. Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouples (fuly embedded) during Hot Steel Strip Rolling. Advanced Materials Research, 2012, vol. 452- 453, no. 3, p. 959-963. ISSN: 1022- 6680.
  Detail | WWW

  LEGRAND, N.; LABBE, N.; WEISZ-PATRAULT, D.; EHRLACHER, A.; LUKS, T.; HORSKÝ, J. Analysis of roll gap heat transfers in hot steel strip rolling through roll temperature sensors and heat transfer models. Key Engineering Materials (print), 2012, vol. 504- 506, no. 2, p. 1043-1048. ISSN: 1013- 9826.
  Detail | WWW

  HORSKÝ, J.; RAUDENSKÝ, M.; LUKS, T. Thermal Load and Fatigue of Rolls in Hot Rolling. In 2012 AISTech Conference Proceedings. AIST Association for Iron& Steel Technology. Atlanta (GA, U.S.A.): AISTech 2012, 2012. p. 2149-2157. ISBN: 978-1-935117-24- 7. ISSN: 1551-6997.
  Detail

  ONDROUŠKOVÁ, J.; LUKS, T.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. EPJ Web of Conferences, 2012, vol. 25, no. 4, p. 1-10. ISSN: 2100-014X.
  Detail | WWW | Full text in the Digital Library

  WEISZ-PATRAULT, D.; EHRLACHER, A.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T. Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple (fully embedded) during hot steel strip rolling. In 2011 International Conference on Management, Manufacturing and Materials Engineering. Advanced Materials Research. 2012. p. 959-963. ISBN: 9783037853511. ISSN: 1022-6680.
  Detail

• 2011

  LUKS, T.; ONDROUŠKOVÁ, J.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. In Experimental fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011. p. 337-346. ISBN: 978-80-7372-784- 0.
  Detail

*) Publications are generated once a 24 hours.