Czech Science Foundation - Standardní projekty

- part funder (2012-01-01 - 2014-12-31)

GAP107/12/1922

Czech

Švejcar Jiří, prof. Ing., CSc. - principal person responsible

Advanced Coatings
- beneficiary (2012-01-01 - not assigned)

OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; ČELKO, L.; PODRÁBSKÝ, T. Effect of Plasma sprayed AlSi coating on low cycle fatigue properties of cast superalloy Inconel 738LC. In METAL 2012 Conference proceedings. 1. Ostrava: TANGER Ltd., 2012. p. 1013-1018. ISBN: 978-80-87294-29-1.
Detail

ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; ZIKMUND, T.; NOVOTNÝ, K.; ČELKO, L.; KLAKURKOVÁ, L.; KAISER, J. Assessment of Magnesium Biodegradability by Micro-CT Platform. In 27th European Conference on Biomaterials - ESB 2015. 1000. Kraków, Poland: Polish Society for Biomaterials, 2015. p. 394-394. ISBN: 978-83-63663-63-6.
Detail

POKLUDA, J.; OBRTLÍK, K.; SLÁMEČKA, K.; HORNÍKOVÁ, J.; HUTAŘOVÁ, S.; KIANICOVÁ, M.; PODRÁBSKÝ, T. Fatigue Crack Paths in Cast Inconel 713LC with/without Al Diffusion Coating under Various Loading and Temperature Conditions. In Proceedings of the 4th International Conference on Crack Paths. 2012. s. 967-975. ISBN: 9788895940441.
Detail

JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural stability of plasma sprayed CoNiCrAlY – ZrO2+Y2O3 thermal barrier coatings after isothermal exposure at 1050 C. In Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 1015-1020. ISBN: 978-80-87294-41-3.
Detail

JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 82-82. ISBN: 978-80-553-1412-9.
Detail

JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S.; JULIŠ, M.; ŠVEJCAR, J. Structural Stability of Plasma Sprayed CoNiCrAlY – ZrO2+Y2O3 Thermal Barrier Coatings After Isothermal Exposure at 1050 C. Metal 2013. 1. Ostrava: TANGER Ltd., 2013. p. 73-73. ISBN: 978-80-87294-39-0.
Detail

ŘIČÁNKOVÁ, V.; ČELKO, L.; ŠVEJCAR, J. Investigation of Changes in Microstructure of Remelted Air Plasma Sprayed NiCrAlY Coating after Thermal Exposure in Air with the Assistance of Microhardness Measurements. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 226-229. ISBN: 9783037859346. ISSN: 1013-9826.
Detail

SLÁMEČKA, K.; NĚMEC, K.; ČELKO, L.; HORNÍKOVÁ, J.; POKLUDA, J.; ŠVEJCAR, J. Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 716-719. ISBN: 9783037859346. ISSN: 1013-9826.
Detail

PODRÁBSKÝ, T.; JULIŠ, M.; ČELKO, L.; KLAKURKOVÁ, L.; HUTAŘOVÁ, S. Phase Analysis of Aluminide Diffusion Coatings Produced ba Aluminizing of Nickel and Nickel-Based Alloys. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 74-74.
Detail

ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterisations of Slurry Aluminide Diffusion Coatings. Slovakia: Department of Material Science, Faculty of Metallurgy, Technical University of Košice, 2013. p. 83-83. ISBN: 978-80-553-1412-9.
Detail

HUTAŘOVÁ, S.; OBRTLÍK, K.; JULIŠ, M.; ČELKO, L.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Degradation of TBC Coating during Low-cycle Fatigue Tests at High Temperature. In Key Engineering Materials. Key Engineering Materials (print). Zurich-Durnten, Switzerland: Trans Tech Publications Ltd, 2014. p. 461-464. ISBN: 9783037859346. ISSN: 1013-9826.
Detail

KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; JULIŠ, M.; JULIŠOVÁ, M.; ŠVEJCAR, J. Formation and Morphology of Intermetallic Phases and Eutectic in Iron Coated Thick Aluminium Substrates. YUCOMAT 2013, The Book of Abstracts. Belgrade, Serbia: Materials Research Society of Serbia, 2013. p. 73-73.
Detail

