Současný rozvoj poskytuje možnosti pro nové inženýrské či biomechanické aplikace, a to především jejich synergickým vývojem jako jeden komplexní celek, který bude schopen poskytnout kombinaci funkčních, mechanických a elektrických vlastností v rámci zkoumaného tělesa nebo struktury. Modelováním kombinace funkčních vlastností celých systémů, budou navrženy materiálové a biomechanické struktury a systémy interagující se svým okolím.

FSI-S-23-8240

Czech

Hadaš Zdeněk, doc. Ing., Ph.D. - principal person responsible
Bajer Jan, Ing. - fellow researcher
Burša Jiří, prof. Ing., Ph.D. - fellow researcher
Filková Alena, Ing. - fellow researcher
Fischer Jiří, Ing., Ph.D. - fellow researcher
Florian Zdeněk, doc. Ing., CSc. - fellow researcher
Heidrová Aneta, Ing. - fellow researcher
Hrubanová Anna, Ing. - fellow researcher
Hutař Pavel, prof. Ing., Ph.D. - fellow researcher
Jadrná Lucie, Ing. - fellow researcher
Jagoš Jiří, Ing., Ph.D. - fellow researcher
Konvalinka Jan, Ing. - fellow researcher
Kotoul Michal, prof. RNDr., DrSc. - fellow researcher
Kozáková Kamila, Ing. - fellow researcher
Kubíček Radek, Ing. et Ing. - fellow researcher
Marcián Petr, Ing., Ph.D. - fellow researcher
Slabý Vojtěch, Ing. - fellow researcher
Sochor Ondřej, Ing. - fellow researcher
Sosna Petr, Ing. - fellow researcher
Ševeček Oldřich, Ing., Ph.D. - fellow researcher

Institute of Solid Mechanics, Mechatronics and Biomechanics
- responsible department (24.4.2024 - not assigned)
Institute of Solid Mechanics, Mechatronics and Biomechanics
- internal (1.1.2023 - 31.12.2025)
Faculty of Mechanical Engineering
- beneficiary (1.1.2023 - 31.12.2025)

VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Key Issues With Residual Fatigue Life Estimation In Steels, Highly Scattered And Non-Conservative Thresholds, Crack Closure Mechanisms, Influencing Factors, Relevant Material Properties. FATIGUE 2024: Proceedings of the 9th Engineering Integrity Society International Conference on Durability & Fatigue. Farnsfield: ENGINEERING INTEGRITY SOCIETY, 2024. ISBN: 978-0-9544368-7-2.
Detail

POKORNÝ, P.; VOJTEK, T.; KUBÍČEK, R.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Paradox of Shorter Residual Fatigue Life due to Omission of Low-Amplitude Cycles and Its Significance for Testing. Fatigue & Fracture of Engineering Materials & Structures, 2025, vol. 48, no. 2, p. 956-966. ISSN: 8756-758X.
Detail

KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Crack closure development following amplitude changes. APPLIED MECHANICS 2024 - Book of Articles. Žilina: University of Žilina, 2024. p. 94-97. ISBN: 978-80-554-2090-5.
Detail

KOZÁKOVÁ, K.; KLUSÁK, J. Fatigue lifetime predictions of notched specimens based on the critical distance and stress concentration factors. Theoretical and Applied Fracture Mechanics, 2024, vol. 133, no. 104579, ISSN: 0167-8442.
Detail

KOZÁKOVÁ, K.; TRÁVNÍČEK, L.; PODUŠKA, J.; KLUSÁK, J. Critical length parameter of HDPE and its use in fatigue lifetime predictions. Frattura ed Integrita Strutturale, 2024, vol. 19, no. January 2025, p. 211-222. ISSN: 1971-8993.
Detail

KOZÁKOVÁ, K.; KLUSÁK, J.; FINTOVÁ, S. The length parameter for gigacycle fatigue life predictions of notched specimens made of 304L steel. INTERNATIONAL JOURNAL OF FATIGUE, 2024, vol. 178, no. 107980, ISSN: 0142-1123.
Detail

NAVRÁTIL, J.; KRATOCHVÍLOVÁ, M.; RAUDENSKÁ, M.; BALVAN, J.; VIČAR, T.; PETRLÁKOVÁ, K.; SUZUKI, K.; JADRNÁ, L.; BURŠA, J.; KRÄTER, M.; KYOOHYUN, K.; MASAŘÍK, M.; GUMULEC, J. Long-term zinc treatment alters the mechanical properties and metabolism of prostate cancer cells. Cancer Cell International, 2024, vol. 24, no. 1, p. 313 ( p.)ISSN: 1475-2867.
Detail

VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; HUTAŘ, P. Misconception of the Use of 2D Plane Stress Solutions for Free Surfaces of Cracked Bodies and Its Significance for Full Field Measurement Techniques. Advanced Engineering Materials, 2024, vol. 26, no. 19, ISSN: 1527-2648.
Detail

KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Equations for efficient cycle-by-cycle computation of fatigue crack retardation and acceleration due to amplitude changes. Theoretical and Applied Fracture Mechanics, 2024, vol. 133, no. 104547, ISSN: 0167-8442.
Detail

APOSTOLOPOULOS, V.; BOHÁČ, P.; MARCIÁN, P.; STANICZKOVA ZAMBO, I.; PAZOUREK, L.; MAHDAL, M.; NERADIL, J.; NÁVRAT, T.; TOMÁŠ, T. ASO Author Reflections: The Effect of Local Adjuvants on Cortical Bone Following Intralesional Curettage of Bone Tumors. ANNALS OF SURGICAL ONCOLOGY, 2024, vol. 31, no. 9, p. 6333-6334. ISSN: 1068-9265.
Detail

FISCHER, J.; HEIDROVÁ, A.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; JOUKAL, M.; BURŠA, J. Structural parameters defining distribution of collagen fiber directions in human carotid arteries. Journal of the mechanical behavior of biomedical materials, 2024, vol. 153, no. 5, p. 106494-1 (106494-9 p.)ISSN: 1751-6161.
Detail

JAGOŠ, J.; KOHÚT, J.; NOVOTNÝ, T.; KŘIVKA, T.; HÁJEK, P.; FORMÁNEK, M.; LISICKÝ, O.; BURŠA, J. In silico hemodynamical simulations show additional benefits of artery wall softening induced by antihypertensive drugs. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 2024, vol. 245, no. 2024, p. 108016-1 (108016-10 p.)ISSN: 1872-7565.
Detail

APOSTOLOPOULOS, V.; BOHÁČ, P.; MARCIÁN, P.; NACHTNEBL, L.; MAHDAL, M.; PAZOUREK, L.; TOMÁŠ, T. Biomechanical comparison of all-polyethylene total knee replacement and its metal-backed equivalent on periprosthetic tibia using the finite element method. Journal of Orthopaedic Surgery and Research, 2024, vol. 19, no. 1, p. 153 ( p.)ISSN: 1749-799X.
Detail

KUBÍČEK, R.; VOJTEK, T.; JAMBOR, M.; POKORNÝ, P.; NÁHLÍK, L.; POKLUDA, J.; HUTAŘ, P. Solution to the problem of low sensitivity of crack closure models to material properties. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, vol. 130, no. 104243, ISSN: 1872-7638.
Detail

KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Finite element analysis of crack tip plastic zones in 3D. 23rd International Scientific Conference APPLIED MECHANICS 2023 – Book of Abstracts. first. Bratislava: Slovak university of technology in Bratislava, 2023. p. 65-68. ISBN: 978-80-227-5294-7.
Detail

OPLT, T.; VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; HUTAŘ, P. Numerical modelling of fatigue crack closure and its implication on crack front curvature using ΔCTODp. INTERNATIONAL JOURNAL OF FATIGUE, 2023, vol. 171, no. 107570, ISSN: 1879-3452.
Detail

THOMKOVÁ, B.; MARCIÁN, P.; BORÁK, L.; JOUKAL, M.; WOLFF, J. Biomechanical performance of dental implants inserted in different mandible locations and at different angles: A finite element study. JOURNAL OF PROSTHETIC DENTISTRY, 2024, vol. 131, no. 1, p. 128.e1 (128.e10 p.)ISSN: 0022-3913.
Detail

SKÁCEL, P.; BURŠA, J. Need for transverse strain data for fitting constitutive models of arterial tissue to uniaxial tests. Journal of the mechanical behavior of biomedical materials, 2024, vol. 150, no. 150, p. 106194-1 (106194-14 p.)ISSN: 1751-6161.
Detail

TURČANOVÁ, M.; FISCHER, J.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; SKÁCEL, P.; BURŠA, J. Biaxial stretch can overcome discrepancy between global and local orientations of wavy collagen fibres. JOURNAL OF BIOMECHANICS, 2023, vol. 161, no. 12, p. 1-8. ISSN: 0021-9290.
Detail

SNOPIŃSKI, P.; KOTOUL, M.; PETRUŠKA, J.; RUSZ, S.; ŻABA, K.; HILŠER, O. Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy. Scientific Reports, 2023, vol. 13, no. 1, p. 1-16. ISSN: 2045-2322.
Detail

Responsibility: Hadaš Zdeněk, doc. Ing., Ph.D.