Project detail
Komplexní analýza zkoušky štípáním klínem na válcových tělesech z kvazikřehkého materiálu
Duration: 1.3.2016 — 28.2.2017
Funding resources
Vysoké učení technické v Brně - Vnitřní projekty VUT
On the project
Projekt je zaměřen na provedení a vyhodnocení rozsáhlé experimentální kampaně zkušebního lomového testu štípáním klínem na již vyrobených válcových tělesech. Numerická kampaň je nezbytností pro včasnou predikci porušování těles a následné ověření materiálových modelů. Součástí projektu je i zkoušení těles pomocí odrazového tvrdoměru a vyhodnocení tvarových funkcí a funkcí odezvy pomocí nástrojů víceparametrové lineární elastické lomové mechaniky.
Mark
FAST-S-16-3475
Default language
Czech
People responsible
Sobek Jakub, Ing., Ph.D. - principal person responsible
Holušová Táňa, Ing., Ph.D. - fellow researcher
Klon Jiří, Ing. - fellow researcher
Seitl Stanislav, doc. Ing., Ph.D. - fellow researcher
Veselý Václav, doc. Ing., Ph.D. - fellow researcher
Viszlay Viliam, Ing. - fellow researcher
Units
Institute of Structural Mechanics
- responsible department (1.1.1989 - not assigned)
Institute of Structural Mechanics
- internal (1.1.2016 - 31.12.2016)
Faculty of Civil Engineering
- beneficiary (1.1.2016 - 31.12.2016)
Results
THIENPONT, T.; DE CORTE, W.; SEITL, S. Self-compacting concrete, protecting steel reinforcement under cyclic load: evaluation of fatigue crack behavior. In 18th International Colloquium on Mechanical Fatigue of Metals (ICMFM). Procedia Engineering. AMSTERDAM: Elsevier, 2016. p. 207-213. ISSN: 1877-7058.
Detail
SEITL, S.; THIENPONT, T.; DE CORTE, W. Fatigue crack behaviour: comparing three-point bend test and wedge splitting test data on vibrated concrete using Paris' law. Frattura ed Integrita Strutturale, 2017, vol. 39, no. 11, p. 110-117. ISSN: 1971-8993.
Detail
SEITL, S.; DIEGO LIEDO, R. Numerical study and pilot evaluation of experimental data measured on specimen loaded by bending and wedge splitting forces. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 39, p. 100-109. ISSN: 1971-8993.
Detail
KLON, J.; SOBEK, J.; VESELÝ, V. Spatial Modeling of Wedge-Splitting Test on Cylindrical Specimens Using FEM Software. In Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Netherlands: Elsevier, 2017. p. 427-432. ISSN: 1877-7058.
Detail
SOBEK, J. Proper Nominal Stress Distribution Subjected to Combination of Wedge-Splitting and Bended Geometry Tests. In Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Netherlands: Elsevier, 2017. p. 406-413. ISSN: 1877-7058.
Detail
SEITL, S.; VISZLAY, V.; DOMSKI, J.; KATZER, J. Fracture Mechanical Properties of Cement Based Composites with Various Amount of Waste Aggregates. In Procedia Engineering: Structural and Physical Aspects of Construction Engineering. Procedia Engineering. Elsevier, 2017. p. 345-351. ISSN: 1877-7058.
Detail
KLON, J.; KUCHARCZYKOVÁ, B.; ŠIMONOVÁ, H.; ROZSYPALOVÁ, I.; DANĚK, P.; SCHMID, P.; KERŠNER, Z. Přípravné zkoušky modifikovaného lomového testu excentrickým tahem těles z jemnozrnného cementového kompozitu. Sborník příspěvků konference JUNIORSTAV 2017. Brno: Vysoké učení tehcnické v Brně, Fakulta stavební, 2017. s. 1-6. ISBN: 978-80-214-5473-6.
Detail
KLON, J.; VESELÝ, V. Modelling of size and shape of damage zone in quasi-brittle notched specimens – analytical approach based on fracture-mechanical evaluation of loading curves. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 39, p. 17-28. ISSN: 1971-8993.
Detail
KLON, J.; SOBEK, J.; VESELÝ, V. 3D modeling of wedge-splitting test on cylindrical specimens. Proceedings of the 3rd International Conference: Structural and Physical Aspects of Construction Engineering (SPACE 2016) , High Tatras, Štrbské Pleso, Slovakia, November 9.−11. 2016. 2016. p. 1-2. ISBN: 978-80-553-2643-6.
Detail
SOBEK, J. Consideration of proper nominal stress distribution during combination of wedge-splitting and bended geometry tests. In Proceedings of the 3rd International Conference: Structural and Physical Aspects of Construction Engineering (SPACE 2016) , High Tatras, Štrbské Pleso, Slovakia, November 9.−11. 2016. 2016. p. 1-2. ISBN: 978-80-553-2643-6.
Detail
SOBEK, J.; FRANTÍK, P.; VESELÝ, V. Analytical approximation of crack-tip stress field: Study on efficient determination of coefficients of higher order terms of Williams power expansion. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2016. p. 207-211. ISSN: 1013-9826.
Detail
SEITL, S.; RIOS JIMENEZ, J.; CIFUENTES, H.; VESELÝ, V. Effect of the Load Eccentricity on Fracture Behaviour of Cementitious Materials Subjected to the Modified Compact Tension Test. In MSMF8. Solid State Phenomena. Brno, Česká republika: Trans Tech Publications Ltd, 2016. p. 518-521. ISBN: 978-3-0383-5626-4. ISSN: 1662-9779.
Detail
SEITL, S.; LIEDO, R.; HOLUŠOVÁ, T. Numerical support for specimen loaded by bending and wedge splitting forces for measurement of concrete properties. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-7. ISBN: 978-80-248-3917-2.
Detail
SEITL, S.; THIENPONT, T. Numerical support for study of stress ratio effect on fatigue crack behaviour in three point bend specimen made from vibrated concrete. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. p. 1-6. ISBN: 978-80-248-3917-2.
Detail
SOBEK, J.; FRANTÍK, P.; VESELÝ, V. Analýza rozsahu vhodné aproximace pole napětí v tělese s trhlinou pomocí Williamsovy řady. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. s. 1-7. ISBN: 978-80-248-3917-2.
Detail
KLON, J.; VESELÝ, V. MODELOVÁNÍ ROZSAHU A TVARU LOMOVÉ PROCESNÍ ZÓNY KVAZIKŘEHKÝCH MATERIÁLŮ ZE ZATĚŽOVACÍCH KŘIVEK. In Modelování v mechanice 2016. Ostrava, Česká republika: 2016. s. 1-7. ISBN: 978-80-248-3917-2.
Detail
Responsibility: Sobek Jakub, Ing., Ph.D.