ČELKO, L.; JECH, D.; SKALKA, P.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; ŠVEJCAR, J. Microstructural Characterization of Thermally Grown Oxide in Atmospheric Plasma Sprayed Thermal Barier Coatings. ICCE-21, Tenerife, Proceedings. 1. Spain: Universidad de La Laguna, 2013. p. 1-2.
Detail

JECH, D.; ČELKO, L.; JULIŠ, M.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; OBRTLÍK, K.; ŠVEJCAR, J. Critical Weak Points of Atmospheric Plasma Sprayed Thermal Barrier Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publication, 2014. p. 567-572. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
Detail

ČELKO, L.; HUTAŘOVÁ, S.; OBRTLÍK, K.; PETRENEC, M.; JULIŠOVÁ, M.; PODRÁBSKÝ, T. Microstructural Characterization of Slurry Aluminide Diffusion Coatings. In Metallography XV. Materials Science Forum. Switzerland: Trans Tech Publications, 2014. p. 584-589. ISBN: 978-3-03835-072-9. ISSN: 0255-5476.
Detail

OBRTLÍK, K.; HUTAŘOVÁ, S.; ČELKO, L.; JULIŠ, M.; PODRÁBSKÝ, T.; ŠULÁK, I. Effect of thermal barrier coating on low cycle fatigue behavioir of cast Inconel 713LC at 900 oC. In Advanced Materials Research. Advanced Materials Research. Switzerland: Trans Tech Publications, 2014. p. 848-853. ISSN: 1022-6680.
Detail

JECH, D.; ČELKO, L.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Microstructural Changes of Plasma Sprayed Al2O3-SiO2-ZrO2 Thermal Barrier Coatings After Isothermal Exposure. Paris: SAMPE, 2014.
Detail

SLÁMEČKA, K.; ČELKO, L.; SKALKA, P.; POKLUDA, J.; NĚMEC, K.; JULIŠ, M.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. INTERNATIONAL JOURNAL OF FATIGUE, 2015, vol. 70, no. 1, p. 186-195. ISSN: 0142-1123.
Detail

SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. Surface and Coatings Technology, 2015, vol. 274, no. 1, p. 26-36. ISSN: 0257-8972.
Detail

JECH, D.; ČELKO, L.; CHRÁSKA, T.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; DUBSKÝ, J.; ŠVEJCAR, J. Influence of Isothermal Exposure on Microstructural Changes Resulting in Delamination of Eutectic Al2O3+ZrO2+SiO2 Thermal Barrier Coating. In Metal 2014. 1. Ostrava: TANGER Ltd., 2014. p. 885-890. ISBN: 978-80-87294-54-3.
Detail

ČELKO, L.; JECH, D.; CHRÁSKA, T.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; SPOTZ, Z.; DUBSKÝ, J.; ŠVEJCAR, J. Formation and Growth of Thermally Grown Oxide in Two Different Atmospheric Plasma Sprayed Thermal Barrier Coating Systems. ICCE-22, Saint Julian´s, Malta, Proceedings. 22. Saint Julian´s, Malta: International Community for composites/Nano Engineering, 2014. p. 145-146.
Detail

HORYNOVÁ, M.; ČELKO, L.; JECH, D.; KLAKURKOVÁ, L.; ŠVEJCAR, J. Formation of Aluminide Diffusion Coatings by powder Mixture CVD Process. Saint Julian´s, Malta: International Community for composites/Nano Engineering, 2014. p. 603-604.
Detail

OBRTLÍK, K.; HUTAŘOVÁ, S.; JULIŠ, M.; PODRÁBSKÝ, T.; KRUML, T. Influence of Al-Cr diffusion coating on low cycle fatigue behavior of cast nickel-base superalloy at 800 C. In 19th European Conference on Fracture. Russia: Kazan, 2012. p. 1-7. ISBN: 978-5-905576-18-8.
Detail